Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
plugging the appliance in.plugging the appliance in.plugging the appliance in.plugging the appliance in. plugging the appliance in. Plug the appliance in and press the On switch (7). Press the Function change-over key (6) to select the desired function. The LCD indicator will change according to the keys pressed. You can choose from the following functions: -Program I: -Program I:-Program I:-Program I:-Program I:-Program I: The appliance will dehumidify for an hour when in fuzzy mode. After such time, assuming humidity levels are less than 45%, the compressor will switch off and the fan motor will run at low speed. When operating in fuzzy mode the computer will select the fan speed in accordance with ambient humidity levels. Only when humidity levels exceed 55% will the appliance start to dehumidify again at high speed. -Program II: -Program II:-Program II:-Program II:-Program II:-Program II: 60% When the 60% humidity function is selected, the sensor will gauge ambient humidity levels. When these go above 65% the compressor will switch itself on. The desired ventilation mode can be selected (Initially in silent mode), When ambient humidity levels drop below 55%, the compressor will switch off and will only come back on when humidity levels go above 65%. The appliance will switch itself on and off automatically, maintaining the chosen humidity setting. -Continuous: -Continuous:-Continuous:-Continuous:-Continuous:-Continuous: When the Continuous function is selected, the compressor will start and gauge ambient humidity levels. -Air purification: -Air purification:-Air purification:-Air purification:-Air purification:-Air purification: When fan mode is switched on the compressor will stop and the fan will remain running in silent mode at low speed. 2.2. Defrost The appliance is equipped with an automatic defrost system. This system will switch itself on periodically and the defrost indicator (D) on the LCD screen will come on. This system ensures that the dehumidifier operates correctly. When the process has finished, the appliance will go back to normal operation automatically. 2.3 Notes: • In order to avoid damaging the compressor, do not switch the appliance on and off repeatedly. Apart from being beneficial for the machine, it will also save energy. • If you do happen to switch the appliance on and off continuously then the compressor may remain inactive for a few minutes. This is quite normal for this appliance. • The appliance will not operate if the water tank has not been fitted correctly or if it is full. 2.3. Selecting fan power settings Press the fan power switch if you wish to change the fan speed. The information displayed on the LCD screen will change each time that the key is pressed. High fan speed Low fan speed This fan power selection is not available when using the purification function or in fuzzy mode. 3. HOW TO PROGRAM THE ON/OFF TIME This appliance has an automatic on/off device which can be selected by using the time selector push-button (4). 3.1 Programming the dehumidifier to come on Do this programming with the appliance switched off. Press the time selector (4) and the following will appear on the LCD: ON ONHV After programming it the appliance can be switched back on. • The hour (01h 02h .........23h 24h) will change each time the selector key (4) is pressed (The LCD shows the selected time), (K) • To skip through the hours just keep holding the time selector key (4) down. Once you have selected the appliance's automatic switch-on time, you can then select the desired function and/or fan setting. 3.2. Programming the dehumidifier to go off Do this programming with the appliance running. Press the time selector (4) and the following will appear on the LCD: OFF OFFHV After programming it you can switch it off again. • The hour (01h 02h .........23h 24h) will change each time the selector key (4) is pressed (The LCD shows the selected time), (K) • To skip through the hours just keep holding the time selector key (4) down. If the On switch is pressed during programming then it will be cancelled. One hour later the time remaining from the previous program will be displayed on the LCD. 4. EMPTYING THE DRAINAGE TANK When the water reaches the tank's maximum level the tank full indicator (A) will light up and the dehumidifier will switch itself off automatically. Remove the tank, empty the contents and put it back into position. The dehumidifier will come back on automatically. Carry the tank by its handle and pour away the contents. Hold the tank on both sides while emptying it. 5. CONTINUOUS DRAINAGE In those places where continuous drainage is required, it will be necessary to fit a drain pipe. To this, follow the steps given below: -Take the water tank (10) out. -Open the semi-perforated continuous drainage cover (11). -Insert a flexible drainage tube and attach it securely to the drain outlet by means of a jubilee clip. (Fig. 2) -Put the water tank back in. -When using the continuous ...