Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Vulcan-Hart Dateigröße: 10.64 mb Dateiname: Unterrichtssprache:

NOTE: For proper alignment of the gas tubing, make sure you do not change the position of the stop nuts. 7.Remove the two nuts and two washers from the threaded rod. 8.Hold the burner manifold assembly and remove the two bolts, manifold holding bracket and two washers from the broiler. 9.Reverse the procedure to install. 2. Disconnect the burner tubing from the burner valves. 3. Disconnect the pilot supply tubing from the pilot valve. 4. Remove the two burner valves from the burner manifold assembly. 5. Remove the pilot valve from the burner manifold assembly. – 18 – Burner Manifold Assembly (GHIR44) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the manifold cover assembly as outlined in Covers, Panels and Handles. Oven Pilot Valve (GHCB40) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the control panel cover as outlined in Covers, Panels and Handles. 2.Disconnect the drop pipe from the burner manifold assembly NOTE: For proper alignment of the gas tubing, make sure you do not change the position of the stop nuts. 3.Remove the two nuts and two washers from the threaded rod. 4.Hold the burner manifold assembly and remove the two bolts, manifold holding bracket and two washers from the broiler. 5.Reverse the procedure to install. 2. Disconnect the pilot tubing from the oven pilot valve. 3. Remove the oven pilot valve from the gas supply tube. 4. Reverse the procedure to install. Oven Burner Valve (GHCB40) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the control panel cover as outlined in Covers, Panels and Handles. – 19 – 2. Disconnect the oven burner valve from the oven gas supply tube and the union. 3. Reverse the procedure to install. Pilot Outage Protection Valve (GHCB40) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the control panel cover as outlined in Covers, Panels and Handles. 2. Remove the lower front panel as outlined in Covers, Panels and Handles. 3.Disconnect the pilot valve tubing from the pilot outage protection valve. 4.Remove the oven bottom assembly as outlined in Covers, Panels and Handles. 5. Loosen the b-nut and remove the ignitor wire from the bracket. – 20 – 6. Remove the two bolts from the pilot outage protection valve and the bracket. 7. Disconnect the pilot outage protection valve from the union and the thermostat. 8. Remove the pilot outage protection valve and the ignitor wire from the broiler. 9. R...

Herunterladen

Geben Sie zwei Ziffern: