Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: O'Brien Dateigröße: 243.77 kb Dateiname: Unterrichtssprache:

O’BRIEN FINS LINE-LOCK ADJUSTABLE FIN: The Line-Lock Adjustable Fin features a 3 point adjustment system to allow exact fin positioning in any direction. The Line-Lock Fin is easily adjusted by loosening the 3 set screws, positioning the blade in the desired position and then tightening the 3 set screws. O’Brien slaloms equipped with the Line-Lock fin are pre-set with the best overall fin position for that ski. Before adjusting the fin from the stock setting it is recommended to mark that position on your fin so that it can be easily positioned back to stock. Please refer to the chart below for suggested fin adjustments to help maximize the performance of your ski. Remember small adjustments will significantly change how your ski performs. A.R.C. (Adjustable Radius Control) FIN: The A.R.C. Fin features a performance blade with elliptical slotted screw holes for customized horizontal adjustments. The A.R.C. Fin is easily adjusted by loosening the 6 phillips head screws on the top of the fin, positioning the blade either further forward or back, and then re-tightening the 6 phillips head screws. Before changing from the stock setting it is recommended to mark that position on your fin so that it can be easily positioned back to stock. PROBLEM SOLUTION Difficult to initiate turn Too fast through off-side turn only Too much ski tip in the water during both the on and off-side turns Too much ski tip in the water during off-side turn, causing skier to break at the waist Too much ski tip out of the water during on- side turn Not enough angle after the turn to quickly cross wakes Ski is overturning and gets too much angle across the wakes Ski changes edges too slowly Ski is too responsive Decrease fin depth and/or move fin backward Move fin back or tilt front of fin down Increase fin depth and/or move fin forward Move fin forward or tilt front of fin up Move fin backward Move fin forward Move fin forward Decrease fin depth and/or move fin backward Increase fin depth and/or move fin forward CARE AND MAINTENENCE INSTRUCTIONS 1. Do not leave your ski exposed to the sun or bad weather for long periods of time. We recommend purchasing and storing your ski in a slalom case when not in use. 2. Rinse ski after use to remove sand, dirt, and salt water. Do not clean ski with abrasive materials. Use only a soft cotton cloth. NOTES FROM PLACE STAMP HERE PO BOX 97087 REDMOND, WA 98073 O’BRIEN CUSTOMER RETURN/WARRANTY POLICY 1. All customer returns (warranty and non-warranty) require an approved return authorization issued by customer service or the shipment will be refused and sent back to the con sumer at the consumer’s expense. 2. O’Brien Warranty: All O’Brien Product is warranted to the original retail purchaser to be free of defects in material and workmanship except as provided in 2A and 2B below. These warranties are not transferable and are effective from the original date of retail purchase as evidenced by retail proof of purchase, unless otherwise specified ...

Herunterladen

Geben Sie zwei Ziffern: