Stimmen - 5, Durchschnittliche Bewertung: 3.4 ( )

Hersteller: JVC Dateigröße: 6.12 mb Dateiname: 2d40c72e-a9a4-4e0e-bfa2-a4add787e9ac.pdf Unterrichtssprache:

while the recorder was working. Delete the “Found 001” programme. (. pg. 58) EN 99 ON-SCREEN MESSAGES MESSAGE DESCRIPTION CAN NOT MODIFY LIVE MEMORY TIME, MORE CAPACITY NEEDED DELETE UNWANTED PROGRAMME THEN RETRY There is not enough memory on the hard disk drive for Live Memory Playback. To increase the free space, dub some programmes to cassettes or delete the unwanted programmmes. (. pg. 63, 58) DO YOU WANT TO DELETE SELECTED PROGRAMME? Appears when you tried to delete the selected programme from the hard disk drive. Make sure you really want to delete the programme. (. pg. 58) DO YOU WANT TO DELETE SELECTED PROGRAMME INFORMATION? Appears when you tried to delete the selected programme information from the hard disk drive. Make sure you really want to delete the programme information. (. pg. 58) DO YOU WANT TO DELETE SELECTED CASSETTE INFORMATION? Appears when you tried to delete the selected cassette’s all information from the hard disk drive. Make sure you really want to delete the cassette’s information. (. pg. 58) INSERT CASSETTE Appears when you tried to modify the information for VCR Navigation, but the cassette is not loaded. To modify the information for VCR Navigation, the cassette must be loaded. (. pg. 56) CAN NOT MODIFY INDEX It is not possible to modify the index of a programme while the hard disk drive is in recording. Wait until the recording finishes or stop recording to modify the index. (. pg. 56) NO CASSETTE For VCR Navigation, load a cassette before pressing NAVIGATION. (. pg. 37) “NAVIGATION” IS SET TO “OFF” For VCR Navigation, set “NAVIGATION” to “ON” on the “VCR SET UP 1” screen, then press NAVIGATION. (. pg. 37, 81) UNABLE TO SET TIMER PROGRAMME DUE TO SHORTAGE OF CAPACITY DELETE UNWANTED PROGRAMME FROM HDD There is not enough memory on the hard disk drive for recording. To increase the free space, dub some programmes to cassettes or delete the unwanted programmmes. (. pg. 58) PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMME You can programme this recorder to timer-record as many as 16 programmes. To programme more, you need to cancel a timer programme already set. (. pg. 50) PLEASE ADJUST CLOCK BEFORE TIMER PROGRAMMING To set the timer programme, the clock must be set in advance. (. pg. 86) GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN RETRY To set the timer programme using the SHOWVIEW system, the Guide Program number must be set in advance. (. pg. 85) SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO. THEN RETRY An invalid SHOWVIEW number is input. (. pg. 46) 100 100 N TROUBLESHOOTING (cont.) ON-SCREEN MESSAGES (cont.) MESSAGE DESCRIPTION PROGRAMME NOT COMPLETED PROGRAMME OVERLAPPED PLEASE CONFIRM AND MODIFY The timer programme you set is overlapping with another timer programme. (. pg. 50) TIMER PROGRAMMING STOPPED Appears when you stop setting timer programme. PROGRAMME COMPLETED PRESS “OK” THEN [#] TO ENTER TIMER STANDBY MODE Timer programming is completed properly. TIMER RECORDING WILL START WITHIN 5 MIN INSERT CASSETTE AND PRESS [#] The recorder is not in the timer-standby mode. The timer recording will start in about 5 minutes. REMAINING CAPACITY IS SMALL DELETE UNWANTED PROGRAMME FROM HDD The remaining capacity of the hard disk drive is in short for the current recording. (. pg. 58) CAPACITY IS FULL, RECORDING STOPPED The recording stopped due to the shortage of the free space on the hard disk drive. CAPACITY IS FULL, UNABLE TO RECORD DELETE UNWANTED PROGRAMME FROM HDD The recording cannot be started due to the shortage of the free space on the hard disk drive. (. pg. 58) TITLE MEMORY IS FULL, UNABLE TO RECORD DELETE UNWANTED PROGRAMME FROM HDD The remaining capacity is full for registration for the Navigation system. The recording cannot be started even though the capacity for the recording is enough. (. pg. 58) COPY PROHIBITED, UNABLE TO RECORD ON HDD It is not possible to record a copy-protected programme. NO PROGRAMME TO PLAYBACK There is no recorded programme on the hard disk drive. UNABLE TO GO BACK ANYMORE It is not possible to go back beyond the start point of the recording for Live Memory Playback. (. pg. 29) DUBBING COMPLETED Appears when Easy Dubbing is completed. (. pg. 63) DUBBING STOPPED Appears when Easy Dubbing is stopped. (. pg. 63) TAPE ENDED, DUBBING STOPPED Appears when the tape ends during Easy Dubbing. (. pg. 63) COPY PROHIBITED It is not possible to dub a copy-protected programme. IMPOSSIBLE DURING DV DUBBING OR RECORDING IN DV MODE When input mode is set to “D-1” or during recording in the recording speed of DV, other operations such as playback of another programme, etc. are not possible. CAN NOT SELECT PROGRAMME RECORDED IN DV MODE During recording, you cannot playback another programme recorded in the recording speed of DV. CAN NOT SELECT PROGRAMME RECORDED OTHER THAN IN DV MODE When you create a play list, you cannot include scenes recorded in the recording speed of DV and scenes recorded in another mode in the same play list. QUESTIONS AND ANSWERS EN 101...

Herunterladen

Geben Sie zwei Ziffern: