Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: JVC Dateigröße: 1.37 mb Dateiname: 080121_MTII_UG_EN02.pdf Unterrichtssprache:

This feature is useful for journalists—they can place a marker before each question during an interview. It is also great for recording bands—markers can be placed between each song. Or, if gathering sound effects, a marker can be placed before each noise (as opposed to starting and stopping recording for each individual sound). > NOTE: The [MENU] button is without function while recording in MP3 format. MicroTrack II User Guide User Guide Playback Now that a file has been recorded, you can play it back to check the recording. 1 Connect the outputs of MicroTrack II so you can hear the playback You can use any combination of the following: • <• Plug a pair of headphones into the 1/8” jack on MicroTrack II • <• Connect the RCA outputs to an amplifier or mixer 2 Use the [MENU] button and [NAV] wheel to navigate to the “Files” menu 3 Use the [NAV] buttons to select a file to play Press in on the [NAV] wheel to begin playback of the current file 4 While an audio file is playing, you can: <• Adjust the playback volume using the [VOLUME] button • <• Delete the file by pressing the [DEL] button • <• Immediately begin recording a new file by pressing the [REC] Button • <• Loop playback of the file using the procedure explained in the Loop Playback section below • <• Fast-forward through the file by holding the [NAV] wheel up • <• Skip ahead to the next file by pressing up on the [NAV] wheel <• Return to the beginning of a file by pressing down on the [NAV] wheel If you are within the first three seconds of a file, pressing down will skip back to the previous file • <• Rewind the file by holding down the [NAV] wheel • <• Pause playback by pressing in on the [NAV] wheel Press in again to resume playback Additional [NAV] wheel functions when an audio file is paused or stopped include: <• Return to a previous file by pressing down on the [NAV] wheel • <• Resume playback by pressing in on the [NAV] wheel MicroTrack II User Guide Loop Playback MicroTrack II will allow you to loop a section of an audio file This can be useful when practicing parts or studying dictation The method for looping a file requires setting a start and end point, and is accomplished as follows: 1 To engage Loop Playback, press and hold the [MENU] button for over 2 seconds while the file is playing The loop icon will appear on the lower left of the screen 2 Press the [MENU] button once when you reach the start point of the loop A small “+” will appear to the left of the loop icon 3 Press the [MENU] button a second time when you reach the end point of your loop The section will begin to loop immediately A small “+” will appear to the right of the loop icon 4 Pressing the [MENU] button a third time will exit loop mode While using Loop Playback mode, you can: <• Adjust the playback volume using the [VOLUME] button <• Delete the file by pressing the [DEL] button <• Immediately begin recording a new file by pressing the [REC] Button <• Fast-forward through the file by holding the [NAV] wheel up <• Skip ahead to the next file by pressing up on the [NAV] wheel <• Return to the beginning of a file by pressing down on the [NAV] wheel <• Rewind the file by holding down the [NAV] wheel <• Pause playback by pressing in on the [NAV] wheel Press in again to resume playback Additional [NAV] wheel functions when an audio file is paused in Loop Playback mode include: <• Return to a previous file by pressing down on the [NAV] wheel <• Resume playback by pressing in on the [NAV] wheel MicroTrack II User Guide 5 - Using MicroTrack II with a Computer MicroTrack II will interact with a computer for multiple purposes • MicroTrack II will charge its battery with power it receives from the computer • The contents of the CF card or Microdrive can be transferred to the computer • Files can be uploaded from a computer to MicroTrack II Please refer back to the section titled “Connect to PC” to learn how to properly connect the device Charging MicroTrack II from the Computer MicroTrack II will automatically begin recharging the internal battery any time power is received at the MicroTrack USB port Depending on the manufacturer of your computer, your computer may need to be powered on to provide power to the USB port An animated battery symbol will be displayed in the right upper corner of the LCD on MicroTrack II to indicate that the device is being charged When the battery is fully charged, the animation will stop, the battery symbol will appear solid, and a check mark will be displayed next to the battery symbol, indicating that the charging process has finished > Note: If MicroTrack II is off and you connect it to the USB port of computer that is running, MicroTrack II will power up and enter host mode. It is suggested that you close the connection from the computer or exiting host mode BEFORE disconnecting the MicroTrack II USB cable. Transferring Audio Files to a Computer When connected to a computer, MicroTrack II will appear as a removable disk‡ on that computer To transf...

Herunterladen

Geben Sie zwei Ziffern: