Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
ENGLISH
Quick Install Guide
Installation
mydlink Portal
Enhanced Wireless N Day/Night Home Network Camera
Note: If your router supports WPS, please follow the WPS Setup steps below.
After registering your DCS-942L camera with a mydlink account in the Camera Installation
Wizard, you will be able to remotely access your camera from the www.mydlink.com
Step 1:
website. After signing in to your mydlink account, you will see a screen similar to the
Connect the included Ethernet cable to the network cable connector located on the
following:
bottom panel of the DCS-942L and attach it to the network.
Step 1:
Step 2:
Open Internet Explorer and go to http://www.mydlink.com, then sign into mydlink.
Attach the external power supply to the DC power input connector located on the
bottom panel of the DCS-942L and connect it to your wall outlet or power strip. Power is
Step 2:
confirmed when the green LED Power Indicator located on the back panel.
Select your camera from the device list, and your camera’s Live View will appear.
Thank you for purchasing the DCS-942L Enhanced Wireless N Day/Night Home Network
Step 3:
Camera. Fol ow the easy steps in this guide to properly set up your camera. Please verify that
Insert the DCS-942L Driver CD in the CD-ROM drive. If the CD Autorun function does
al the package contents below are available.
not automatically start on your computer, go to Start > Run. In the run box type
D:\autorun.exe (where D: represents the drive letter of your CD-ROM drive) and click
Package Contents
OK. When the autorun screen appears, click Install and follow the on-screen instructions.
Step 4:
DCS-942L Enhanced Wireless N Day/Night Home Network Camera
Click on the Start button to start the wizard, and
follow the instructions from the Installation Wizard
to finish setting up your camera.
Camera Stand and Mounting Kit
CAT-5 Ethernet Cable
WPS Setup
Technical Support
Alternatively, you may create a WPS connection if your router or access point supports
Having trouble instal ing your new product? D-Link’s website contains the latest
WPS. To create a WPS connection:
Power Adapter
user documentation and software upd ates for D-Link products. U.S. and Canadian
Step 1:
customers can contact D-Link Technical Support through our website or by phone.
Press and hold the WPS button on the back of the camera for three seconds. The blue WPS
status LED above the button will blink.
United States
Canada
CD with drivers and software
Telephone: (877) 453-5465
Telephone: (800) 361-5265
Step 2:
Internet: http://support.dlink.com
Internet: http://support.dlink.ca
If any of the above items are missing, please contact your reseller.
Press the WPS button on your wireless router or access point within 60 seconds. On some
System Requirements
routers, you may need to log into the web interface and then click an onscreen button to
activate the WPS feature. If you are not sure where the WPS button is on your router or
Copyright ©2011 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.
Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and
• Computer with Microsoft Windows® 7, Vista®, or XP, MAC OS X10.5 or above
access point, please refer to your router’s user manual.
802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network
• PC with 1.3GHz or above; at least 128MB RAM
traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will
adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product
• Internet Explorer 7 or above , Firefox 3.5 or above, Safari 4 or above, Chrome 2 or above
The DCS-942L will automatically create a wireless connection to your router. While
appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
• Existing 10/100 Ethernet-based network or 802.11n wireless network
connecting, the green LED will flash and your camera will reboot.
DCS-942L
Version 1.0(US) | July 14, 2011 6DCS942LQ.01G