Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
ENGLISH
Quick Install Guide
Installation
mydlink Portal
Note: If your router supports WPS, please follow the WPS Setup steps below. Your camera contains
HD Wireless N Pan/Tilt Network Camera
an internal antenna and it is not necessary to attach the external antenna unless you would like to
After registering your DCS-5222L camera with a mydlink account in the Camera Installation
boost your signal or install an outdoor enclosure. You must select which antenna you want to use in
Wizard, you will be able to remotely access your camera from the www.mydlink.com website.
the Setup > Wireless section from the camera’s web configuration utility (internal is set by default).
After signing in to your mydlink account, you will see a screen similar to the following:
Step 1:
Step 1:
Connect the included Ethernet cable to the network cable connector located on the bottom
Open Internet Explorer and go to http://www.mydlink.com, then sign into mydlink.
panel of the DCS-5222L and attach it to the network.
Step 2:
Step 2:
Select your camera from the device list, and your camera’s Live View will appear.
Attach the external power supply to the DC power input connector located on the bottom
panel of the DCS-5222L and connect it to your wall outlet or power strip. Power is confirmed
Thank you for purchasing the DCS-5222L HD Wireless N Pan/Tilt Network Camera. Fol ow
when the green LED Power Indicator located on the back panel.
the easy steps in this guide to properly set up your camera. Please verify that al the package
contents below are available.
Step 3:
Insert the DCS-5222L Driver CD in the CD-ROM drive. If the CD Autorun function does
Package Contents
not automatically start on your computer, go to Start > Run. In the run box type
D:\autorun.exe (where D: represents the drive letter of your CD-ROM drive) and click OK. When
DCS-5222L HD Wireless N Pan/Tilt Network Camera
the autorun screen appears, click Install and follow the on-screen instructions.
Includes Detachable Antenna
Step 4:
Click on the Start button to start the wizard, and follow the
Camera Remote
instructions from the Installation Wizard to finish setting up
your camera.
Mounting Kit
CAT-5 Ethernet Cable
Technical Support
WPS Setup
Having trouble instal ing your new product? D-Link’s website contains the latest
Alternatively, you may create a WPS connection if your router or access point supports WPS. To
user documentation and software upd ates for D-Link products. U.S. and Canadian
Power Adapter
create a WPS connection:
customers can contact D-Link Technical Support through our website or by phone.
Step 1:
United States
Canada
CD with drivers and software
Press and hold the WPS button on the back of the camera for three seconds. The blue WPS
status LED above the button will blink.
Telephone: (877) 453-5465
Telephone: (800) 361-5265
Internet: http://support.dlink.com
Internet: http://support.dlink.ca
If any of the above items are missing, please contact your reseller.
Step 2:
System Requirements
Press the WPS button on your wireless router or access point within 60 seconds. On some
routers, you may need to log into the web interface and then click an onscreen button to
Copyright ©2012 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.
• Computer with Microsoft Windows® 7 (32/64bit), XP (32/64bit),Vista® (32/64bit), Mac
activate the WPS feature. If you are not sure where the WPS button is on your router or access
Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and
OS®X 10.5 or above
802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network
point, please refer to your router’s user manual.
traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will
• PC with 1.3GHz or above; at least 128MB RAM
adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product
appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
• Internet Explorer 6 or above , Firefox 3.5 or above, Safari 4 or above, Chrome 2 or above
The DCS-5222L will automatically create a wireless connection to your router. While connecting,
• Existing 10/100 Ethernet-based network or 802.11n wireless network
the green LED will flash and your camera will reboot.
DCS-5222L
Version 1.0 | December 22, 2011 6DCS5222LQ01G