Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
3. Switches 9 & 10 (7) are for the zone/channel setting on the transmitter. The four zones are as follows: Switch 9 Switch 10 Channel Tune ON ON 1+12VDC Classical OFF ON 2 Westminster ON OFF 3 Ding Dong OFF OFF 4 Whistle TONE, RELAY AND VOLTAGE OUTPUT 1. Each of the four transmitter zones (selectable by switch 9 & 10) will sound a tone and activate the corresponding relay on the receiver. 2. Each of the form “C” relays is rated for 24 VDC at 3 Amp maximum current. 3. The 12 VDC output will activate when the transmitter is set to zone 1. The voltage duration will last for four seconds and has a maximum current of 400mA. 5. 4. The channel 1 relay and the 12 VDC output can be set to operate for 4 seconds or 10 minutes. To change the duration, locate the jumper (8) on the upper right hand corner of the circuit board. When the jumper is covering both pins, the output time is 4 seconds. When the jumper is only covering one pin, the output time will be 10 minutes. NOTE: Whenever a change is made to the time jumper or the dip switches, the receiver must be turned “OFF” and then back “ON” to operate properly. For maximum range between the transmitter and receiver, the receiver should be mounted horizontally on a wall and as high off the floor as possible. Although the maximum range is about 3000 feet, things such as hills, trees, metal siding and stucco can all reduce the range. Frequency: 433.92 MHz Operating voltage: 12VDC 12 volt DC output current: 400 mA maximum Relay output rating: 24VDC at 3 Amp 6. TECHNICAL SUPPORT If you encounter any difficulty in the operation of this product after reading the manual, please contact us. You can reach us by phone at 605-356-2772 from 8:30 AM to 5:00 PM Monday through Friday (Central Standard Time). We will be happy to answer your questions and help you in any way we can. WARRANTY Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resulting from accident, abuse, act of God or improper operation. If this product does become defective, simply return it to Dakota Alert. Please include a note describing the troubles along with your name and return address as well as the original sales receipt. If the product is covered under warranty it will be repaired or replaced at no charge. If it is not covered by warranty, you will be notified of any charges before work is done. 7. Dakota Alert, Inc. 109 W. Main St. P0 Box 130 Elk Point, SD 57025 Phone: (605) 356-2772 Fax: (605) 356-2584 Web: ...
Dieses Handbuch ist für folgende Modelle:Überwachungstechnik - WIRELESS RECEIVER WR-3000 (51.23 kb)