Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
To ease installation, we suggest that you READ THIS MANUAL before beginning your installation. This book is provided as a GENERAL GUIDELINE and the information contained herein may differ from your vehicle. DISCLAIMER: Crimestopper Security Products, Inc. and its vendors shall not be liable for any accident resulting from the use of this product. This system is designed to be professionally installed into a vehicle in which all systems and associated components are in perfect working condition. TECHNICAL SUPPORT (800)-998-6880 Monday -Friday 8:00am -4:30pm Pacific Time Website: CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 S. TAPO STREET SIMI VALLEY, CA. 93063 REV 3.2009 1. Contents 1. Contents 1. Car DVR Boxx 1 2. 1 GB SD Card 3. IR cable x 1 4. Remote Controller x 1 5. Power Cable x 1 6. English User Manual x 1 2. Installation Input/Output Ports Front View Power Connector Secure Digital Card Car Monitor IR Sensor 1GB SD Card Included Back View Video Input 4 Video Input 3 Video Input 2 Video Input 1 Reverse CCD Inside CCD Turn Signal CCD Front CCD Power Port Description Power Connect Description 1. YELLOW ---------------TO BATTERY IN. 2. RED ---------------------TO ACC IN. 3. BROWN ----------------TO DOOR TRIGGER (–). 4. BROWN/WHITE------TO DOOR TRIGGER (+). 5. GREEN -----------------TO HANDBRAKE. 6. BLUE --------------------DC 12V OUT (200mA).(Connect indoor camera power) 7. WHITE ------------------TO PARKING LIGHT. 8. WHITE / RED----------TO REVERSE. 9. PINK/WHITE-----------NC. 10. PINK ---------------------NC. 11. BLACK ------------------TO GND. 12. BLACK ------------------TO GND. Remote Controller Key Function Item Function Description -1- POWER Toggle key to switch power ON/OFF. -2- MENU Press to enter system setup. -3- EXIT Press to exit Menu. -4- OK During Menu Mode, press to confirm selection and enter sub-selection. -5- RESET Toggle key to force switch to record V3 (indoor camera) and back to original camera record. With ignition ON, press reset button to switch V1 to V3. -6- p• During Menu Mode,selection up/down operation. During Normal Mode,Press • (2x) to Zoom in.Press • (2x) to Zoom out. -7- t• During Menu Mode,selection left/right operation. Menu Structure MENU Set Clock SD Card Format Boot Up Indoor Record Interval Adjust time/date. Format: hh:mm:ss, mm/dd/yy NTSC/PAL two systems CCD video input selection. Even user selection not correct, DVR still can get the video. Recording intervals of DVR after Ignition ON. If user selects “0 seconds”, then box will bypass boot up record. If user select “OFF”, then box will bypass all function which relative to dome trigger event. TV Output System NTSC/PAL two systems output selection. Video Input System Format SD card to FAT format. This operation will erase all folders/files which inside card. Recording intervals of DVR after door open and close with Ignition OFF. Version of current S/W which inside box. Selection for playback video files. After select one area to entry, one file list will be display by file’s created date/time. User can select any file to entry playback mode. Ignition Off Dome Record Interval S/W Version Playback Selection DVR Operation Algorithm (1) ACC On Before Door Open: Boot Up Indoor Record Interval: Default = 0 seconds Choices = 0 seconds / 10 seconds / 20 seconds / 30 seconds / OFF (No Dome Trigger) Force to record indoor CCD (V3) for user specify time interval and then switch to front CCD (V1). Every 5 minutes will generate one new video file to record contiguously. (2) Door Open without ACC On: Ignition Off Dome Record Interval: Default = 30 seconds. Choices = 30 seconds / 1 minute / 2 minutes / 3 minutes Start to record indoor CCD (V3) for user specified time interval. If ignition turned on during this period, the DVR will start Boot Up Record function immediately (see item (1)). (3) Event Trigger: (a) Handbrake Event On: This event will stop current recording operation immediately and let the video source still output (Watch only not record). (b) Handbrake Event Off: This event will let recording operation resume. (c) Turn signal light on event: This event will switch to turn signal CCD (V2) immediately and start recording. Every 3 minutes generate one file. (d) Turn signal light off event: This event will switch back to V1 immediately and start recording V1. (e) Dome light on event: This event will switch to V3 immediately and start recording. Every 5 minutes will generate one new video file. (f) Dome light off event: This event will let DVR record V3 extra 10 seconds then stop record. Then switch back to V1 immediately and start to record V1. But if user select zero seconds in (Boot Up Indoor Record Interval), box will switch back to V1 immediately after closing the door. (g) Reverse on event: This event will switch to reverse CCD (V4) immediately and start recording. Every 3 minutes generate one file. (h) Reverse off event: This event will switch back to V1 immediately and start recording V1. (J) Reset...