Login:
Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Anleitung Crimestopper Security Products, modell RS901 RS900ER

Hersteller: Crimestopper Security Products
Dateigröße: 138.85 kb
Dateiname: rs900_1_ops.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


This system is the most advanced and reliable Remote Start system available on the market today. This booklet contains the information necessary for using & maintaining your remote start system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at (800) 998-6880. *IMPORTANT INFORMATION-MODEL RS901* When RS901 remote starter is activated by an ALARM SYSTEM REMOTE CHANNEL OUTPUT, or a FACTORY KEYLESS ENTRY SYSTEM the following features may not be available depending on the type of input used to trigger the Remote Start: · TIMED SELF-START MODE · INFINITY RUN MODE This device complies with FCC Rules part 15. Operation is subject to the following two conditions: 1) This device may not cause interference, and (2) this device must accept any interference that may be received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modification could void the user's authority to operate the equipment. OPERATION CAUTIONS AND WARNINGS OPERATION CAUTIONS AND WARNINGS CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDOR shall not be liable for any accident resulting from the use of this equipment. This system is designed to be professionally installed into a car or vehicle in which all items, such as parking brake and all associated components, door switches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect working condition. IT IS ABSOLUTELY THE OWNER’S SOLE RESPONSIBILITY TO: a) Understand the operation of this system and its safety features. b) Check for proper operation of these safety features prior to accepting delivery of the vehicle from the installation facility. c) Check and maintain the condition of the vehicle and all items relative to the proper operation of this system and its safety features d) Always leave the doors and windows closed and locked to protect against accident and theft. DO NOT remote start the vehicle in a closed garage. Make sure that the garage door is open or there is adequate ventilation. Failure to observe this rule could result in injury or death from poisonous Carbon Monoxide fumes. DO NOT install the Remote Engine Starting System on MANUAL TRANSMISSION vehicles or vehicles which can not be protected by locking doors and closing windows. Such vehicles are, but not limited to: motorcycles, convertibles, and any open air vehicle. These vehicles can be easily entered and put in gear, thus creating a hazardous condition. IT IS ABSOLUTELY THE OWNERS SOLE RESPONSIBILITY to make certain the vehicle PARKING BRAKE is properly adjusted and will hold the vehicle securely in all parking conditions, and to periodically check and maintain proper adjustment. OPERATING THE REMOTE TRANSMITTER The transmitter supplied with this system has Four (4) buttons / channels. The button configuration is Factory-set and unchangeable: TRANSMITTER BUTTONS #3 #1 START LOCK TRUNK POP #2 UNLOCK #4 REMOTE START REMOTE ENGINE CONTROL REMOTE ENGINE CONTROL The system has three remote modes of controlling the engine. · Remote starting the engine · Turning off a remote started engine · Idle Down/Infinity Run modes REMOTE ENGINE STARTING - SUCCESSFUL START: 1) Press Remote Start button for at least one second. 2) Parking lights turn on solid, Ignition/Acc On, Doors lock, and Sensor disable output turns on (optional for remote start use with a host alarm). 3) After 4 seconds Starter Motor engages, Parking lights and Acc circuits turn off. 4) Engine Starts and Runs. Parking Lights and Acc turn back on. 5) Engine will remain running for programmed run time until reset with Brake pedal or turned off with remote transmitter. AFTER 0IGN 4 STARTERSEC SOLID START ALARM SENSOR REMOTE ENGINE STARTING - UNSUCCESSFUL START: 1) Press Remote Start button for at least one second. 2) Parking lights turn on solid, Ignition/Acc. On, Doors lock, Sensor disable output turns on(for alarms). 3) After 4 seconds Starter Motor engages, Parking lights and Acc. circuits turn off. 4) Starter Cranks, (up to10 seconds MAX) but engine does not start. 5) System shuts down for 4 seconds, then attempts to restart the engine a 2nd and 3rd time. a) if engine starts on 2nd or 3rd attempt, see steps 4 & 5 above of "Successful Start". b) If Third attempt fails to start engine, the system will turn off and doors will remain locked. NO FURTHER ATTEMPTS WILL BE MADE AUTOMATICALLY TURNING OFF A REMOTE STARTED ENGINE: 1) Engine is running in Remote Start (Parking lights ON). 2) Press Remote Start button for at least one second. 3) Engine turns OFF, Parking Lights turn OFF, Doors remain locked START REMOTE ENGINE CONTROL REMOTE ENGINE CONTROL IDLE DOWN MODE This mode allows the unit to take over operation of the parked vehicle while the ignition key is removed and you exit the vehicle. The vehicle is put into a remote running condition before you ...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien