Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: EverFocus Dateigröße: 1.01 mb Dateiname: 6e3c484e-9785-442d-a63e-8592c3644984.pdf Unterrichtssprache:

YES: Select YES to update system software by pressing SELECT or tilt wheel of the mouse to start. NO: Select NO for canceling updating by pressing SELECT or tilt wheel of the mouse to start. Note: 1. System will ask you to stop recording if you confirm to update when system is recording. 2. USB device must be inserted properly before updating system software. 3. Do not remove USB device when you are updating system software, it may cause crash to the machine. 52 (5) LANGUAGE: System language can be set in different languages. Note: The available language depends on the different areas and countries. (6) QUICK PLAY: Set up the start play time of the normal play mode. TIME: Quick play time, 5 to 59 minutes ago. The default value is 10 minutes. ON: Enable quick play. The video played time is the immediate play time from now. OFF: Disable quick play. Videos will start to be played from the end point of the last play. Note: The recommendatory quick play time is 10 minutes. The video cannot be played due to the video file is not stored to HDD yet if you set a quick play time too short. (7) SYSTEM PASSWORD ENABLE : YES: Select YES to enable the password function. NO: Select NO to disable the password function. (8) PASSWORD and RIGHTS : The login passwords here are used to operate and set up this machine. The different login passwords indicate the different level of users, and no login name is necessary. The digit will show up instead of a “..” sign when the cursor is moved on it. Dial the Jog to change the digit on which the cursor is located of the password, and press ENTER/DISPLAY to go next/last digit. The available digits are 1 to 9. There are three system access levels and one none access level. The below chart on the next page shows the rights of each level. Note: If the passwords of different levels are set the same, you will enter a higher level when you login. For example, you will login to the ADMINISTRATOR level if the password of ADMINISTRATOR and GENERAL levels are the same. 53 Note: After upgrading system software, please do the following actions before recording: 1. Load System Default in System Setup Menu. 2. Delete disk in Disk Setup Menu. User Level and Right V. 1.0 LEVEL RIGHT LEVEL-3 LEVEL-2 LEVEL-1 NONE ACCESS ADMINISTRATOR OPERATOR GENERAL ---DISPLAY OK OK OK OK MODE OK OK OK OK ZOOM OK OK OK OK SELECT OK OK OK NO SEQ OK OK OK NO CALL OK OK NO NO MENU OK NO NO NO COPY OK NO NO NO SEARCH OK NO NO NO PLAY OK NO NO NO STOP OK NO NO NO REC OK NO NO NO PAUSE OK NO NO NO Note: The above table will be updated if there is any change. 54 4. RECORDING 4.1 INSTANT RECORDING Press the Record key to start to record immediately. When REC is pressed, the pictures being monitored will be recorded in the HDD. •The recording rate, recording quality and recording speed can be set in the REC CAMERA SETUP MENU. •A “ RECORD ” sign appears in the record status bar. Press STOP key to stop instant recording. •The STOP key can be activated only in instant recording mode, but not available in the schedule or event recording mode. STOP • When the HDD is full, the machine will stop recording automatically or overwrite from the beginning of the HDD. It depends on the setting in the RECORD SETUP MENU. Note: If STOP key is pressed when machine is recording and playing video, the playing function will be disabled first. 55 4.2 SCHEDULE RECORDING Set up the DAY, START time, END time and then enable the SET in the SCHEDULE SETUP MENU. Please refer to SCHEDULE SETUP MENU, to see setting procedure and more details. 4.3 EVENT RECORDING We define two event types which are ALARM and MOTION events can be recorded. After the event recording is enabled, the EDR1640/1620/920 will start an event recording when an event occurs. In order to start an event recording, you need: 1. Enable the event in each event setting first. For example, to enable alarm 2 in the ALARM SETUP MENU(shown below). You can also enable more alarms, or add a motion event. 56 2. After enabling an event, you need to set a time zone in the SCHEDULE SETUP MENU. An event recording has to be included in a scheduled time zone. You can refer to SCHEDULE SETUP MENU to set up a time zone which you would like to record when an event occurs. 3. When the event and schedule are set, you can enter the CAMERA SETUP MENU to set the event recording speed (IPS) of a camera in the time zone you set. Note: You can set the time zone from 00:00 to 00:00 daily in the SCHEDULE SETUP MENU, and set the normal record speed as 0 IPS in the CAMERA SETUP MENU if you only need events recording all the time. 4.4 ALARM INPUT RECORDING (Input trigger) EDR1640/1620/920 provides a record function which is triggered by external signal via the 19th pin of the ALARM INPUT / OUTPUT port. When the record input signal is pulled low constantly, EDR1640/1620/920 will start to record. The system will stop recording when the record input signal is not pulled low. Note: Please check APPENDIX C to see other avai...

Herunterladen

Geben Sie zwei Ziffern: