Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Überwachungstechnik - VB-M40 (1.73 mb)
Überwachungstechnik - VB-M40 (10.84 mb)
Anleitung Zusammenfassung
Register the page as a trusted site as this automatically enables JavaScript settings. If the content block dialog box does not appear, follow the procedure below to display the [Trusted Sites] dialog box. 1 Click [Tools] > [Internet Options] from the Internet Explorer menu to display the [Internet Options] dialog box. 2 Click the [Security] tab. 3 Click and select [Trusted Sites], and then click [Sites]. The [Trusted Sites] dialog box appears. This completes the trusted site registration process. Notes on Use with Windows Server 2008 • Registering “about:internet” and the Camera Host Name Admin Viewer and Admin Tools will not start when IE ESC (Internet Explorer Enhanced Security Configuration) is enabled in Windows Server 2008. Before using the tools, register “about:internet” and the host name for the connected camera in the Internet Explorer “local intranet” and “trusted sites” lists. Important When “about:internet” is registered, the security level in Windows 7 is the same as when using Internet Explorer. After using the Admin Viewer/Admin Tools, it is recommended that you remove “about:internet” and the camera name as necessary and restore the original security level. 1-9 • .. In Windows Server 2008, the sound function is disabled by default. To receive audio with the VB-M40 Viewer, follow the procedure below to enable the sound function. 1 Open [Control Panel] and click [Hardware and Sound]. Note If [Control Panel] is in the classic view, double-click [Sound]. 2 Click [Sound]. 3 When the [Audio service has not been executed] message appears, click [Yes]. 4 The [Sound] dialog box appears. Click the [Playback] tab to confirm that an audio device has been installed (If no audio device is installed, refer to your PC manual). Notes on Use with Windows Vista/ Windows 7 The following restrictions apply when using the camera with Windows Vista or Windows 7. • RM-Lite For more important information on the RM-Lite operating environment, see the “Administrator's Manual.” Chapter 2 Initial Settings . Preparing the Camera for Use . Initial Setting Tool Installation . Initial Settings Preparing the Camera for Use This section explains how to perform initial settings for the camera and outlines the basic preparation process. For more on specific steps, refer to the corresponding page. Performing Initial Settings for the Camera Before installing the camera, read this chapter and use the VB Initial Setting Tool to configure the IP address. “Installing the VB Initial Setting Tool” (P. 2-3) “Performing Initial Settings for the Camera” (P. 2-4) Check images When initial settings are complete, access the camera via a web browser and check the image using the VB Viewer. “Checking the Camera Image” (P. 2-5) Configuring the Camera from the Setting Page The setting page lets you configure basic camera settings, network operations, user registration, and access restrictions. Configure the necessary settings. “Chapter 4 Setting Page” Using Admin Tools Admin Tools let you leverage many convenient functions and intelligent functions. Configure the tools to help you use the camera more effectively. “Chapter 5 Admin Tools” Using VB-M40 Viewer The camera's built-in VB-M40 Viewer features an Admin Viewer for administrators and a VB Viewer for guest users. Use the VB viewer to check distribution to guest users and the Admin Viewer to check all operations. “Chapter 6 Admin Viewer/VB Viewer” Operating If an error message appears or the camera fails to operate correctly, see the error message and log message information in “Chapter 7 Appendix.” Log messages can be viewed in “Maintenance” (P. 4-33) in the setting page or the Admin Tools “Log Viewer” (P. 5-3). “Chapter 7 Appendix” Important Before starting operations, make sure that the setting page and Admin Tools settings are functioning correctly. Installing the VB Initial Setting Tool 2 Install the VB Initial Setting Tool to perform initial settings for the camera. 1 Insert the bundled Setup CD-ROM into the PC's CDROM drive and follow the procedure below. (1)After confirming that all other applications have been closed, click [Start] menu > [Computer]. (2)Double-click the CD-ROM icon that appears > Applications folder > VBInitInstall.exe. 2 Click [Next] and follow the on-screen instructions to install. Initial Settings When installation is complete, an icon will appear on the desktop. 2-3 Performing Initial Settings for the Camera Use the VB Initial Setting Tool to configure the camera network. 1 Connect the camera and PC to the network and turn on the camera (“Connecting the Camera” in “Installation Guide”). 2 Launch the VB Initial Setting Tool. To launch the VB Initial Setting Tool, double-click the [VB Initial Setting Tool v5.0.1] icon on the desktop or select [Start] menu > [All Programs] > [WebView Livescope] > [VB Initial Setting Tool v5.0.1]. The Tool will automatically detect the camera connected to the network and display the camera's MAC address, IP address and model name. T...