Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Panasonic Dateigröße: 21.67 mb Dateiname: Unterrichtssprache:

Operation and configuration when connectingthe recorders in cascading connection When connecting the recorders (up to 5 recorders) in cascading connection, all images managed by the connected recorders can be monitored on a single monitor. The following are descriptions of how to operate when the recorders are connected in cascading connection. To operate the recorders connected in cascading connection, it is necessary to configure the settings in advance. Refer to the Installation Guide for further information. Important: • Audio cables can also be connected in cascading connection. Configuration Configure the settings required for cascading connection. Operations and settings of the WJ-HD716K are the same as that of the WJ-HD616K. For WJ-HD616K Select "On" for "Cascade" on the "Cascade" tab under "Display" of the setup menu of the recorder to be connected in cascading connection. Set the unit addresses of recorders as follows. WJ-HD616K Unit address (system) Unit address (controller) First recorder 001 Select a number except 001 - 004 and not used Second recorder 002 for the other devices. Third recorder 003 Fourth recorder 004 Fifth recorder 005 Settings of a system controller Set the unit addresses of system controllers as follows. System controller Unit address Remarks First system controller 001 It is possible to operate all monitor 1 and monitor 2 connected to the first through fifth WJ-HD616K. Second system controller 002 Monitor 1 and monitor 2 connected to the first Third system controller Fourth system controller 003 004 through the fifth WJ-HD616K are available to operate. However, camera selection on monitor 2 is unavailable. 63 Example of video output (analog) connection Operation using the buttons on the front panel It is possible to operate using the buttons on the front panel. When selecting monitor 2, images will be displayed on monitor 2 connected to the first WJ-HD616K. When selecting monitor 1, images will be displayed on monitor 1 connected to the WJ-HD616K currently being operated. Only the WJ-HD616K currently being operated is subject to operation. It is impossible to operate the other WJ-HD616K using the buttons on another WJ-HD616K. Operate using the system controller • When using the system controller whose unit address is 001 It is possible to operate all the WJ-HD616K/WJ-HD716K in cascading connection by designating the unit number from a PS·Data compatible system controller. Refer to the operating instructions of the system controller for how to control it in the PS·Data mode. • When using the system controller whose unit address is 002 - 004 It is possible to operate all the WJ-HD616K/WJ-HD716K using the PS·Data compatible system controller. However, camera selection on monitor 2 is unavailable. Monitor 2 Monitor 1 Monitor 1 Monitor 1 Monitor 1 PS·Data compatible system controller (Unit address: 002) Unit address (system): 001 First recorder Unit address (system): 002 Second recorder Unit address (system): 003 Third recorder Unit address (system): 004 Fourth recorder * Do not assign unit address numbers (controller) 001 - 004 and also numbers used for the other devices to each the WJ-HD616K. (Unit address: 003) (Unit address: 00) 1 2 3 4 5 6 7 8 9 0/10 11 12 13 14 15 16 Digital Disc Recorder WJ-HD616 MOUSE 1 2 3 4 5 6 7 8 9 0/10 11 12 13 14 15 16 Digital Disc Recorder WJ-HD616 MOUSE 1 2 3 4 5 6 7 8 9 0/10 11 12 13 14 15 16 Digital Disc Recorder WJ-HD616 MOUSE 1 2 3 4 5 6 7 8 9 0/10 11 12 13 14 15 16 Digital Disc Recorder WJ-HD616 MOUSE (Unit address: 001) Operate the camera It is possible to operate the following camera operations when displaying live images from a camera with the panning/tilting and zooming function. • Panning/Tilting Adjust the horizontal/vertical position of images from the camera • Zoom Zoom in/out images from the camera • Focus Adjust the focus of the camera • Iris Adjust the lens iris of the camera • Preset position function Register preset positions and move the camera direction to the registered preset positio. • Auto function Activate the auto function of the camera according to the settings of the camera Note: • The camera operation can be performed only when displaying images on a 1-screen on monitor 1. • Depending on the model of the camera, some operations may not work. • When a user with a higher user priority is operating at the same time, it may be impossible to operate the camera. In this case, the indication "BUSY" will be displayed on the operation panel. Refer to the Installation Guide for further information about the priority. • Refer to page 70 for how to display the setup page of the camera and configure the settings of the camera. Display the camera control panel The panning/tilting, zooming, focus adjustment and iris adjustment can be made on the camera control panel. Step 1 > The [Pan/Tilt] tab of the camera control panel will Press the [SUB MENU] button on the front panel. be displayed. > The submenu window will be displayed. Step 2...

Herunterladen

Geben Sie zwei Ziffern: