Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
page 39) to validate "Access permission". Step 2 Select days of a week by checking the respective checkboxes. Step 3 Click [C] to select the start time and the end time of the schedule. When not designating time, check the checkbox of "24h". Step 4 Click the [Set] button after completing the settings. > The result will be displayed at the bottom of the window. Note: • The schedules displayed at the bottom of the window can be identified by colors assigned to each schedule. Step 1 Select an action to be assigned to the schedule from "Schedule mode". "Off" is selected at the default. Off: No action will be taken for the respective schedule. VMD permission: The video motion detection (VMD) function will be active during the period of the schedule. Access permission: Users whose access level is set to 2 and 3 on the [User authentication] tab (. page 38) can access the camera only in the period of schedule. 52 5252 Maintenance of the camera [Maintenance] System log check, firmware upgrade, and initialization of the setup menu can be performed on this page. The "Maintenance" page has 3 tabs; the [System log] tab, the [Upgrade] tab and the [Default reset] tab. Check the system log [System log] Up to 100 system logs can be saved on the built-in memory of the camera. When the saved system logs have reached the maximum number, the newer logs will overwrite the older system logs. In this case, the oldest log is the first to be overwritten. When the power of the camera is turned off, logs will be deleted. [No.] The serial number of the system log will be displayed. [Time & date] Time and date at the error occurrence will be displayed. Note: • When "Off" is selected for "Time display format" on the [Basic] tab (. page 17), time & date of logs will be displayed in 24-hour format. [Error description] The descriptions about the error will be displayed. Refer to page 57 for further information about the system logs. 53 Upgrade the firmware [Upgrade] Click the [Upgrade] tab of the "Maintenance" page. (. Pages 13 and 14: How to display/operate the setup menu) The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further information about the firmware upgrade. [Model no.], [MAC address], [Serial no.], [Firmware version], [IPL version], [HTML version], [IP address (IPv6)], [Viewer software installation counter] Information of each item will be displayed. Step 1 Contact the dealer and download the latest firmware onto a PC. Important: • A blank (space) cannot be used for the name of the directory where the downloaded firmware to be saved. Step 2 Click the [Browse...] button and designate the downloaded firmware. Step 3 Click the radio button respective to the desired option to determine whether or not to initialize the settings after completing the firmware upgrade. Note: • Note that the settings cannot be restored after an initialization is operated. Step 4 Click the [Execute] button. > The confirmation window will be displayed. When "Do not reset the settings to the default after the upgrade." is selected, the confirmation window will not be displayed. Important: • After completing the upgrade, delete temporary internet files. (. Page 61) • Upgrade the firmware using a PC in the same sub- net as the unit. • Follow the instructions from the dealer when upgrading the firmware. • Use the designated file (extension: img) for the firmware upgrade. • Use the designated file, sp105_xxxx.img, for the firmware upgrade. * ("xxxxx" indicates the version of the firmware.) • Do not turn off the power of the camera during the upgrade process. • Do not perform any operation during upgrading and wait until it completes. • The following network settings will not be reset when upgrading the firmware after selecting "Reset the settings to the default after completing the upgrade. (Except the network settings)". On/Off for DHCP, IP address, subnet mask, default gateway, HTTP port, line speed, bandwidth control (bit rate), time & date • The viewer software used on each PC should be licensed individually. Refer to your dealer for the software licensing. 54 5454 Reset the settings/Reboot the camera [Default reset] Click the [Default reset] tab of the "Maintenance" page. (. Pages 13 and 14: How to display/operate the setup menu) The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed on this page. [Reset to the default(Except the network settings)] Click the [Execute] button to reset the settings to the default. Note that the network settings will not be reset. It is impossible to operate the camera for around 2 minutes after the initialization. [Load the default HTML files(setup menu).] Click the [Execute] button to reset the HTML files to the default. It is impossible to operate the camera for around 2 minutes after the initialization. [Reset to the default and load the default HTML files.] Click the [Execute] button to reset the settings of the ...