Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Panasonic, modell WVCP240EX

Hersteller: Panasonic
Dateigröße: 115.9 kb
Dateiname: WVCP240EX.PDF

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Otherwise, blooming or smear may when cleaning the camera body. be caused. Use a dry cloth to clean the camera when it is CONNECTIONS SPECIFICATIONS dirty. 7. Do not operate the camera beyond its A. WV-CP240EX (120 V AC 60 Hz) Mounting the Lens Pick-up Device: 768 (H) x 494 (V) pixels, Interline Transfer CCD In case the dirt is hard to remove, use a mild specified temperature, humidity or power Scanning Area: 4.92 (H) x 3.70 (V) mm (Equivalent to scanning area of 1/3" Connect the power cord to an electrical outlet Caution: pick-up tube) detergent and wipe gently. Afterwards, wipe source ratings. of 120 V AC 60 Hz. Before you mount the lens, loosen the screw off the remained part of the detergent in it Use the camera under conditions where tem- Synchronization: Internal, Line-locked or Multiplexed vertical drive (VD2), Color CCTV Camera on the side of the camera, and rotate the selectable with a dry cloth. perature is between –10 °C - +50 °C {14 °F B. WV-CP242EX (12 V DC) flange-back adjusting ring clockwise until it Scanning System: 2 : 1 interlace Connect the power cord to the DC 12 V IN stops. If the ring is not at the end, the inner 122 °F}, and humidity is below 90 %. Scanning: 525 lines / 60 fields / 30 frames 5. Clean the CCD faceplate with care. The input power source is 120 V AC 60 Hz for Operating Instructions terminal on the rear panel of the WV-lens or CCD image sensor may be damaged. Do not clean the CCD with strong or abrasive WV-CP240EX, 12 V DC for WV-CP242EX, and Horizontal: 15.734 kHz CP242EX. q Mount the lens by turning it clockwise on the Vertical: 59.94 Hz lens mount of the camera. detergents. Use lens tissue or a cotton tipped 24 V AC 60 Hz for WV-CP244EX. Horizontal Resolution: 480 TV lines w Connect the lens cable to the ALC Lens applicator and ethanol. Caution: To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for the DC 12 V or AC 24 V Input Terminal. Video Output: 1.0 V[P-P] NTSC composite 75 . / BNC connector Model Nos.WV-CP240EX Connector on the side of the camera. Signal-to-Noise Ratio: 50 dB (Equivalent to AGC Off, weight On) Do not aim the camera at bright objects. 6. Never face the camera towards the sun. MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS @! Electronic Light Control: Equivalent to continuous variable shutter speed between 1/60 s WV-CP242EX and 1/15 000 s aim it at the sun or other extremely bright Whether the camera is in use or not, never Minimum Illumination: 1.5 lx {0.15 foot-candle} at F1.4 GND AC 24V IN 1 2 VIDEO OUT VIDEO OUT VIDEO OUT DC 12V IN LL INT ELC ALC SOFT SHARP OFF BLC ON DC VIDEO ELC ALC SOFT SHARP OFF BLC ON DC VIDEO LL INT ELC ALC OFF SOFT SHARP DC VIDEO BLC ON LL INT ELC ALC OFF SOFT SHARP DC VIDEO BLC ON ELC ALC OFF SOFT SHARP BLC ON DC VIDEO LOCK Fixing ScrewsCamera Mounting Screw Holes Mount Adapter cs c Focus Fixing Screw w q cs c 1.1 lx {0.11 foot-candle} at F1.2 WV-CP244EX Detail: SHARP or SOFT, selectable Lens Mount: C-mount or CS-mount, selectable Ambient Operating Temperature: .10 °C - +50 °C {14 °F - 122 °F} Before attempting to connect or operate this product, 12 V DC (10.5 V - 16 V) Ambient Operating Humidity: Less than 90 % please read these instructions carefully and save this manual for future use. Power Source and WV-CP240EX: 120 V AC 60 Hz, 3.6 W Resistance of copper wire [at 20 °C {68 °F}] Power Consumption: WV-CP242EX: 12 V DC, 270 mA WV-CP244EX: 24 V AC 60 Hz, 3.3 W Ns1005-0 3TR004221AAA Printed in China Dimensions (without lens): 67 mm (W) x 65 mm (H) x 123 mm (D) {2-5/8" (W) x 2-9/16" (H) x 4-13/16" (D)} Weights (without lens): WV-CP240EX: 0.48 kg {1.06 lbs} WV-CP242EX: 0.3 kg {0.66 lbs} CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The serial number of this product may be found on the surface of the unit. You should note the serial number of this unit in the space provided and retain this instruction as a per- manent record of your purchase to aid identification in the event of theft. Model No. Serial No. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manu- al, may cause harmful interference to radio com- munications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. ...