Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
Single Connection A. Without VCR ALARM/SEQ ALARM/SPOT i i i Fmmmm 31 ^ 5 i i s.T “ «" ft * § yjm&Zte (ol ® 2. Parallel Connection C. Without VCR ALARM/SEQ ALARM/SPOT B. With VCR ALARM/SEQ D. With VCR ALARM/SPOT ALARM/SEQ -7- 3-3. Timing Selection (TIMING SELECT) 3-7, Automatic Reset On/Off Setting (AUTO RESET) ** SET UP MEND ** CAMERA ID AUDIO SELECT TIMING SELECT SEQ TIME ADJ ALARM BUZZER ALARM TIME ADJ AUTO RESET BRIGHT COMP END SET UP 12 3 4 L CAMERA SEQ XHTJ 1 SEC ON 60 SEC ON 12 3 4 DISABLE ** SET UP MENU ** CAMERA ID AUDIO SELECT TIMING SELECT SEQ TIME ADJ ALARM BUZZER ALARM TIME ADJ AUTO RESET BRIGHT COMP END SET UP 12 3 4 L CAMERA SEQ INT 1 SEC ON 60 SEC fON] 12 3 4 DISABLE The video / audio switching timing can be selected n , ,K,-r,. . . 1V Selects the Automatic Reset On/Off mode, from INT (internal) or EXT (external). 3-4. Sequential Time Adjustment (SEQ TIME ADJ) ** SET UP MENU CAMERA ID AUDIO SELECT TIMING SELECT SEQ TIME ADJ ALARM BUZZER ALARM TIME ADJ AUTO RESET BRIGHT COMP END SET UP 12 3 4 L CAMERA SEQ INT |1'_'SEC| ON 60 SEC ON 12 3 4 DISABLE 3-8. Bright Compensation Setting (BRIGHT COMP) The bright adjustment can be made at each channel. ** SET UP MENU ** CAMERA ID AUDIO SELECT TIMING SELECT SEQ TIME ADJ ALARM BUZZER ALARM TIME ADJ AUTO RESET BRIGHT COMP END SET UP 12 3 4 1 CAMERA SEQ INT 1 SEC ON 60 SEC ON [Il.2-.3r4l DISABLE The sequential time of the camera picture can be selected. 3-5. Alarm Sound On/Off Setting (ALARM BUZZER) »* SET UP MENU ** CAMERA ID AUDIO SELECT TIMING SELECT SEQ TIME ADJ ALARM BUZZER ALARM TIME ADJ AUTO RESET BRIGHT COMP END SET UP 12 3 4 L CAMERA SEQ INT 1 SEC Ton] 60 SEC ON 12 3 4 DISABLE Alarm Buzzer On/Off mode can be selected in the Alarm ON mode. 3-6. Alarm Time Adjustment (ALARM TIME ADJ) ** SET UP MENU ** CAMERA ID AUDIO SELECT TIMING SELECT SEQ TIME ADJ ALARM BUZZER ALARM TIME ADJ AUTO RESET BRIGHT COMP END SET UP 12 3 4 L CAMERA SEQ INT 1 SEC ON _ ■60.SEC_j ON 12 3 4 DISABLE Selects the interval time of alarm signals at 1 to 60 seconds. -8- SETUP OPERATION Editing Set Up menu Before entering the Set Up menu, remember the ALL RESET operation in order to escape from the confusion as follows. (1) Confirm that the Mode Selection Switch is set to the ON position, the Input Selection Switch is set to the CAMERA position and Set Up menu is not displayed. (2) Turn off the power of this monitor. (3) Turn on the power of this monitor while pressing the Set Up Switch and Right Switch simultaneously. All adjustments and selections are reset to the factory setup condition. ** SET UP MENU ** CAMERA ID 12 3 4 1 CAMERA AUDIO SELECT SEQ TIMING SELECT INT SEQ TIME ADJ 1 SEC ALARM BUZZER ON ALARM TIME ADJ 60 SEC AUTO RESET ON BRIGHT COMP 1 . . 4 END ■* SET UP DISABLE: Entering Setup Menu Press the Set Up Switch. [* SET UP MENU CAMERA ID 12 3 4 1 CAMERA AUDIO SELECT SEQ TIMING SELECT INT SEQ TIME ADJ 1 SEC ALARM BUZZER ON ALARM TIME ADJ 60 SEC AUTO RESET ON BRIGHT COMP 12 3 4 END SET UP DISABLE Blinking Press the Camera Selection Switches which is connected with the camera. By pressing the Set Up Switch for more 2 seconds, the “SET UP” menu is displayed on the monitor screen as shown below. By observing this menu, you can check the present condition. Refer to the following sections for details of each item. After confirming the present condition and further resetting of each item is not required, move the cursor to the “END” position on the left bottom line and press the Set Up Switch to return to the normal camera picture mode. important notice When the “SET UP DISABLE” is displayed on the bottom line of the Set up menu, you can not enter the actual mode setting. This prevents mis-opera-tion' of the mode setting. ** SET UP MENU ** CAMERA ID AUDIO SELECT TIMING SELECT SEQ TIME ADJ ALARM BUZZER ALARM TIME ADJ AUTO RESET BRIGHT COMP END SET UP 12 3 4 CAMERA SEQ INT 1 SEC ON 60 SEC ON 1 . . 4 IENABLE * To enable the set up menu editing (resetting / readjustment), move the cursor to the bottom line by using the Up Switch and Down Switch and move to the “SET UP DISABLE” position by using the Right Switch or Left Switch and press the Set Up Switch. “SET UP ENABLE” is displayed. Move the cursor to the desired item to be reset for readjust through the “END” position. Important Notice : When the cursor is moved to the next position (next item) after changing the data (ex. ON - OFF), the latest data is written on the memory (Electronic Erasable) and Programmable Read Only Memory (EEPROM) and it remains until the further data write is made even if the camera power is switched off. Setting Procedure 1. Camera Identification Setting (CAMERA ID) >• SET UP MENU •* CAMERA ID 111 2 3 4 1 CAMERA AUDIO SELECT SEQ TIMING SELECT INT SEQ TIME ADJ 1 SEC ALARM BUZZER ON ALARM TIME ADJ 60 SEC AUTO RESET ON BRIGHT COMP 12 3 4 END SET UP DISABLE Press the Down Switch (T). ♦ ** SET...