Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Blinks when an operator attempts to control a monitor (or camera) that is already used by a higher-priority @1 Link indicator (LINK) operator or the operator has done the prohibited opera- Lights up when communication is established with the tion. matrix switcher. @8 Joystick @2 Alarm indicator (ALARM) Use this joystick to manually operate cameras, camera Lights up when an alarm condition exists. site accessories and a recorder, or to move the cursor in SETUP MENU on the active monitor screen. @3 Monitor indicator (MONITOR) UP: Up Lights up when the monitor number appears on the DOWN: Down LED display. L: Left, rewind*, backward field advance* R: Right, fast-forward*, forward field advance* @4 LED Display *Available after pressing the RECORDER button while Displays the monitor number, camera number, numeric connecting to a recorder. entry and error status, etc. @9 Iris buttons (IRIS CLOSE/OPEN) @5 Camera indicator (CAMERA) Close or open the lens iris of cameras equipped with Lights up when the camera number appears on the the specified lens. LED display. Press the CLOSE and OPEN buttons simultaneously. The lens iris is reset to the factory default setting. @6 Busy indicator (BUSY) Lights up when the higher-priority operator selects the camera or monitor you are currently operating. Operations from the system controller are disabled until this indicator goes off. #0 Focus buttons (FOCUS NEAR/FAR) Adjust the lens focus of cameras equipped with the specified lens. Press the NEAR and FAR buttons simultaneously. The lens focus is adjusted automatically, if the specified auto focus camera is equipped. #1 Zoom buttons (ZOOM WIDE/TELE) Press these buttons to zoom the lenses equipped with the specified cameras. Press the WIDE and TELE buttons simultaneously during the recorder mode. The recording is started. #2 Call Preset button (CALL PRESET/PROGRAM PRESET) To call the selected camera's preset position, press this button in combination with the numeric buttons. (The specified cameras support this function.) To program a preset position, press the corresponding numeric button(s), and then press this button while holding down the SHIFT button. #3 Auto Pan button (AUTO PAN/CAM FUNC) Activates the auto panning function of cameras equipped with this feature. To execute camera functions, press this button in combination with the numeric buttons.(The specified cameras support this function.) #4 Clear button (CLEAR/LOG OUT) Use this button to clear numeric input on the LED display, or exit from the ALARM HISTORY table (p. 117), the VIDEO LOSS HISTORY table (p. 117), or the SYSTEM STATUS table (p. 116). To logout of the system, press this button while holding down the SHIFT button. #5 Camera (Set) button [CAM (SET)/WIPER] CAM: To select a camera, press the corresponding numeric button, followed by this button. SET: To enter numeric input, such as operator ID and password, press this button in combination with the numeric buttons. Also use this button to execute the currently highlighted selection and go into a submenu of SETUP MENU. WIPER: To turn on the housing wiper of the camera, press this button while holding down the SHIFT button. #6 Numeric buttons Press these buttons to enter numbers into the system such as the camera and monitor number, sequence number, preset position, etc. • In combination with the OSD button, parameter selection in OSD (On-screen Display) operation of the monitor status or research in a history table become available. • In combination with the SHIFT button, AUX and Defroster are available. • In the recorder mode, electronic zooming and multi- screen sequence, etc. are available when pressed in combination with the SHIFT button. #7 Monitor (Escape) button [MON (ESC)/MON LOCK] MON: Press this button to select a monitor. To select a monitor, press the corresponding numeric buttons, followed by the MON (ESC) button. ESC: Press this button to escape from the currently highlighted selection and return to the previous page of SETUP MENU. MON LOCK: To prevent other operators from controlling the monitor, press this button while holding down the SHIFT button. To release the lock, press this button while holding down the SHIFT button again. (Refer to p. 106.) #8 Alarm Reset button (RESET/ALL RESET) RESET: To reset an alarm activated in the currently active monitor, press this RESET button. ALL RESET: To cancel all activated alarms at a time, press this button while holding down the SHIFT button. #9 Alarm Acknowledge button (ACK/SUSPEND) ACK: Acknowledges an activated alarm. To select the alarm monitor, press the ALARM button. To select the desired alarm action number, press the numeric buttons, then press this ACK button. "ACK" will appear on the monitor. To reset the alarm, press the RESET button after acknowledging the alarm. "ACK" will go out. SUSPEND: To suspend an activated alarm, press this button while holding down the SHIFT button. "ALM SUSPENDED" will appear on the monitor. To cancel the suspensi...