Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Doorphone Card Supports 4 doorphones and 4 door openers. The doorphone is an option (KX-T30865). Contents Location of the Card . . . . . . . . . . . . . . . . . . . . .3 Installation for the Card . . . . . . . . . . . . . . . . . .5 Doorphone Card . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Location of the Card The location of the optional card is shown below. Precaution: To protect the printed circuit boards (Pboards) from static electricity, do not touch parts on the P-boards in the main unit and on the optional cards. KX-TD816 Doorphone Card Connector Doorphone Card Front cover is open. 3 KX-TD1232 DOORPHONE Card Connector Doorphone Doorphone Card Front cover is open. 4 Installation for the Card 1. Set the power switch on the main unit to the OFF position and disconnect the power cord from the AC outlet. Panasonic D816DIGITAL SUPER HYBRID SYSTEM Disconnect Disconnect from from AC outlet AC outlet Power Switch Power Switch 5 2. Loosen the two screws on the right side of the main unit and open the front cover in the direction of arrow A . D1232DIGITAL SUPER HYBRID SYSTEM Panasonic A Panasonic D816DIGITAL SUPER HYBRID SYSTEM A screw screw screw screw Note • The two screws are attached to the front cover with springs so that they will not be lost. 3. To install the Doorphone Card, see page 7. 4. Close the front cover and screw. 5. Connect the power cord to the AC outlet and then set the Power Switch on the main unit to ON position. 6 Doorphone Card Before installing the Doorphone Card to the main unit, install the Doorphone (KX-T30865). For details about the doorphone, refer to the Installation Manual. 1. Connect two 4-conductor modular connectors to the Doorphone Card Cabinet, and pass the cords through the grooves in the cabinet. 2. Attach the Doorphone Card Cabinet to the main unit and press down. 7 3. Connect the cord to the Doorphone Card Connector. KX-TD1232 KX-TD816 To Terminal Box Installation 8 Wiring of the Doorphone 1. Connect the Doorphone Card to the terminal box using two 4-conductor modular connectors. 2. Connect the wires of doorphone 1 to the red and green screws of the terminal box. 3. Connect the wires of doorphone 2 to the yellow and black screws of the terminal box. 4. Connect the wires of doorphone 3 to the red and green screws of the terminal box. 5. Connect the wires of doorphone 4 to the yellow and black screws of the terminal box. 9 KX-TD816 4-conductor wiring is required. Doorphone 3 (KX-T30865) Doorphone 4 (KX-T30865) Yellow Red Black Green Terminal Box Panasonic Panasonic 4-conductor wiring is required. Doorphone 1 (KX-T30865) Doorphone 2 (KX-T30865) Yellow Red Black Green Terminal Box Panasonic Panasonic View of Doorphone Connector Jack Doorphone 1 Doorphone 3 Doorphone 2 Doorphone 4 10 KX-TD1232 Note • NB Colors shown on the above diagram indicate the internal cable connections of the Terminal Box. 4-conductor wiring is required. Doorphone 3 (KX-T30865) Doorphone 4 (KX-T30865) Yellow Red Black Green Terminal Box Panasonic Panasonic 4-conductor wiring is required. Doorphone 1 (KX-T30865) Doorphone 2 (KX-T30865) Yellow Red Black Green Terminal Box Panasonic Panasonic View of Doorphone Connector Jack Doorphone 1 Doorphone 3 Doorphone 2 Doorphone 4 11 Connecting Door Openers 1. Loosen the screw to remove the cover. 2. Loosen the screws on the terminal strip. 12 3. Insert the wires coming from the door openers into holes and tighten the screws. Pass all the wires through the Holder. To door opener 3 To door opener 4 To door opener 2 Holder To door opener 1 Note • Set the door opener paired with the doorphone. • For wiring, UL 1015, AWG 22 twisted wire or the equivalent is recommended. • The wire should be between 1.2 mm and 2.4 mm (3/64 inch and 3/32 inch) in diameter including the coating. D=1.2 mm-2.4 mm (3/64 inch-3/32 inch) 13 14 15 Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanteria, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Copyright: This manual is copyrighted by Kyushu Matsushita Electric Co., Ltd. (KME). Under the applicable copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written consent of KME and its licensee. © 2001 Kyushu Matsushita Electric Co., Ltd. All Rights Reserved. Printed in the United Kingdom PSQX2631ZA KA0901HK0 ...