Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: Honeywell Dateigröße: 1.43 mb Dateiname: Unterrichtssprache:

DURATION In LATCHED mode, this is the time that the alarm output remains active after it has been triggered. TYPE Select from HIGH (0V to +5V when activated) or LOW (+5V to 0V when activated). HDD EVENT Determines whether a hard drive event triggers the alarm output. 3. Configure the following action settings: ALARM Configure whether the alarm inputs trigger the alarm output. VIDEO LOSS Configure whether video loss on any of the selected channels triggers the alarm output. MOTION Configure whether motion detection on any of the selected channel triggers the alarm output. Note Remember to select APPLY and click to save all settings before exiting these menus. Configuring Buzzer Out Settings 1. Click BUZZER OUT on the left side of the EVENT/SENSOR window. The BUZZER OUT setup menu appears. HREP Color Digital Video Recorder User Guide Figure 2-54 BUZZER OUT Setup Menu These settings determine the behavior and actions that will trigger the internal buzzer. 2. Configure the following behavior settings: OPERATION Enable/disable the internal buzzer. HDD EVENT Determines whether a hard drive event triggers the buzzer. MODE Select from TRANSPARENT (the buzzer sounds only when the trigger criteria are present) or LATCHED (the buzzer sounds for a set period of time after a trigger). DURATION In LATCHED mode, this is the time that the alarm output remains active after it has been triggered. 3. Configure the action settings: ALARM Configure whether the alarm inputs trigger the buzzer. VIDEO LOSS Configure whether video loss on any of the selected channels triggers the buzzer. MOTION Configure whether motion detection on any of the selected channel triggers the buzzer. Note Remember to select APPLY and click to save all settings before exiting these menus. Configuring E-Mail Notification 1. Click E-MAIL NOTIFICATION on the left side of the EVENT/SENSOR window. The E-MAIL NOTIFICATION setup menu appears. Document 800-06847 Rev B 61 08/10 Installation Figure 2-55 E-MAIL NOTIFICATION Setup Menu These settings determine the behaviors and actions that will send an e-mail to a remote user. 2. Configure the behavior settings: NOTIFICATION Turn ON/OFF e-mail notification. SETUP CHANGE Configure whether a setup change triggers an e-mail notification. HDD EVENT Configure whether a hard drive event triggers an e-mail notification. BOOTING EVENT Configure whether a booting event triggers an e-mail notification. 3. Configure the action settings: ALARM Configure whether alarm inputs trigger an e-mail notification. VIDEO LOSS Configure whether video loss on any of the selected channels triggers an e-mail notification. MOTION Configure whether motion detection on any of the selected channels triggers an e-mail notification. FREQUENCY E-mail sending period (Maximum 60 minutes). Note E-mail settings must also be configured in the Modifying User Details on page 52 and Configuring E-Mail Notification on page 61. HREP Color Digital Video Recorder User Guide Configuring Disk Management Settings Select DISK MANAGEMENT in the Main system setup window, then click . The DISK MANAGEMENT setup window opens. Figure 2-56 DISK MANAGEMENT Setup Window Highlight DISK MANAGEMENT, then press to manage the internal hard drives. RECORD TIME LIMIT In certain circumstances, it might be necessary to limit the amount of footage stored on the DVR (to comply with data protection laws for example). Recording can be limited to 12 hours, 1 day, 2 days, 3 days, 1 week, or one month. When the DVR has this amount of footage stored, it will start to overwrite the earliest recorded footage. OVERWRITE When ON, the DVR starts overwriting the earliest recorded footage once the hard drive becomes full. In this case, the percentage of hard drive used shown in live display will always be 99%. When set to OFF, the DVR continues recording from that time until the hard disk capacity is full. The DVR will Overwrite all video that was recorded before the time that Overwrite was set to OFF, and then the DVR will stop recording. FORMAT If necessary, use this option to erase all footage from the DVR. Note When a RECORD TIME LIMIT is set, the OVERWRITE option cannot be changed. Document 800-06847 Rev B 63 08/10 Installation RECORD SETUP Click MENU on the control panel. The SETUP window appears. Figure 2-57 SETUP Window Click RECORD SETUP in the SETUP window. The RECORDING window appears. Figure 2-58 RECORDING Setup Window Configuring the Recording Behavior of your DVR Use the to configure the settings on the RECORDING OPERATION window. See Figure 2-58. SCHEDULE MODE Select either DAILY (one schedule applies to every day of the week) or WEEKLY (each day of the week has its own schedule). PRE EVENT RECORDING TIME When the DVR is not in continuous recording mode, this setting determines the amount of time that is always recorded before an event (motion detection, alarm input, for example) occurs. POST EVEN RECORDING TIME When the DVR is not in continuous recording mode, this setting deter...

Herunterladen

Geben Sie zwei Ziffern: