Login:
Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Anleitung Elmo, modell EDR-X109

Hersteller: Elmo
Dateigröße: 3.67 mb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


ELMO Manufacturing Corp. is a registered trademark of ELMO Company LTD. This manual will guide you through the usage of ELMO DVR Server and ELMO DVR Remote software. If you have any questions or concerns, please visit our website at or contact our technical support team. Limited Warranty ELMO warrants this product to be in compliance with its own plans and specifications, and to be free from defects in materials and workmanship under normal use and service for all parts, excluding the Hard Drives, for a period (or the equivalent) of three (3) years after the original purchase date. During this period, ELMO will replace parts at no charge; however, labor costs will be charged after one (1) year. Hard Drive: Parts + Labor = 1 year warranty Other Parts: Parts + Labor = 1st year only* Parts: 2nd and 3rd year only * N.B.: Compact (CP) units are warranted for only one (1) year, parts and labor. This warranty excludes costs for initial technical adjustments (setup) which are the responsibility of the dealer from whom you purchased the unit. It also excludes damages due to misuse or neglect. Damages resulting from electrostatic discharge (ESD) will not be warranted. This warranty does not cover damages beyond ELMO's control. In no event shall ELMO be liable for any direct, indirect or consequential damages, loss of anticipated profits, loss of time or any other losses incurred by the buyer in connection with the purchase, installation, operation or failure of this product. We, ELMO and its agents, are not responsible for viruses. Users should install anti-virus software on their DVR at their own risk. For more details on the limitations of this warranty, contact your distributor. **For technical assistance, please call: 1-800-947-3566 To obtain service, please follow these steps: 1. Arrange for delivery of your equipment to: ELMO, 1478 Old Country Road, Plainview, New York, 11803, USA. 2. All shipments should be shipped prepaid, insured and properly packaged (preferably in the original packaging) and accompanied by a letter outlining the defect. 3. Supply your warranty registration, bill of sale, or other evidence of purchase date. NOTE: The ELMO DVR must be used with an Uninterruptible Power Supply (rated at a minimum of 500 watts), with range protection. Failure to do so will void all warranties! General This product is the product of ELMO's advanced technology and has passed extensive reliability and compatibility tests. Copyright of this manual belongs to ELMO, and may not be reprinted or reproduced without prior written permission. If you need to modify or repair your system, we recommend that you contact a certified ELMO Dealer/Installer. Otherwise, the system warranty will be voided. Should you have any problems or questions with our product, contact your local ELMO Dealer/Installer. This product is certified for domestic and industrial use: CE certified for Europe, and FCC certified for the USA. Precautions 3 Precautions Please avoid these conditions when selecting a location for your system: - Excessive heat, such as direct sunlight or heating appliances - Moisture, dust, and smoke - Magnetic fields or electrical waves - Below freezing temperatures - Obstruction to system ventilation hole Before installing this system, please ensure that: - The power is switched off - There is enough room for the system and its connecting cables - The system is placed on an even surface - The system is not placed near any electronic equipment. (For example, a microwave, radio, or any type of wireless equipment such as a telephone or cell phone) Unpacking To unpack your DVR, follow these steps: 1. Place the box on a flat, clean surface. 2. Remove the box by pulling and lifting the system up with both hands. 3. Place the system down carefully. 4. Read the User Manual thoroughly before installing your system. 5. Make sure all the parts listed below have been included: Main ELMO DVR Server and Remote Software ELMO DVR manual Electrical cord for AC Windows 2000™/ WindowsXP Keys Telephone cord Keyboard ELMO DVR control cable Mouse Table 1. Required Items 4 - ELMO USER MANUAL 2003G Figure 1. Required Items ELMO DVR Back View 5 ELMO DVR Back View The following diagram displays the back of your DVR: Figure 2. ELMO DVR Rear View 6 - ELMO USER MANUAL 2003G Connecting the Serial Cable The following functions will not work if the cable is not connected: - Sensor Function - Control Function - Pan/Tilt Function - External Monitor Output Figure 3. Serial Cable Warning ELMO DVR SERVER 7 ELMO DVR SERVER Starting your ELMO DVR Server The installation process configures Windows to automatically start your DVR on start up. Alternatively, you can start the server by double-clicking on the ELMO Server icon on your desktop. With Windows 2000™ and Windows XP™, you can also use our virtual keyboard to enter information. Simply click on the keyboard icon located o...

Dieses Handbuch ist für folgende Modelle:
Überwachungstechnik - EDR-X416 (3.67 mb)
Überwachungstechnik - EDR-X216 (3.67 mb)
Überwachungstechnik - EDR-X116 (3.67 mb)
Überwachungstechnik - EDR-X04 (3.67 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien