Login:
Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Anleitung GoVideo, modell R6530

Hersteller: GoVideo
Dateigröße: 1018.72 kb
Dateiname: govideo_r6530_quickstart.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Choose Spanish menus. Choose French menus. Press to continue. Please wait... 9 channels found Channel 021 found Channel searching done! To exit press the ENTER key. Welcome! Please set the time and date: 8:48 PM 01 / 01 / 00 TUE Continue... Please select signal type: Antenna Cable Skip Power R6530 DVD+R/RW RECORDER DVD+R/RW • DVD-R/RW • CD • MP3 • WMA • PICTURE CD PLAYBACK Power Play/Pause Open/Close Stop Input Channel S-Video Video Audio L R Record Record Line In 1 Op en/Close 1 2 Open/Close 3 Disc/Live (Live Mode) (Set Channel) (Set Quality) 4 Input 5 Quality 6 Record 7 Power R6530 DVD+R/RW RECORDER DVD+R/RW • DVD-R/RW • CD • MP3 • WMA • PICTURE CD PLAYBACK Power Open/Close Play/Pause Stop Channel Input S-Video Video L Audio R Record Record Line In 1 Open/Close 1 2 Open/Close 3 4 Enter Play UNPACK YOUR DVD RECORDER • R6530 DVD recorder (1) • Remote control (1) • 1.5V AAA alkaline batteries (2) • Audio/video cable (1) • RF (Antenna) cable (1) • User’s guide (1) • Quick reference guide (1) • Warranty registration card (1) • DVD+RW disc (1) INSERT REMOTE CONTROL BATTERIES 1 Remove battery cover on back of remote control. 2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+/-). 3 Replace cover. CONNECT DVD RECORDER 1 Connect the RF cable from your antenna or cable TV jack to the ANTENNA IN jack on the back panel of the DVD Recorder. 2 Connect the supplied audio/video cable from the AUDIO/VIDEO OUT jacks on the back panel of the DVD Recorder to the line in jacks on your television and/or stereo receiver. 3 Plug the DVD Recorder into a standard electrical outlet and press the Power button on the front panel. 4 Turn on your TV and select the Video input. 5 The Language setup menu will appear. Continue with “Initial Setup” below. For advanced connections, please refer to the User’s Guide. COMPLETE INITIAL SETUP 1 Set the DVD Recorder’s on-screen menu language. • Use the / buttons to select English (default), Spanish, or French. • Press Play /Enter to continue. 2 Set the DVD Recorder’s time and date. This is essential for accurate timer recording: • Use the / buttons to select each item (hours, minutes, month, day, and year). • Use the / buttons to set each item to the correct time and date. • Press Play /Enter to continue. 3 Select Antenna or Cable: • Use the / buttons to select Antenna (default), or Cable. • Press Play /Enter to continue. 4 Run Auto Channel Search • Auto Channel Search runs automatically after you select Antenna or Cable. This may take several minutes. • When all available channels have been found, press Play /Enter to complete Initial Setup. 1 2 3 4 BASIC RECORDING BASIC PLAYBACK 1 Press Open/Close on the remote control or front panel to open the disc tray. 2 Insert a DVD+R or DVD+RW into the disc tray with the label side facing up. 3 Press Open/Close again to close the disc tray. 4 Press Disc/Live on the remote control to switch to Live mode. 5 Press Input on the remote control until the Channel input is selected. Select the desired channel using the Channel +/- or 0-9 buttons. 6 Press Quality to set the record quality to the desired level (see table). 7 Press Record to start recording. • When recording is complete, press Stop . • WAIT appears on the screen for a few moments while the DVD Recorder stops recording and adds the new title to the disc menu. Quality Setting Rec Time/Disc HQ (High Quality) 1 hr. SP (Standard Play) 2 hrs. LP (Long Play) 3 hrs. EP (Extended Play) 4 hrs. SLP (Super Long Play 6 hrs. 1 Press Open/Close on the remote control or front panel to open the disc drawer. 2 Place the disc in the drawer with the label side facing up and playback side facing down. 3 Press Open/Close again to close the disc drawer. 4 Press Play /Enter on the remote control or front panel. • Many discs will load and begin playing automatically when the disc drawer closes. • If the disc is a DVD+R/+RW, the disc menu will appear. Use the / buttons to highlight the desired title and press Play /Enter. • Press Stop to stop playback. Questions? DO NOT RETURN THIS PRODUCT TO THE STORE! Our Award-Winning Customer Service Professionals are Ready to Help! Call Us! 1-800-736-7679 E-Mail Us! Visit Our Web Site! customerservice@govideo.com ...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien