Stimmen - 5, Durchschnittliche Bewertung: 3.6
(
)
)
|
Anleitung Zusammenfassung
3) High reliability Highly reliable due to a combination of hardware quality and an embedded LINUX based operating system. 4) Simple setting and system maintenance Enables simple installation and operation with basic settings and camera inputs. 5) Diverse total security function Enables security system by using alarm inputs, outputs and PTZ camera control. 6) Remote data backup Backup and playback using client application via network. 7) Large storage capacity Storage can be extended through the use of external IEEE 1394 and USB interfaces. 8) Local data backup Back up image using USB memory devices such as USB FDD, USB ZIP Drive. 9) Diverse monitoring function Diverse monitoring is possible such as FULL/PIP/4/6/8/9/13/16/user/ZOOM screen. View live and playback simultaneously while recording. 10) Audio recording playback function Adjustable audio quality and compression for added flexibility. 11) Motion detection and event recording Digital motion detection and event recording with pre and post alarm recording. 12) Search Function Playback quickly via diverse search conditions and event log. 13) Firmware upgrade Allows easy upgrade of product firmware via the Internet or USB port. 14) Various recording resolution Record up to 120FPS NTSC or 100FPS PAL and 7 quality levels. 15) Simultaneous recording and playback True triplex function allows for simultaneous recording and playback locally as well as via the network. 16) Multi password function Allows 5 permission levels to control access and operation. 17) Event Notification function Notification via e-mail to monitor alarms as well as various events and actions. 18) Camera control function Allows PTZ camera control from the built-in front panel keys. 1. 3 Parts name and Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2221 1) DISPLAY Toggles between 1, 4, 9, 16, 6, 8 and 7 split screens. Enter PTZ on-screen menu in PTZ mode. 2) USER Enter user defined screen mode. Use the DISPLAY button to toggle between 4, 9, 6, 7, 10, 13, 8 and PIP screens. Enter detail view while in Recording Schedule. 3) SPOT Enter SPOT mode to allow SPOT monitor control. When enabled the main monitor displays the Spot status indicator. 4) FULL ZOOM Allows 2, 3 or 4 times zooming. Use the directional buttons to move the zoomed area. 5) PANORAMA Playback a single channel on a multi-split screen. Use the DISPLAY and channel buttons to adjust the viewing effect. 6) PIP Picture-in-Picture mode allows to view live and playback screens simultaneously. 7) SEARCH Playback by specific date and time or event. 8) Channels (1~16) Select video channels in live, playback, PTZ and menu modes. Buttons 1~10 are used to enter password digits. 9) USB port Used to connect HDD, CD writers and memory devices. 10) LED Indicators POWER/REC, HDD, LAN, MENU and PTZ indicators. 3 11) MENU Enter menu mode; exit sub-menus. 12) PTZ/ENTER Enter PTZ mode; select or confirm menu selection. 13) STOP Stops playback; reset alarms; hold down to select multiple cells in Recording Schedule. 14) R.PLAY, PLAY, FF, REW R.PLAY: Reverse Playback/Left PLAY: Playback/Right FF: Fast Forward/Up REW: Rewind/Down Used to control Pan/Tilt 15) PAUSE Pause playback. 16) Jog Shuttle/Dial Shuttle: Fast forward or rewind during playback. Dial: Slow forward/reverse playback in pause. JOG DIAL JOG SHUTTLE 17) AUTO Sequences channels in live view mode; enables auto focus in PTZ mode. 18) TOUR Initiate PTZ tour. 19) PRESET Setup PTZ preset positions. 20) ZOOM/COPY Adjust zoom position in PTZ mode; copy image to USB device. 21) FOCUS Adjust focus position in PTZ mode. 22) IRIS Adjust Iris position in PTZ mode. REAR 1 2 4 5 9 108763 11 12 13 14 1) PORT A (RS-422) Used for communicating with external devices in full-duplex RS-422. 2) LAN 10/100 Base-T ethernet connection. 3) PORT B (RS-422/RS-485) Used for communicating with external devices in full-duplex RS-422 or half-duplex RS-485 4) ALARM IN 16 alarm inputs. 5) ALARM OUT 4 alarm outputs. 6) S-VIDEO Monitor output as S-VIDEO signal. 7) IEEE 1394 Connect external IEEE 1394 devices (FireWire) such as HDD and CD-RW. Notice Connect and power IEEE 1394 devices prior to powering DVR. Some devices may not be recognized when both HDD and CD-R/RW devices are present. 8) MONITOR Monitor output as composite signal. 9) SPOT OUT Spot monitor output as composite signal. 10) AUDIO IN/OUT RCA terminals for audio recording and playback. 11) POWER Switch Main power switch. 12) VIDEO INPUT & LOOP OUT (1~16) Connect asynchronous video signal 1.0 Vp-p (75 ohm). Loop out is changed to HI-Z automatically. 13) AC SELECT Select AC115V or 230V. 14) AC INLET Input power voltage. 6 2 Setup and Connections 2. 1 Power Setup Select power (AC 115V/AC 230V) by AC Selector according to input voltage. • If set as figure 1, AC 115V is selected. • If set as figure 2, AC 230V is selected. Figure 1 Figure 2 2. 2 Telemetry Connection Multiple DVRs and keypads may be connected via RS-422 (PORT A). Up to two PTZ serial c...