Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
An Alarm/Starter Combo system will have all of the functions listed below depending on vehicle. Button 0.5 sec 2.5 sec 3.5 sec Locks and Arm Lock then Panic (*8) Unlocks and Disarm Aux 1 Trunk Release (*7) Aux 2 Remote Start On/Off Siren On/Off Option Programming Menu #1 – Installer Only Valet Mode On/Off (*2) Shock Sensor On/Off Drive Lock On/Off (*3) Option Programming Menu #2 – Installer Only Passive Arming On/Off Timer Start On/Off (*4) Turbo Mode On/Off (*5) Query to activate Secure Aux (*1) Some of the button functions above require additional programming by the installer. Here is a list of options that you may want to review before installation. These are features that may not be normally set up at the time of installation. Therefore, there may be an extra charge for these features and installation. Please consult your installer if you would like any of these features. Some of these features require extra installation. You can match the function from the above menu with the option of the below menu by finding the corresponding starred numbers. Example: Valet Mode Function (*2) matches Option 3-10 (*2). Option Number Feature Setting Applicable To Default(I) Optional(II) Optional(III) Optional(IV) Alarm / Starter Starter Alarm 1-3 Driver's priority unlock Off On V V V 1-6 Reservation Lock (Manual transmission) Locks When Reservation Mode is Set Does Not Lock When Reservation is Set Reservation Sets 10 Seconds After the Last Door is Closed V V 1 1-7 (*7) Unlock / Disarm With Trunk Release Unlock, Factory Disarm, and Trunk Release Factory Disarm, Trunk Release Only Trunk Release Only V V V 1-8 Locking while in Passive Arming Passive locking w/ Passive Arming No Passive Locking w/ Passive Arming V V V 1-9 (*3) Ignition controlled door locks Off On RPM Locks (Remote Start Only) V V V 1-10 Auto Relock (If a door is not opened within this amount of time.) Off 30 sec 60 sec 5 min V V V 2-2 (*5) Turbo mode. Off 2 Min 1Min 4 Min V V 2-5 (*4) Cold Start with Thermistor Assembly Off On V V 2-6 (*4) Timer Start, or, Minimum Interval Between Cold Starts 3 Hour (4 minute runtime, double for Diesel) 1.5 Hour(4 minute runtime, double for Diesel) V V 2-7 Remote Start Runtime 15 Min 25 Min 45 Min 3 Min V V 2-8 (*4) Temperature of Cold Starting Off -10° C / 14° F -5° C / 23° F 0° C / 32° F V V 2-9 (*4) Temperature of Hot Starting Off 30° C / 86° F 35° C / 95° F 40° C / 104° F V V 2-11 (*6) Turbo, Remote Start Runtime Extension w/ #1 for 2 seconds No Yes V V 3-1 Parking lights While Remote Started Constant Output Flashing Output Off V V 3-4 Starter-Kill relay. Anti-Grind Anti-Grind + Starter Kill Anti-Grind + Passive Starter Kill V V 3-5 (*8) Anti-Jacking Starter-kill Ignition-Kill (no Anti-Grind) V V 3-6 Factory Alarm Option Off On (Starter Only) V 3-7 Siren Duration (Upon Alarm Trigger) 30 sec 60 sec 120 Sec Chirps for 20 seconds V V 3-8 Horn Output On Double Lock Only On Lock and Unlock On Lock, Unlock, and Start On Double Lock and Start V 3-10 (*2) Valet Key 5 times, or Remote (I+III) while Ignition is On Key 5 times or Remote (I+III) Secure Valet(Default code 3,3) V V V 4-5 (*1) Secure Aux Output (1 and 2 Only) On Off V V V Lock Button (0.5 Sec.) – Tapping this button for a split second will lock/arm your CompuStar system. Your parking lights will flash once when you tap this button. Lock Button (3.5 Sec.) – This button activates the panic mode on your system when held down for 3.5 seconds. Holding down the Lock button for 3.5 seconds will panic the siren. You can turn panic mode off by tapping the Unlock button. This Panic mode will also activate the Anti-Jack mode. The Anti-Jack mode will require additional installation. See Anti-Jacking under Additional Features below. Unlock Button (0.5 Sec.) – Tapping this button for a split second will lock/arm your CompuStar system. Your parking lights will flash twice when you tap this button. Trunk Button (0.5 Sec.) - Tapping the Trunk button activates Aux 1. These can be used to activate side doors, window modules, etc. By default, the Key button can only be activated as Secure Aux to prevent accident activation. Click IV before you activate the Trunk button. This can be changed – ask your installer. You may want to keep Secure Aux if you connect Aux to open side doors. Trunk Button (2.5 Sec.) – When you hold the Trunk button for 2.5 seconds you can release your trunk. By default when you release the trunk the CompuStar will also disarm and unlock the doors. Key Button (0.5 Sec.) - Tapping the Key button activates Aux 2. These can be used to activate side doors, window modules, etc. By default, the Key button can only be activated as Secure Aux to prevent accident activation. Click IV before you activate the Key button. This can be changed – ask your installer. You may want to keep Secure Aux if you connect Aux to open side doors. 2 Key Button (2.5 Sec.) – Holding the Key Button for 2.5 seconds activates the remote start feature on your system. The vehicle will flash the pa...