|
Anleitung Zusammenfassung
To use the VPS/PDC function, set VPS/PDC to ON in step 4 above. You can also use the VPS/PDC function for a source connected to one or more of the LINE inputs. To record a programme from your set top box If you connect a set top box and the VCR, you can record a programme from your set top box. 1 Turn on the set top box. 2 On the set top box, select the programme for which you want to make a timer setting. 3 Follow steps 1 through 6 above. 4 Keep the set top box turned on until the VCR finishes recording the programme for which you have made a timer setting. To use the VCR after setting the timer To use the VCR before a recording begins, just press ?/1. The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR. Recording TV programmes using the VIDEO Plus+ system (not available on SLV-SE610G) You can also do the following tasks while the VCR is recording: • Reset the counter (page 38). • Display tape information on the TV screen (page 40). • Check the timer settings (page 61). • Watch another TV programme (page 41). Tips • To set the programme position, you can also use the PROG +/– or programme number buttons. • To set the programme position with a two digit number, press -(ten’s digit) button followed by the programme number buttons. • To set the line input video source, you can also use the PROG +/– buttons. • To set the tape speed, you can also use the SP/LP button. • When you are recording a programme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the OPTIONS-1 menu (page 77). • To check, change, or cancel the programme setting, press , to choose LIST, then press OK in step 4. For details, see step 3 in “Checking/changing/cancelling timer settings” (page 61). Notes • If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC signals, the VCR will start recording at the set time without using the VPS/PDC function. • The indicator flashes in the display window when you press ?/1 with no tape inserted. • When you set TIMER OPTIONS to STANDARD in the OPTIONS-2 menu, the VIDEO Plus+ menu does not appear on the TV screen. Select VIDEO Plus+ or VARIABLE. • The VPS/PDC function is automatically set to OFF for the timer recording of a programme from your set top box. • The station name may not appear if the VCR does not receive station name information signals. Basic Operations Recording TV programmes using the VIDEO Plus+ system (not available on SLV-SE610G) Recording TV programmes using the timer You can preset a total of eight programmes, including settings made with other timer methods. Before you start… • Check that the VCR clock is set to the correct time and date. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Turn on your TV and set it to the video channel. • Set TIMER OPTIONS to STANDARD or VARIABLE in the OPTIONS-2 menu (see page 77).* • Refer to “Index to parts and controls” for button locations. 1 TIMER OK PLAY Press TIMER. For SLV-SE610G: The TIMER menu appears on the TV screen. For SLV-SE710G, SE710I, and SE810G: • When you set TIMER OPTIONS to VARIABLE: The TIMER METHOD menu appears on the TV screen. Press M/m to select STANDARD, then press OK. • When you set TIMER OPTIONS to STANDARD: The TIMER menu appears on the TV screen. DATE CANCEL SET : : SELECT : CLEAR MENUEXIT : TIMER LIST TIME PROG. TODAY ––– : –– –– : –– – FRI28 . 9 SET : SELECT : OK MENUEXIT : TIMER METHOD STANDARD VIDEO Plus+ DATE TIMER SP / LP LIST TIME TODAY –– : –– –– : –– SP VPS / PDC FRI28 . 9 PROG. –– OFF SELECT : SET : CANCEL : CLEAR EXIT : MENU Recording TV programmes using the timer OK PLAY OK PLAY INPUT SELECT Set the date, start and stop times, programme position or station name*, tape speed, and VPS/PDC function*: 1 Press , to highlight each item in turn. 2 Press M/m to set each item. DATE CANCEL SET : : SELECT : CLEAR MENUEXIT : TIMER SP / LP LIST TIME PROG. TODAY 519 : 0 0 2 0 : 00 3 SP VPS / PDC OFF FRI28 . 9 To correct a setting, press < to return to that setting and reset. • To record the same programme every day or the same day every week, see “Daily/weekly recording” on page 53. • To use the VPS/PDC function*, set VPS/PDC to ON. For details about the VPS/PDC function, see “Timer recording with VPS/ PDC signals” on page 50. • To record from another source connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the “PROG.” position. Basic Operations Press MENU to exit the menu. MENU Press ?/1 to turn off the VCR. The indicator appears in the display window and the VCR stands by for recording. To record from another source, leave the connected equipment switched on. To...
Dieses Handbuch ist für folgende Modelle:Tragbare Kassettenspieler - SLV-SE610G (910.21 kb)
Tragbare Kassettenspieler - SLV-SE710G (910.19 kb)
Tragbare Kassettenspieler - SLV-SE810G (910.19 kb)