Hersteller: Sony
Dateigröße: 584.27 kb
Dateiname:
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Connecting the aerial Getting Started Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow Disconnect the aerial cable from your TV and connect it to on the rear panel of the VCR. Connect of the VCR and the aerial input of your TV using the supplied aerial cable. Connect the mains lead to the mains. Note • When you connect the VCR and your TV only with an aerial cable, you have to tune your TV to the VCR (see page 15). continued Getting Started Step 3 : Connecting the VCR (continued) Additional connections For SLV-ED929MI, ED925PS, ED828ME/SG and ED825PS To a TV that has audio/ video input jacks This additional connection improves picture and sound quality. Connect the TV as shown on the right. LINE OUT LINE IN Audio/video cable (not supplied) For SLV-ED323ME/SG and ED225PS LINE OUT LINE IN Audio/video cable (not supplied) To a stereo system (not available on SLVED323ME/ SG and ED225PS) You can improve sound quality by connecting a stereo system to the LINE OUT AUDIO R/L jacks as shown on the right. Note • To play a tape in stereo, you must connect your VCR either to a TV with audio/ video input jacks or to a stereo system as shown on above right. LINE OUT AUDIO R/L LINE IN Audio cable (not supplied) Getting Started Step 4 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the language for the on-screen display and TV channels automatically. Getting Started Turn on your TV and set it to the video channel. Tune the TV to channel 51 (for SLV-ED929MI, ED925PS, ED825PS and ED225PS) or 32 (for SLV-ED828ME/SG and ED323ME/SG) (the initial RF channel for this VCR). Refer to your TV manual for TV tuning instructions. If the picture does not appear clearly, see “To change the RF channel” on page 17. 2 OK PLAY Connect the mains lead to the mains. The VCR automatically turns on. For SLV-ED929MI, ED925PS, ED825PS and ED225PS The message for the Auto Set Up function appears on the TV screen. For SLV-ED828ME/SG and ED323ME/SG The LANGUAGE SET menu appears on the TV screen. ENGLISH ARABIC Press , to select the desired language, ENGLISH or ARABIC, then press OK. SET SELECT : OK : EXIT : MENU The message for the Auto Set Up function appears. continued Getting Started Step 4 : Setting up the VCR with the Auto Set Up function (continued) Press OK. The SYSTEM SELECT menu appears. For SLV-ED929MI SYSTEM SELECT SYSTEM–B/G SYSTEM–D/K SYSTEM–I SYSTEM–B/B U.S–ANT. U.S–HRC U.S–IRC JAPAN 3 OK PLAY SELECT : EXECUTE: OK END : MENU For SLV-ED925PS, ED828ME/SG, SYSTEM SELECT ED825PS, ED323ME/SG and ED225PS SYSTEM – B/G SYSTEM – D/K SYSTEM – I SELECT : SET : OK EXIT : MENU Press M/m/, to select the appropriate TV system, then press OK. AUTO SET UP PLEASE WAIT The VCR starts searching for all of the receivable channels and presets 40% them (in the appropriate order for your local area). EXIT : MENU If you want to change the order of the channels or disable unwanted programme positions, see “Changing/disabling programme positions” on page 25. After the search is complete, the clock setting menu appears. See “Setting the clock” on page 18. 4 OK PLAY Getting Started To cancel the Auto Set Up function Press MENU. To change the RF channel If the picture does not appear clearly on the TV, change the RF channel on the VCR and TV. Select INSTALLATION from the menu, then press M/m to highlight VCR OUTPUT CH and press ,. Select the RF channel by pressing the M/m buttons. Then, tune the TV to the new RF channel so that a clear picture appears. Tip • If you want to change the language for the on-screen display from the one preset in the Auto Set Up function, see page 21.* Notes • Whenever you operate the Auto Set Up function, some of the settings (timer, etc.) will be reset. If this happens, you have to set them again. • Auto preset starts automatically only when you plug in the mains lead for the first time after you purchase the VCR. • After using the Auto Set Up function, the LANGUAGE SET menu* does not appear automatically when you connect the mains lead again. If you want to use the Auto Set Up function again, press MENU, then press M/m/, to highlight INSTALLATION and press OK. Press M/m to highlight AUTO SET UP, then repeat all procedures from step 3. • Auto preset can be performed by pressing x STOP on the VCR continuously for 5 seconds or more with no tape inserted. * SLV-ED828ME/SG and ED323ME/SG only Getting Started Getting Started Step 5 : Setting the clock You must set the time and date on the VCR to use the timer features properly. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. • Refer to “Index to parts and controls” for button locations. 1 MENU Press MENU, then press M/m/ , to highlight CLOCK SET and press OK. OK PLAY 12 :00 1 /JAN /20 02 TUE SELECT : SET : END : OK EXIT : MENU OK PLAY 2 Press M/m to set the hour. 18 :00 1 /JAN /20 02 TUE SELECT : SET : END : OK...
Dieses Handbuch ist für folgende Modelle:Tragbare Kassettenspieler - SLV-ED225PS (584.29 kb)
Tragbare Kassettenspieler - SLV-ED323ME (584.27 kb)
Tragbare Kassettenspieler - SLV-ED825PS (584.27 kb)
Tragbare Kassettenspieler - SLV-ED828ME (584.27 kb)