Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sony Dateigröße: 1.03 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Tragbare Kassettenspieler - SLV-SE250P (1.09 mb)

Tragbare Kassettenspieler - SLV-SE250P (1.1 mb)

Tragbare Kassettenspieler - SLV-SE250P (1.12 mb)

Tragbare Kassettenspieler - SLV-SE250P (1.06 mb)

A PAY-TV/Canal Plus programme is always recorded scrambled. • Make sure the PAY-TV/Canal Plus Scart cable is plugged securely. • Check that DECODER/LINE3 (or DECODER/LINE2) in the OPTIONS-2 menu is set to DECODER (see page 75). • Check that this channel is set as PAY-TV/Canal Plus in the TUNER menu (see page 37). Additional Information continued Troubleshooting Symptom Remedy A tape cannot be inserted. • Check that a tape isn’t already in the tape compartment. The remote commander • Make sure you are pointing the remote commander at the remote Others does not function. sensor on the VCR. • Replace all the batteries in the remote commander with new ones if they are weak. • Make sure the [TV] / [VIDEO] remote control switch is set correctly. The selected input line connector number does not appear in the display window. • Check that DECODER/LINE3 (or DECODER/LINE2) in the OPTIONS-2 menu is set to LINE3 (or LINE2) (see page 75). The SMARTLINK function does not work. • Check that your TV complies with SMARTLINK, MEGALOGIC, EASYLINK, Q-Link, EURO VIEW LINK, or T-V LINK. • Make sure you use the Scart cable to connect the VCR and your TV. • Make sure the Scart cable is connected securely. The tracking meter does not • The recording condition of the tape is very poor and tracking appear on the TV screen. cannot be adjusted. • The tracking meter does not appear when playing back an NTSC- recorded tape. You cannot control other TVs. • Set your TV’s code number. The code number may change when you replace the batteries of the remote commander. The display window becomes dim. • The display window automatically becomes dim when the VCR is in standby or timer recording mode. The VCR needs to be cleaned. • Clean the cabinet, panel and controls with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzene. Symptoms caused by contaminated video heads • Normal picture • Rough picture • Unclear picture • No picture (or black & white screen appears) initial terminal contamination Troubleshooting Specifications System Channel coverage PAL (B/G) VHF E2 to E12 VHF Italian channel A to H UHF E21 to E69 CATV S01 to S05, S1 to S20 HYPER S21 to S41 RF output signal UHF channels 21 to 69 Aerial out 75-ohm asymmetrical aerial socket Tape speed SP: PAL 23.39 mm/s (recording/playback) NTSC*1 33.35 mm/s (playback only) LP*2:PAL 11.70 mm/s (recording/playback) NTSC 16.67 mm/s (playback only) EP*2:NTSC 11.12 mm/s (playback only) Maximum recording/playback time 10 hrs. in LP mode (with E300 tape) Fast-forward and rewind time Approx. 3 min. (with E180 tape) Inputs and outputs i LINE-1 (TV) 21-pin Video input: pin 20 Audio input: pins 2 and 6 Video output: pin 19 Audio output: pins 1 and 3 DECODER/t LINE-2 IN (SLV-SE250D/P, SX250D, SE450D/P) 21-pin Video input: pin 20 Audio input: pins 2 and 6 DECODER/t LINE-3 IN (SLV-SE300D1/D2, SE480D) 21-pin Video input: pin 20 Audio input: pins 2 and 6 LINE-2 IN (SLV-SE300D1/D2, SE480D) VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (1) Input level: 327 mVrms Input impedance: more than 47 kilohms General Power requirements 220 – 240 V AC, 50 Hz Power consumption 18 W Operating temperature 5° C to 40° C Storage temperature –20° C to 60° C Dimensions Approx. 355 . 96 . 285 mm (w/h/d) including projecting parts and controls Mass Approx. 3.6 kg Supplied accessories Remote commander (1) R6 (size AA) batteries (2) Aerial cable (1) Design and specifications are subject to change without notice. *1 SLV-SE100A1/A2 cannot play NTSC-recorded tapes. *2 not available on SLV-SE100A1/A2 and SE200V1/V2 Additional Information Specifications Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel A ?/1 ON/STANDBY switch (13) B A EJECT button (42) C Tape compartment D Remote sensor (5) E m (rewind) button (42) (61) F H PLAY button (42) (62) G M (fast-forward) button (42) (61) H z REC (record) button (45) (63) (78) I x STOP button (42) (78) *1 SLV-SE300D1/D2, SE450D/P, and SE480D only *2 SLV-SE300D1/D2 and SE480D only J X (pause) button (42) (78) K DIAL TIMER*1 (48) L SYNCHRO REC (Synchronized Recording) button*2 (65) M PROGRAM/TRACKING +/– buttons (16) (62) (72) N AUTO SET UP/ RF (Radio Frequency) CHANNEL button (13) (16) O LINE-2 IN VIDEO/AUDIO jacks*2 (76) Index to parts and controls Display window LP EP SMARTLINKVIDEO VPSSP PDC OPC TV A Timer indicator (50) (55) (59) F SMARTLINK indicator*3 (11) B Tape speed indicators*1 (45) G TV indicator*3 (47) C VIDEO indicator (10) (45) H Tracking indicator (72) D VPS (Video Programme System)/PDC I Time counter/clock/line/programme (Programme Delivery Control) position indicator (42) (45) (78) indicator*2 (55) J Remaining time indicator (45) E OPC (Optimum Picture Control) K Tape/recording indicator (45) indicator (72) *1 LP and EP is not available on SLV-SE100A1/A2 and SE200V1/V2 *2 not available...

Herunterladen

Geben Sie zwei Ziffern: