Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Sony
Dateigröße: 1.13 mb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
2 Select another programme position on the TV. continued Recording TV programmes To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on the same tape again, cover the tab hole with adhesive tape. Safety tab Tips • To select a programme position, you can use the programme number buttons on the remote commander. For two-digit numbers, press the - (ten’s digit) button followed by the programme number buttons. • If you connect additional equipment to a LINE connector or jack, you can select the input signal using the INPUT SELECT or PROG +/– buttons. • The DISPLAY information appears on the TV screen indicating information about the tape, but the information won’t be recorded on the tape. • If you don’t want to watch TV while recording, you can turn off the TV. When using a decoder, make sure to leave it on. Notes • The DISPLAY information does not appear during still (pause) mode or slow-motion playback. • The DISPLAY information will not appear while playing an NTSC-recorded tape. • If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will not be correct. This discrepancy is due to the difference between the counting cycles of the two video systems. • You cannot watch a PAY-TV/Canal Plus programme while recording another PAY-TV/Canal Plus programme.*2 • When you insert a non-standard commercially available tape, the remaining time may not be correct. • The remaining time is intended for rough measurement only. • About 30 seconds after the tape begins playback, the tape remaining time will be displayed. • The station name*1 may not appear if the VCR does not receive station name information signals. *1 not available on SLV-SE600A/E and SX600E *2 not available on SLV-SE600A Recording TV programmes Recording what you are watching on the TV (TV Direct Rec) (not available on SLV-SE600A/E and SX600E) If you use the SMARTLINK connection, you can easily record what you are watching on the TV (other than tapes being played on the VCR). 1 Insert a tape with its safety tab in place. 2 Press z REC while you are watching a TV programme or external source. The VCR automatically turns on, then the TV indicator lights up and the VCR starts recording what you are watching on the TV. Tips • The TV indicator appears in the display window after you press z REC in some situations such as: – when you are watching a source connected to the TV’s line input, or – when the TV tuner preset data for the programme position is different from the data in the VCR tuner preset. • If there is a tape with its safety tab in place in the VCR, the VCR automatically turns on and starts recording what you are watching on the TV when you press z REC. • You can turn the TV Direct Rec function ON and OFF in the OPTIONS-2 menu (see page 79). Notes • You cannot record what you are watching using this method when the VCR is in the following modes; pause, timer standby, tuner preset, Auto Set Up, and recording. • When the TV indicator is lit in the display window, do not turn off the TV nor change the TV programme position. When the TV indicator is not lit, the VCR continues recording the programme even if you change the TV programme position on the TV. Basic Operations Recording TV programmes Recording TV programmes using the Dial Timer (SLV-SE800D1/D2/E and SX800D only) The Dial Timer function allows you to make timer recordings of programmes without turning on your TV. Set the recording timer to record up to eight programmes, including settings made with other timer methods, that will be broadcast within the next month. The recording start time and recording stop time can be set at one minute intervals. DIAL TIMER ?/1 ON/STANDBY x STOP X PROGRAM +/– Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a decoder, turn it on. 1 2 3 4 5 6 7 8 9 0 INPUT SELECT 1 1 Press DIAL TIMER. DIAL TIMER “DATE” and “TODAY” appear alternately in the display window. If the date and time are not set, “DAY” will appear. See step 2 in the following section, “To set the clock” to set the date and time. SP VIDEO OPC SP VIDEO OPC Recording TV programmes using the Dial Timer (SLV-SE800D1/D2/E and SX800D only) Turn DIAL TIMER to set the recording date. DIAL TIMER VIDEOSP OPC Press DIAL TIMER. DIAL TIMER “START” and the current time appear alternately in the display window. SP VIDEO OPC SP VIDEO OPC Turn DIAL TIMER to set the recording start time. DIAL TIMER You can set the recording start time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. SP VIDEO OPC Basic Operations PROGRAM TRACKING Press DIAL TIMER. DIAL TIMER “STOP” and the recording stop time appear alternately in the display window. SP VIDEO OPC SP VIDEO OPC continued Recording TV programmes using the Dial Timer (SLV-SE800D1/D2/E and SX800D only) 6 6 Turn DIAL TIMER to set the recording stop tim...
Dieses Handbuch ist für folgende Modelle:Tragbare Kassettenspieler - SLV-SE600A (1.13 mb)
Tragbare Kassettenspieler - SLV-SE650D (1.13 mb)
Tragbare Kassettenspieler - SLV-SE700D1 (1.13 mb)
Tragbare Kassettenspieler - SLV-SE700D2 (1.13 mb)