Hersteller: Sony
Dateigröße: 2.1 mb
Dateiname:
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
* These buttons may not work with all TVs. Setting up the remote commander Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. To switch to wide mode, see the footnotes below this table for the applicable code numbers. Manufacturer Code number Sony 01*1, 02 Akai 68 Ferguson 52 Grundig 10*1, 11*1 Hitachi 24 JVC 33 Loewe 45 Mivar 09, 70 NEC 66 Nokia 15, 16, 69*3 Manufacturer Code number Panasonic 17*1, 49 Philips 06*1, 07*1, 08*1 Saba 12, 13 Samsung 22, 23 Sanyo 25 Sharp 29 Telefunken 36 Thomson 43*2 Toshiba 38 *1 Press (wide) to switch the wide picture mode on or off. *2 Press (wide), then press 2 +/– to select the wide picture mode you want. *3 Press (wide). The menu appears on the TV screen. Then, press M/m/, to select the wide picture you want and press OK. Tip • When you set your TV’s code number correctly while the TV is turned on, the TV turns off automatically. Notes • If you enter a new code number, the code number previously entered will be erased. • If the TV uses a different remote control system from the one programmed to work with the VCR, you cannot control your TV with the remote commander. • When you replace the batteries of the remote commander, the code number may change. Set the appropriate code number every time you replace the batteries. Getting Setting up the remote commander 15 Step 3 : Connecting the VCR If your TV has a Scart (EURO-AV) connector, see page 17. If your TV does not have a Scart (EURO-AV) connector Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow Disconnect the aerial cable from your 1 TV and connect it to on the rear panel of the VCR. 2 Connect of the VCR and the aerial input of your TV using the supplied aerial cable. Connect the mains lead to the mains. 3 Note • When you connect the VCR and your TV only with an aerial cable, you have to tune your TV to the VCR (see page 20). Connecting the VCR If your TV has a Scart (EURO-AV) connector Mains lead LINE-1 (EURO AV) AERIAL IN Scart (EURO-AV) to mains Aerial cable (supplied) : Signal flow Scart cable (not supplied) Disconnect the aerial cable from your TV and connect it to on the rear panel of the VCR. 2 Connect of the VCR and the aerial input of your TV using the supplied aerial cable. 3 Connect LINE-1 (EURO AV) on the VCR and the Scart (EUROAV) connector on the TV with the optional Scart cable. This connection improves picture and sound quality. Whenever you want to watch the VCR picture, press t TV/VIDEO to display the VIDEO indicator in the display window. 4 Connect the mains lead to the mains. Getting continued Connecting the VCR 17 About the SMARTLINK features (not available on SLV-SE630D/E and SE230D) If the connected TV complies with SMARTLINK, MEGALOGIC*1, EASYLINK*2, Q-Link*3, EURO VIEW LINK*4, or T-V LINK*5, this VCR automatically runs the SMARTLINK function after you complete the steps on the previous page (the indicator appears in the VCR’s display window when you turn on the TV). You can enjoy the following SMARTLINK features. • TV Direct Rec You can easily record what you are watching on the TV when the VCR is turned on. For details, see “Recording what you are watching on the TV (TV Direct Rec) (not available on SLV-SE630D/E and SE230D)” on page 43. • One Touch Play With One Touch Play, you can start playback automatically without turning on the TV. For details, see “Starting playback automatically with one button (One Touch Play) (not available on SLV-SE630D/E and SE230D)” on page 39. • One Touch Menu When the VCR is turned on, you can turn on the TV, set the TV to the video channel, and display the VCR’s on-screen display automatically by pressing MENU on the remote commander. • One Touch Timer When the VCR is turned on, you can turn on the TV, set the TV to the video channel, and display the timer recording menu (the TIMER PROGRAMMING menu or the SHOWVIEW menu) automatically by pressing TIMER on the remote commander. You can set which timer recording menu is displayed using TIMER METHOD in the EASY OPERATION menu (see page 69). • NexTView Download You can easily set the timer by using the NexTView Download function on your TV. Please refer to your TV’s instruction manual. *1 “MEGALOGIC” is a registered trademark of Grundig Corporation. *2 “EASYLINK” is a trademark of Philips Corporation. *3 “Q-Link” is a trademark of Panasonic Corporation. *4 “EURO VIEW LINK” is a trademark of Toshiba Corporation. *5 “T-V LINK” is a trademark of JVC Corporation. Note • Not all TVs respond to the functions above. Connecting the VCR Additional connections To a stereo system (not available on SLVSE630D/ E and SE230D) You can improve sound quality by connecting a stereo system to the AUDIO R/D L/G jacks as shown on the right. : Signal flow To a satellite or digital tuner with Line Through Using the Line Through function, you can watch programmes from a satellite or digital tuner connected to this VCR on...
Dieses Handbuch ist für folgende Modelle:Tragbare Kassettenspieler - SLV-SE230D (2.1 mb)
Tragbare Kassettenspieler - SLV-SE630D (2.1 mb)
Tragbare Kassettenspieler - SLV-SE630E (2.1 mb)
Tragbare Kassettenspieler - SLV-SE730D (2.1 mb)