Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
If the volume decreases, the number of green bars also decreases. Set the TV/CABLE selection to the appropriate position 27 . 1 2 3 Press Direct channel selection buttons (0–9) or CH or to select the channel.4To turn on the unit, press POWER. The Power indicator will light. • Every time you turn on the TV, the unit starts from TV mode. When you use TV after DVD operation, press TV/VCR. TV - VHF/UHF channels CABLE - Cable TV channels TO SELECT ANALOG CHANNELS When the TV/CABLE selection is in the CABLE position, channels can be selected as follows: TO SELECT CABLE TV CHANNELS: 1-9: Press 0 twice, then 1-9 as needed. Example, to select channel 2, press 0 0 2. 10-99: Press 0, then the remaining 2 digits. Example, to select channel 12, press 0 1 2. 100-125: Press the 3 digits in order. Example, to select channel 120, press 1 2 0. TO SELECT DIGITAL CHANNELS Press the first 3 digits, then press the “–/DISPLAY” button, followed by the remaining 3 digits. Example, to select channel 015-001, press 0 1 5 – 0 0 1. Cable TV VHF 2-13 STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-125 (100) (125) 01 (5A) TV VHF 2-13 UHF 14-69 TV operation VOLUME 32 Notes: • If a channel with no broadcast is selected, the sound will automatically be muted. • If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes. • Digital cable channels may be represented by channel numbers that include a “dash” (e.g., 85–002). These digital channel numbers may not match the numbers in the channel line-up provided by your cable company. This is not a malfunction. 25 5V90101A [E]p24-31 25 8/4/06, 5:44 PM TV operation VOL +/– MUTE CH / CH RTN TV operation (Continued) SLEEP TV operation VOL +/– MUTE CH / CH RTN TV operation (Continued) SLEEP ¦ CHANNEL UP/DOWN Press and release CH or . The channel auto- matically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See “To memorize channels” 27 . ¦ CHANNEL RETURN This button allows you to go back to the last channel selected by pressing CH RTN. Press CH RTN again to return to the last channel you were watching. ¦ MUTE Press MUTE to switch off the sound. The unit’s sound will be silenced and “MUTE” will appear briefly on the screen. The sound can be switched back on by pressing this button again or one of VOL +/–. ¦ SLEEP To set the unit to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count down 10 minutes for each press of SLEEP (2h00m, 1h50m,… 0h10m, 0h00m, ). After the sleep time is programmed, the display will appear briefly every 10 minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to “0h00m”. TV operation MUTE SLEEP TIMER 2h00m 26 5V9...
Dieses Handbuch ist für folgende Modelle:DVD-Player - MW26H82 (5.29 mb)