Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
n П ■ I n /_/•/_//_/• I и To stop recording Press ■ STOP. To check the remaining tape length Press DISPLAY. The white bar indicates the approximate length of tape remaining. Remaining tape length Time counter To watch another TV programme while recording 1 If the TV is connected to the VCR using an audio/video cable, set the TV to TV input. If the TV is connected to the VCR using only the aerial cable, skip this step. 2 Select another programme position on the TV. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on a tape again, cover the tab hole with adhesive tape. 24 Basic Operations To record NTSC colour system programmes NTSC colour signals can be recorded on this VCR from the LINE-1 IN, LINE-2 IN and LINE-3 IN (SAT IN) jacks only. To select the line input, press INPUT SELECT or PROG +/- so that “L1”, “L2” or “L3” appears in the display window. For tape speed, select SP or EP in step 4. EP provides recording time three times as long as SP, however, SP produces better picture and sound quality. When playing back, the VCR automatically detects the tape speed. Tips • To select a programme position, you can use the programme number buttons on the remote commander. For two-digit numbers, press the -/— (ten's digit) button followed by the programme number buttons. • You can select a video source from the LINE-1 IN, LINE-2 IN or LINE-3 IN (SAT IN) jacks. Press INPUT SELECT or PROG +/- to display “L1”, “L2” or “L3” in the display window. • The display appears on the TV screen indicating information about the tape, but the information will not be recorded on the tape. • If you do not want to watch TV while recording, you can turn off the TV. Notes • The display does not appear during still (pause) mode or slow-motion playback. • It may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY. • The remaining tape length does not appear while playing or recording in NTSC system. • The VCR marks the tape with an index signal at the point where each recording begins. You can use these index search signals as references to find a specific recording with other Sony VCRs that feature the index search function. Basic Operations 25 Basic Operations Recording TV programmes using the easy timer You can record one programme on the same day (within 24 hours) with the easy timer. If the VCR clock has not been set, you can set the clock before setting the timer recording. Setting the easy timer Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the recording time. • If you want to see the setting on the TV screen, turn on the TV and set it to the video channel. PROGRAM +/- \ S3 I III (OOP) lilt il I Wl T—- 1---- 1 ---- 1-1 1-■ SP/LP (SP/EP) EASY TIMER knob 1 EASY TIMER Press the EASY TIMER knob. The START indicator appears in the display window. If the clock has not been set, “-:—” appears. Go to step 2 in “Setting or changing the easy clock” on page 28. SP START APC oo */ / ■ Ill JJ -C u --t—▼— 2 Set the recording start time by turning the EASY TIMER knob clockwise or counterclockwise to increase or decrease the time by 15 minutes. To increase or decrease the time by one minute, press PROGRAM +/-. SP START APC oo *1 /•//// *1 1 ■ U LI, 3 Press the EASY TIMER knob to confirm the start time setting. The STOP indicator appears. SP STOP APC , , , , OO */ /.//// J l-ULL. EASY TIMER EASY TIMER 26 Basic Operations 4 Set the recording stop time in the same way as in step 2, then press the EASY TIMER knob. A programme number flashes. SP oo _ _ APC _ _ и LJ I V I I \ и * T— Б EASY TIMER SP/ LP Turn the EASY TIMER knob clockwise or counterclockwise to select the programme you want to record. To select the tape speed, press SP/LP (SP/EP). OO LP APC 0 o Jr'j i i 1 i ' V'T I- 6 Press the EASY TIMER knob to confirm the setting. The © indicator appears in [7-7- the display window and the _ VCR stands by for recording. HOP О ■ ~l ~l u •/__I EASY TIMER (SP/EP) EASY TIMER continued_ Basic Operations 27 Basic Operations Recording TV programmes using the easy timer (continued) Setting or changing the easy clock When “-:—” is displayed in the display window, the VCR clock has not been set. You need to set the clock using the easy clock before setting the timer. You can also change the current time using the easy clock. C£J 1 I I E=l 1 (QOS) \ D D DT Hi ml —1 EASY TIMER knob a a ■0 0 0 '0 0 '0 '0 0 '0 O 0 b cp a Programme number buttons EASY TIMER PROG +/- SP/LP (SP/EP) 1 EASY TIMER • When “-:—” is displayed in the display window, press EASY TIMER. • To change the clock setting, press the EASY TIMER knob on the VCR for more than three seconds. The CLOCK indicator and the current clock setting appear in the display window. SP CLOCK oo ...