Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Sony Dateigröße: 715.63 kb Dateiname: 3865150121.pdf Unterrichtssprache:

You do not have to tune your TV to the VCR. Skip “Tuning your TV to the VCR” on page 14. continued Getting Getting Started 11 Step 3 : Connecting the VCR (continued) About the SMARTLINK features If the connected TV complies with SMARTLINK, SMARTLINK MEGALOGIC*1, EASYLINK*2, Q-Link*3, or EURO VIEW LINK*4, you can use the SMARTLINK function after you complete the steps on the previous page (the SMARTLINK indicator appears in the VCR’s display window when you turn on the TV). You can enjoy the following SMARTLINK features. • Preset Download You can download your TV tuner preset data to this VCR and tune the VCR according to that data in Auto Set Up. This greatly simplifies the Auto Set Up procedure. Be careful, not to disconnect the cables or exit the Auto Set Up function during the procedure. See “Setting up the VCR with the Auto Set Up function” on page 16. • TV Direct Rec You can easily record what you are watching on the TV (other than tapes being played on this VCR). For details, see “Recording what you are watching on the TV (TV Direct Rec)” on page 47. • One Touch Play With One Touch Play, you can start playback automatically without turning on the TV. For details, see “Starting playback automatically with one button (One Touch Play)” on page 42. • One Touch Menu You can turn on the VCR and TV, set the TV to the video channel, and display the VCR’s on-screen display automatically by pressing MENU on the remote commander. • One Touch Timer You can turn on the VCR and TV, set the TV to the video channel, and display the timer recording menu (the TIMER METHOD menu, the TIMER menu, or the SHOWVIEW menu) automatically by pressing TIMER on the remote commander. You can set which timer recording menu is displayed using TIMER OPTIONS in the OPTIONS-2 menu (see page 73). • Automatic Power Off You can have the VCR turn off automatically, if the VCR is not used after you turn off the TV. *1 “MEGALOGIC” is a registered trademark of Grundig Corporation. *2 “EASYLINK” is a trademark of Philips Corporation. *3 “Q-Link” is a trademark of Panasonic Corporation. *4 “EURO VIEW LINK” is a trademark of Toshiba Corporation. Note • Not all the TVs respond to the functions above. Getting Started Additional connections To a stereo system (SLV-SE70EN/ SE70EG/SX70EN only) You can improve sound quality by connecting a stereo system to the AUDIO OUT R/L jacks as shown on the right. To a satellite tuner You can watch programmes from the satellite tuner connected to this VCR on the TV even when the VCR is turned off using the Line Through function. When you turn on the satellite tuner, this VCR automatically sends the signal from the satellite tuner to the TV without turning itself on. 1 Connect the satellite tuner to the DECODER/LINE-3 IN connector as shown above. 2 Set DECODER/LINE 3 to LINE 3 in the OPTIONS-2 menu. 3 Set POWER SAVE to OFF in the OPTIONS-2 menu. 4 Turn off the VCR. To watch a satellite programme, turn on the satellite tuner and the TV. Note • You cannot watch satellite programmes on the TV while recording unless you record a satellite programme. LINE IN Audio cable (not supplied) AUDIO OUT R/L LINE OUT EURO-AV cable (not supplied) DECODER/ ELINE-3 IN : Signal flow : Signal flow Getting Getting Started 13 Step 4 Step 4 Tuning your TV to the VCR If you have connected the VCR to your TV using the EURO-AV cable, skip this step. I/u ON/STANDBY PROGRAM +/– RF CHANNEL 1 ON/STANDBY Press I/u ON/STANDBY to turn on the VCR. 2 Press RF CHANNEL on the VCR lightly. The factory-preset RF channel appears in the display window. RF CHANNEL The VCR signal is output through this channel to the TV. 3 Turn on your TV and select a programme position for the VCR picture. This programme position will now be referred to as the video channel. 4 Press RF CHANNEL. RF CHANNEL The TV system appears in the display window. Getting Started PROGRAM Press PROGRAM +/– (repeatedly) to select the appropriate TV system for your area. Select “G” for the B/G TV system, or “K” for the D/K TV system. Tune the TV to the same channel as that shown in the display window so that the picture on the right appears clearly on the TV screen. Refer to your TV manual for tuning instructions. If you select the wrong TV system in step 5, the picture on the right may not appear. Select the appropriate TV system and tune the TV again. If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below. SONY VIDEO CASSETTE RECORDER Press RF CHANNEL. You have now tuned your TV to the VCR. Whenever you want to RF CHANNEL play a tape, set the TV to the video channel. To check to see if the TV tuning is correct Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct. To obtain a clear picture from the VCR If the screen does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After ...

Herunterladen

Geben Sie zwei Ziffern: