Stimmen - 3, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
To check to see if the TV tuning is correct Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct. To obtain a clear picture from the VCR If the picture does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing RF CHANNEL in step 2, press PROGRAM +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears. Note • If you set the wrong TV system, you may have no sound or sound may be distorted. Getting Started Step 5 Step 5 Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the TV channels guided by the sequence indicated on the TV screen. AUTO SET UP AUTO SET UP Hold down AUTO SET UP on the VCR for more than three seconds. The VCR automatically turns on. The ATP (Auto Tuner Preset) function starts searching for all of the receivable channels and presets them in numerical order. When no more receivable channels can be found, presetting stops and “SET UP” disappears from the display wlindow. To cancel the Auto Set Up function Press AUTO SET UP. Tip • The factory preset language for the on-screen display is English. If you want to change the language to Russian, see page 16. Note • Do not cancel the Auto Set Up function during the ATP operations. If you do, repeat the steps above. Getting Getting Started 13 Step 6 Step 6 Setting the clock You must set the time and date on the VCR to be able to use the timer recording features properly. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. 1 2 3 4 5 6 7 8 9 0 MENU OK CURSOR >/./?// 1 • MENU Press MENU, then press CURSOR >/.to select SETTINGS and press OK. SETTINGS OPTIONS TUNER CLOCK LANGUAGE SELECT : SET :OK • CURSOR • OK 2 Press CURSOR >/.to select CLOCK, • CURSOR then press OK. CLOCK 1.1. 1998 TH 0:00 • OK SELECT : SET : END :OK 3 Press CURSOR >/.to set the date. • CURSOR CLOCK 27.1. 1998 TU 0:00 SELECT : SET : END :OK Getting Started Press CURSOR /to flash the month and set the month pressing CURSOR >/.. • CURSOR CLOCK 271.1. 998 TU 0:00 SELECT : SET : END :OK Set the year, hour, and minutes in sequence, pressing CURSOR /to flash the item to be set, and press CURSOR >/ .to select the digits. The day of the week is set automatically. • CURSOR CLOCK 27.11.1998 FR 15:30 SELECT : SET : END :OK 6 Press CURSOR /to start the clock. • CURSOR CLOCK 27.11.1998 FR 15:30 SELECT : SET : END :OK • OK Press OK. Tip • To change the digits during setting, press CURSOR ? to return to the item to be changed, and select the digits pressing CURSOR >/.. Note • The menu disappears automatically if you don’t proceed for more than a few minutes. Getting Getting Started 15 Manual setup — Selecting a language You can change the on-screen display language. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. 1 2 3 4 5 6 7 8 9 0 MENU OK CURSOR >/./?// 1 • MENU Press MENU, then press CURSOR >/.to select SETTINGS and press OK. SETTINGS OPTIONS TUNER CLOCK LANGUAGE SELECT : SET :OK • CURSOR • OK 2 Press CURSOR >/.to select • CURSOR LANGUAGE and press OK. LANGUAGE ENGLISH • OK SELECT : SET :OK 3 • CURSOR Press CURSOR >/./?//to move the dot ( r ) to the desired language, then press OK. • OK Getting Started Manual setup — Presetting channels If some channels could not be preset using the Auto Set Up function, you can preset them manually. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. 1 2 3 4 5 6 7 8 9 0 MENU OK CURSOR >/./?// PROG +/– Getting 1 • MENU Press MENU, then press CURSOR >/.to select SETTINGS and press OK. SETTINGS OPTIONS TUNER CLOCK LANGUAGE SELECT : SET :OK • CURSOR • OK 2 Press CURSOR >/.to select TUNER and • CURSOR press OK. TUNER PROG10 SYSTEM [D / K ] NORMAL / CATV [ NORM] CHANNEL SET [ C21 ] AFT [ON ] FINE TUNING SELECT : SET : • OK Press CURSOR >/./?//to move the • CURSOR cursor (O) to NORMAL/CATV, then select NORM. To preset CATV channels, select CATV. TUNER PROG10 SYSTEM [D / K ] NORMAL / CATV [ NORM] CHANNEL SET [ C21 ] AFT [ON ] FINE TUNING SELECT : SET : continued Getting Started 17 Manual setup –– Presetting channels (continued) 4 Press CURSOR >/.to move the cursor (O) to CHANNEL SET. • CURSOR TUNER PROG10 SYSTEM [D / K ] NORMAL / CATV [ NORM] CHANNEL SET [ C21 ] AFT [ON ] FINE TUNING SELECT : SET : 5 • PROG Press PROG +/– to select the programme position. Selected programme position TUNER PROG 4 NORMAL / CATV CHANNEL SET SYSTEM [ ]C [ NORM] 21 [ ]D / K AFT FINE TUNING [ ON ] SELECT SET : : 6 • CURSOR Press CURSOR ?// repeatedly until the channel you want is displayed. The channels appear in the following order: B/G TV system D/K TV system Channel number Channel Channel number Channel in...