Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To maintain better picture quality, we recommend that you set OPC to ON in the OPTIONS-1 menu (the OPC indicator lights up in the display window). For details, see page 65. OPC playback The OPC function automatically works on all types of tapes, including rental tapes and tapes that were not recorded with OPC. OPC recording Whenever you insert a tape and start recording for the first time, the VCR adjusts to the tape using the OPC function (the OPC indicator flashes rapidly). This adjustment is retained until the tape is ejected. To deactivate the OPC function Set OPC to OFF in the OPTIONS-1 menu. The OPC indicator in the display window turns off. SET : SELECT : OK MENUEXIT : OPTIONS - 1 OPC AUTO LONG PLAY TAPE LENGTH ON OFF E180 RETURN Adjusting the picture Tip • To set tracking to the centre position, press the PROGRAM + and – buttons on the VCR at the same time. Notes • You can adjust the tracking for an NTSC-recorded tape but the tracking meter won’tbe displayed. • With the Auto Long Play function on, the OPC function will work only in SP mode. If the tape speed automatically switches from SP to LP, the OPC function turns off. If, however, the entire programme is recorded in LP mode, the OPC function will work. • There is a delay of about ten seconds before the VCR actually starts recording while the VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the OPC indicator flashes slowly) and press z REC to have the VCR analyse the tape (the OPC indicator flashes rapidly) and return to recording pause. After the OPC indicator stops flashing, press X PAUSE to start recording immediately. If you want to start recording quickly without using the OPC function, first set the VCR to recording pause (the OPC indicator flashes slowly) and press X PAUSE again to start recording. Additional Operations Adjusting the picture Reducing the VCR’s power consumption You can turn off the indicators in the display window when the VCR is off (standby) mode to reduce the VCR’s power consumption. 1 Press MENU, then select OPTIONS, then press OK. 2 Press M/m to highlight OPTIONS-2, then press OK. 3 Press M/m to select POWER SAVE, then press OK. OPTIONS - 2 TIMER OPTIONS POWER SAVE ON TV DIRECT REC OFF RETURN SELECT : CONFRM : EXIT : OK 4 Press M/m to highlight ON, then press OK. 5 Press MENU to return to the original screen. Note • When the VCR stands by for recording, the indicators in the display window remain lit even when POWER SAVE is set to ON. MENU Reducing the VCR’s power consumption Changing menu options 1 Press MENU, then select OPTIONS and press OK. RETURN SET : SELECT : OK MENUEXIT : OPTIONS OPTIONS - 1 OPTIONS - 2 2 Press M/m to highlight OPTIONS-1 or OPTIONS-2, then press OK. SELECT : OPTIONS - 1 OPC AUTO LONG PLAY TAPE LENGTH ON OFF E180 RETURN Additional Operations SELECT : OPTIONS - 2 TIMER OPTIONS POWER SAVE TV DIRECT REC VARIABLE OFF ON RETURN SET : OK SET : MENU OK EXIT : EXIT : 3 Press M/m to select the option, then press OK. 4 Press M/m to change the setting, then press OK. 5 Press MENU to return to the original screen. Menu choices Initial settings are indicated in bold print. OPTIONS-1 MENU Menu option Set this option to OPC • ON to switch on the OPC (Optimum Picture Control) function and improve picture quality. • OFF to switch off OPC. AUTO LONG PLAY • ON to change the timer recording tape speed automatically to the LP mode when the remaining tape length becomes shorter than the recording time. Note that for AUTO LONG PLAY to work correctly, the TAPE LENGTH setting must be accurate. • OFF to keep the set tape speed. TAPE LENGTH • E180 to use an E-180 or shorter type tape. • E195 to use an E-195 type tape. • E240 to use an E-240 type tape. • E300 to use an E-300 type tape. continued Changing menu options OPTIONS-2 Menu option Set this option to TIMER OPTIONS • VARIABLE to display the TIMER METHOD menu for selecting STANDARD or VIDEO Plus+ when pressing the TIMER button. • STANDARD to display the TIMER menu when pressing the TIMER button. • VIDEO Plus+ to display the VIDEO Plus+ menu when pressing the TIMER button. For details, see page 46 and 50. POWER SAVE • ON to turn off the indicators in the display window during standby mode to reduce the VCR’spower consumption to a minimum. • OFF to turn on the indicators in the display window while the VCR is standing by. TV DIRECT REC • ON to activate the TV Direct Rec function. • OFF to deactivate it. Note • When the VCR stands by for recording, the indicators in the display window remain lit even when POWER SAVE is set to ON. Changing menu options Editing with another VCR How to connect to record on this VCR Connect the line outputs of the other VCR to the LINE IN connector or jacks of this VCR. Refer to the examples A and B and choose the connection that best suits your VCR. Example A Your VCR (Recorder) TV Additional Operations i LINE-1 (TV) VMC-2121HG Scart cable (not supplied) Scart (EURO-AV) Other VCR (Player) : Signal flow Exam...