Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
When “OFF’ is selected, the picture is displayed regardless of the signal condition. • The picture cannot always be seen clearly when OFF is selected. Press ACTION twice to return to the normal screen. Warning Beeper Feature When you select BEEPER ON, a short warning will sound each time an invalid entry or incomplete operation is made. 3 Follow steps 1 ~2 in the above section. b Press AT to select “BEEPER,” and then press ► to select “ON” or “OFF.” C Press ACTION twice to exit this screen. ------SET UP VCR---- REPEAT PLAY :ON NOISY CH BLUE BACK:ON TIME STAMP :OFF SELECT SET END A » KEY ► KEY ACTION KEY 21 More you Can Do / cI b a Tape Operation VHS Index Search System Each time you start a recording, an invisible index mark is placed on the tape. When timer recordings are made, program index and program information (see ‘Time Stamp Feature” on page 21) are also included. You can then use these index marks to access or scan your recordings. Models VV2008/VV2018W units are shown here. Direct Access Index Search (For normal and/or timer recordings.) This feature allows you to go directly to the recording you want from anywhere on the tape by entering the appropriate index number. 1 Press INDEX in Playback or Stop mode to display the INDEX screen. • This screen appears only if there are timer recordings on the Program Index list. If this screen does not appear, go to step 3. Press AT to select INDEX SEARCH,” and then press ► to display the INDEX screen. 3 Press a NUMBERED key to select the desired recording. • To calculate the number, see below. UWWiM PROGRAM INDEX SEARCH SELECT:* ▼ KEY SET :► KEY END :INDEX KEY 4 INDEX SEARCH 04 Press REW or FF to start a reverse or forward search. • When the designated location is reached, the Combination VCR goes into Playback mode. To calculate the Index Number Count forward or backward each recording start point, including the recording you want to see, from wherever you are on the tape. Example 1: If you are watching recording 4 and you want to watch recording 2, count the start points to number 2. The total is 3. Enter 3 in step "3" and press REW. 1 2 3 4 5 6 7 Example 2: If you are watching recording 2 and you want to watch recording 6, count the start points to number 6. The total is 4. Enter 4 in step “3" and press FF. NOTE: i indicates start points of each recording. 22 1 Make each entry within 10 seconds, or the Index Search mode will be cancelled. 1 If any of the VHS Index Search System features are initiated extremely close to an index mark, the index mark may not be counted in the search. ' In the Program Index Search mode, this Combination VCR can memorize a total of 8 programs in order of recording. If you memorize more than 8 programs, the first program will be deleted and the new program will be listed. Timer recordings must be recorded back to back in order for them to be placed on the Program Index list. If a timer recording is followed by a function, such as REW or PLAY the data is lost. Models VV2008/VV2018W units are shown here. Program Index Search (For timer recordings only.) This feature allows you to choose a timer recorded program from a Program Index list, and then start a search for that program. • Once e tape is ejected or normal recording is started, all program index data is erased. 1 Press INDEX in Playback or Stop mode to display the INDEX screen. 2 Press AT to select “PROGRAM INDEX SEARCH,” and then press ► to display the PROGRAM INDEX screen. 3 Press AT to select the desired recorded program, and then press ► to start the forward or rewind search. • When the designated program is reached, the Combination VCR automatically goes into Playback mode. INDEX PROGRAM INDEX DATE START CATEGORY CH |t2/28 1Q:00A SPORTS ABCpl 1/ 4 12:30P MOVIE NBC 1/ 4 8:OOP COMEDY CBC 1/ 7 3:00P MUSIC N3C SELECT:A ▼ KEY SET :► KEY END :INDEX KEY -- FF PROGRAM INDEX SEARCH PLAY Index Scan (For normal and/or timer recordings.) This feature allows you to scan (forward or reverse) each recording for 10 seconds in Playback mode. d Press INDEX in Playback or Stop mode to display the INDEX screen. • This screen appears only if there are timer recordings on the Program Index list. If this screen does not appear, go to step c. b Press AT to select “INDEX SEARCH,” and then press ► to display the INDEX screen. C Press REW or FF to begin the scan. • As each index mark is reached, a short playback will be performed after which FF or REW resumes. d Press PLAY to cancel the scan and begin playback. • You may also press STOP to stop the tape. Start here PROGRAM INDEX SEARCH SELECT:a ▼ KEY SET :► KEY END :INDEX KEY Current i Program F~ | STOP & ^-IrewD-»-Press -H ff t Indexed Point Play (for about 10 seconds) — Fast Forward or Rewind m- STOPt 23 More you Can Do / * ~\ Tape Operation (continued) Your Combination VCR is equipped with several time saving features as well as convenien...