Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Anleitung Panasonic, modell PVQM2508

Hersteller: Panasonic
Dateigröße: 1.39 mb
Dateiname: PVQM2508.PDF
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite

Anleitung Zusammenfassung

31, 2089, 11:59PM. Normal TV or Cable channels are automatically selected and placed in memory depending on how your Combination VCR is hooked up. 9 Getting Started On-Screen Displays (OSD) Channel & Function Display Whenever the channel is changed, the channel number will appear for a few seconds on-screen. (Some station names may also appear if Channel Caption is set. See page 20.) When a function button is pressed (PLAY, FF, etc.), the Combination VCR mode will be displayed. • When a recording is started, both REC and the channel number will appear together. Warning and Instruction Displays These displays will alert you of a missed operation or provide further instructions. If no active channels are found for CHANNEL MEMORY... (see page 5.) If you attempt to set or review a Timer Recording or set the On-Timer and the Clock is not set... (see pages 8, 9.) NO CH FOUND PLEASE CHECK ANTENNA CABLE CONNECTION THEN PUSH CH UP KEY AQAI N PLEASE SET CLOCK BEFORE PROGRAMMING Menu Screen 1 Press ACTION to display the MAIN MENU. 2 Press and ACTION to make your selection (see page 8). • To get the most from each feature, please read the Operation Manual before attempting any operation. * ® ITÏÏJ CLOCK Ж SELECT:* ▼ ч ► KEY SET :ACT I ON KEY If you press REC on the remote control or the Combination VCR, and a cassette is inserted with no record tab... (see page 16.) If you press STOP during a Timer Recording... (see page 19.) CHECK CASSETTE RECORD TAB TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 SEC VCR Status & Clock Display Press DISPLAY to display and remove the overlay shown below. Function Current Channel Caption Status Time (See page 20.) Rec Time Remaining (OTR mode only see page 16.) 12:00AM ABC -0:12:34 SP ! \ ‘Tape Speed Tape Counter Blank Tape/ No Video Signal Indication Whenever a blank section of a tape comes up in Play mode, or when the selected channel has no broadcast signal with the “Blue Back ON/OFF Feature” (page 21) set to ON, the TV screen will turn solid blue. If you press PLAY, FF, REW, or REC on the remote control or the Combination VCR without a cassette inserted... (see pages 15,16.) If the Combination VCR is not in Stop mode or a cassette with record tab is not inserted two minutes before a Timer Recording is about to begin... (see pages 18,19.) If head cleaning becomes necessary while playing back a tape... (see page 25.) If you press a function button other than STOP/EJECT or POWER while the Combination VCR is in VCR Lock mode... (See page 21.) NO CASSETTE PLEASE INSERT A CASSETTE VIOEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL ENO:PLAY KEY VCR LOCK ACTIVATED 10 TV Operation \\A Check list before you begin. □ All connections are made (see page 5). 0 Your Combination VCR is plugged in. 1 Press POWER to turn the Combination VCR on. 2 Select a channel using CH AT or the NUMBERED keys. 3 Press VOL^^ to adjust the volume level. 3PLAY/ NITE/ PHONES REPEAT GAME Jack NITE/ GAME RAPID TUNE О © © © © © © © © ©I 100 KEY Using the 100 key When selecting CABLE channels 100 to 125 with the NUMBERED keys, first press the 100 key, and then enter the remaining two digits. For example, for channel 125: Press NUMBERED keys 100-2-5. Rapid Tune Press R-TUNE to display the last channel you were watching. • When selecting channels with CHAT, . the channels must be displayed for at SnnoiS rhtnnJ\ least 4 seconds in order for the Combination VCR to recognize them as a new selection. CH08 CH10 Audio Mute Press MUTE to instantly mute the sound. Press again, to restore the previous sound level. Phones Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack. SELF-DEMO Mode In Power ON condition, hold down PLAY/REPEAT on the Combination VCR, with no tape inserted, for 5 seconds. The demo screen appears. To cancel: Repeat the above operation. The demo screen disappears. NITE/GAME Mode Feature This feature adjusts the color and picture intensity levels so the screen is easier on the eyes when watching a video or TV at night, or when playing video games. Note: This Combination VCR contains no video game software. Press NITE/GAME repeatedly to select the desired mode. • “NITE” or “GAME" is displayed for 4 seconds. • Each press of NITE/GAME will change the mode as shown below right. • NITE mode may be selected when watching TV or playing a tape. GAME mode may only be selected when watching video and playing video games. To Cancel the NITE or GAME mode, press NITE/GAME until the normal screen appears. • The previous color and picture settings will be restored. Normal screen (No display) NITE mode is cancelled when: • the power is turned Off »a power failure occurs GAME mode is cancelled when: • the power is turned Off • play mode is entered • channel is changed • a power failure occurs • input signal is changed 11 Basic TV Operation HI Picture Adju...


Geben Sie zwei Ziffern: