Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Ensure that curtains and any other materials do not obstruct the ventilation condition to prevent risk of electric shock or fire hazard due to overheating. WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, REFER CHANGE OF SWITCH SETTING INSIDE THE UNIT TO QUALIFIED SERVICE PERSONNEL FCC Note: This device complies with Part 15 of the FCC Rules To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense indicates safety information Do not insert fingers or any objects into the video cassette holder Avoid operating or leaving the unit near strong magnetic fields Be especially careful of large audio speakers Avoid operating or storing the unit in an excessively hot, cold, or damp environment as this may result in damage both to the recorder and to the tape Do not spray any cleaner or wax directly on the unit If the unit is not going to be used for a length of time, protect it from dirt and dust Do not leave a cassette in the recorder when not in use Do not block the ventilation slots of the unit Use this unit honzontally and do not place anything on the top panel Cassette tape can be used only for one-side, one direction recording Two-way or two-track recordings cannot be made Cassette tape can be used for either Color or Black & White recording Do not attempt to disassemble the recorder There are no user serviceable parts inside If any liquid spills inside the recorder, have the recorder examined for possible damage Refer any needed servicing to authorized service personnel 2 Contents Controls and Their Functions........................................ 4 Connections.................................................................... 8 Inserting/Ejecting the Cassette..................................... 8 Playback.......................................................................... 9 • Other Playback Functions..........................................10 Manual Recording...........................................................11 Settings Using the On Screen Display..........................12 On Screen Display Messages........................................17 Before Requesting Service............................................17 Usage Precautions..........................................................18 Specifications..................................................................19 3 Controls and Their Functions FRONT O POWER Press to switch the VTR from on to standby mode or vice versa. 0 EJECT Press to eject the cassette tape. 0 STEREO SELECT To select the audio track (STERE01 audio and/or STERE02 audio) on a tape which was recorded in the 12bit audio mode. During playback, each time the button is pressed, the sound changes as follows: —»STERE01-»STERE02->STERE01- STERE02 (MIX) • The audio track cannot be selected during the playback of a tape recorded in the 16bit audio mode. • When INPUT SELECT is set to DV and a 12bit audio mode input signal is being received, the audio track can be selected by STEREO SELECT at any time. AUDIO OUT To select the desired sound mode. When this button is pressed, the audio output mode changes as follows. -> Stereo-»■Left-► Right- The Left(L) and Right(R) Indicators shown which sound mode is selected in the following way. Stereo: Both the L and R Indicators appear. Left: The L Indicator appears. Right: The R Indicator appears. 0 Cassette Compartment Insert the mini DV cassette tape to here. 0 <44(REW) In the stop mode: In the playback mode: In the pause mode: • When pressed once: • When kept depressed: In the rewind mode: In the menu display mode: To rewind the tape. “«” is lighted while the tape is rewinding. To search in the reverse direction for a scene. • Tap (REW) to lock the unit in the search reverse mode. • Keep (REW) depressed to search in the reverse direction. To advance one frame in the backward direction. To advance continuously frame by frame in the reverse direction. To view the video. To move the cursor. ■ (STOP) To stop playback or recording. In the...