|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Fast Z-Buffer Clear.
I
TM
TM
Z Cache optimized for real-time shadow rendering.
Hardware Installation
nstalling MSI Live Update 3
Optimized for performance at high display resolutions, up to and including widescreen HDTV.
TM
Follow the steps below to install the VGA card :
MSI Live Update 3TM is a useful utility for you to upgrade your MSITM mainboard and VGA
AvivoTM Video and Display Engine
card. Thanks to the powerful capacity of this utility, you can conveniently download and
1. Remove the computer case.
New advanced video capabilities, including high fidelity gamma, color correction and scaling.
automatically update the BIOS and the drivers on-line, without spending much time in
2. Locate the PCI Express slot on your mainboard.
searching many Web sites to find the BIOS or drivers you want.
Dual independent display controllers that support true 30-bpp throughout the display pipe.
Warning: Inserting the VGA card into a wrong
- Full symmetry on both heads.
slot (e.g. AGP slot) may damage your card
Installing from the CD-Title
- Each display controller supports display resolutions beyond 2560x1600.
(referto your mainboard manual for more
1. Insert the CD into the CD-ROM drive, and start the Setup program.
Advanced DVI capabilities, including 10-bit, 16-bit HDR output.
Information).
2. Click the Utility tab on the setup screen.
YPrPb component output for direct drive of HDTV displays.
3. Put the card directly over the
slot
PCI Express
TM
TM
Seamless integration of pixel shaders with video in real time.
and press one end of the card into the slot first.
3. Click the MSI Live Update 3 . Follow the on-screen instructions to complete the
Gently but firmly press the other end until it
VIDEOSOAPTM noise removal filtering for captured video.
Installation.
isfully seated in the slot.
MPEG1/2/4 decode and encode acceleration.
TM
- DXVA support.
4. Secure the card with a bracket screw.
Installing from the MSI Web Site
- Hardware motion compensation, iDCT, DCT and color space conversion.
5. Install all other cards and devices and connect
1. Link to MSI's website at
All-format DTV/HDTV decoding.
all the cables, and then install the case.
http://www.msi.com.tw
Adaptive per-pixel de-interlacing and frame rate conversion (temporal filtering).
6. Connect the monitor. Now, you are ready to
2. Select /Download/ VGA on the upper part
install the software on your computer.
of the MSI's homepage to enter
Anti-Aliasing and Anisotropic Filtering
the Download page.
2x/4x/6x
Anti-Aliasing
modes:
3. Select Utility under the selections of VGA
- Sparse multi-sample algorithm with gamma correction, programmable sample patterns,
on the left side of the web page.
and centroid sampling.
4. Find and click MSI Live Update to
- New adaptive anti-aliasing mode.
download the utility.
R
- Temporal anti-aliasing.
Software Installation (for )
Windows
XP/ 2000
5. Unzip the downloaded utility first and then
- Lossless color compression (up to 6:1) at all resolutions, up to and including wide screen
install this utility by clicking on
HDTV.
To install the driver of the VGA card to your computer running WindowsR XP or 2000, please
LiveUpdate.exe.
2x/4x/8x/16x Anisotropic Filtering modes:
follow the steps below:
6. Follow the on-screen instructions to
- Up to 128-tap texture filtering.
complete the installation.
- Adaptive algorithm with performance and quality options.
1. Turn on the computer.
2. Insert the CD into the CD-ROM drive. The Autorun program will start the Setup program,
7. Launch MSI Live Update and to enter the
The page of the MSI Live Update 3
TM
TM
main page of this utility as shown below.
TM
Support CrossFire
and show the setup screen as follows:
Multi-GPU technology ready.
Four modes of operation:
- Alternate frame rendering for maximum performance.
U
TM
TM
sing MSI Live VGA Driver Update
- Supertiling for optimal load-balancing.
- Scissoring for compatibility.
- Super AA for maximum image quality.
Tip : If, on your computer, the
MSITM Live VGA DriverTM Update
Autorun program does not execute
automatically, please 1) enable the
This service enables you to update the latest VGA driver for your VGA card.
CD-ROM drive Auto-detect function
1. To update the MSITM Live VGA DriverTM, click Live VGA DriverTM item on the lef column of
from Control Panel; or 2) find and
the main page.
run the setup.exe file manually from
the CD.
2. This utility will start checking your platform and the information on the VGA card, and
display the information in a list.
3. Click the graph button on the bottom to connect MSI Live Update Series Server. Then, it
will automatically connect the Internet and compare the version of the driver in the
database.
4. It may take several minutes to detect the required drivers. Please wait while proceeding
3. Click nVIDIA VGA Drivers. Follow the on-screen instructions to complete the installation.
detection.
4. After finishing the installation, restart the computer as instructed.
5. Click the InstallShield Wizard button on the right side of the table to download and
update the driver. All actions will proceed automatically.
6. Follow the on-screen instructions to complete the updating procedure.
...