Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Introduction ............................................................................................................... 2 1.1. Features ........................................................................................................................... 2 1.2. Board Layout .................................................................................................................... 2 2. Hardware Installation ................................................................................................ 3 3. Software Installation .................................................................................................. 4 3.1. DirectX Installation ........................................................................................................... 4 3.2. Driver Installation (Windows® XP/2000/ME/98) .............................................................. 4 3.3. V-Tuner Installation .......................................................................................................... 5 3.4. HYDRAVISION Installation .............................................................................................. 5 4. Appendix ................................................................................................................... 6 4.1. BIOS Flash Utility ............................................................................................................. 6 4.2. How to Reflash BIOS in MS-DOS mode .......................................................................... 6 12MD-R925128DE-102 - 1 VGA Monitor Connector (15-pin) RCA DVI-D Connector VGA Monitor Connector (15-pin) RCA DVI-D Connector 1. Introduction English 1.1. Features • Powered by ATi RADEON 9250 Graphics Processing Unit (GPU) • Supports the new AGP 8X and latest DirectX 8.1 • Integrated with 128MB DDR memory • Supports TV-Out and D-Sub connectors • Supports DVI-D connector 1.2. Board Layout OR NTSC / PAL TV AV Output RCA VGA Monitor Connector (15-pin) DVI-D Connector Analog LCD Monitor Analog Monitor VGA Output Digital LCD Monitor DVI Output - 2 2. Hardware Installation Installing your graphics card. Now that you have prepared your computer, you are ready to install your graphics card. 1. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully seated. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. English - 3 English 3. Software Installation 3.1. DirectX Installation Install Microsoft DirectX to enable 3D hardware acceleration support for Windows® 98/ 98SE / Windows® 2000/ Windows® ME or Windows® XP to achieve better 3D performance. Note: For software MPEG support in Windows® 98/ 98SE/ Windows® 2000/ Windows® ME or Windows® XP, you must install DirectX first. Click "Install DirectX 9" item. 3.2. Driver Installation (Windows® XP/2000/ME/98) Insert the driver CD disk into your CD-ROM, and then you can see the AUTORUN window. If it does not show up, please run "D:\setup.exe". (We assume that your CD-ROM drive letter to be D:). Click "Install Display Driver(Radeon 9200 Series)" item. - 4 3.3. V-Tuner Installation V-Tuner lets you monitors the working frequency of the graphic engine and video memory (Core Clock and Memory Clock). English Click "GIGABYTE Utilities" item. Displays core clock status Displays memory clock status Opens Help page Adjust Memory speed Adjust core speed Select choice of skin 3.4. HYDRAVISION Installation HYDRAVISION and the Desktop Manager are activated whenever Windows® starts. Installing HYDRAVISION adds menu options to the ATI Icon. Click on the ATI icon to access the application's features and help, or to unload the HYDRAVISION Desktop Manager. Click "Hydravision Install" item. - 5 English 4. Appendix 4.1. BIOS Flash Utility 1. Please download the newest BIOS Zip file for your graphics card from GIGABYTE website. The file includes a MS-DOS-based BIOS flash utility. Or contact your local dealer for the file. 4.2. How to Reflash BIOS in MS-DOS mode 1. Extract the downloaded Zip file to your hard disk(s) or floppy disk. This procedure assumes drive A. 2. Restart the computer in MS-DOS mode. (For Windows 2000/XP, you need a startup disk to restart the computer in MS-DOS mode.) 3. Change the command prompt to A:\>. 4. To back up the current BIOS, at the A:\> prompt, type BIOS flash utility name] -s [BIOS file name](example: gvf13 -s r925128de.f1) and press Enter. 5. To flash BIOS, at the A:\> prompt, type [BIOS flash utility name] -p [BIOS file name](example: gvf13 -p r925128de.f2) and press Enter. 6. Wait until it's...