Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Bluetooth® connection by NFC NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. By just touching the Audio Base where the “N-mark” is located with an NFC compatible device, the Audio Base is turned on automatically and then paired and connected with the various devices, such as mobile phones. To locate the “N-mark” on the unit, please see “NFC (N-Mark)” on page 7. 1. Start and turn on the NFC function on the device. Keep touching the device on the “N-Mark” of the Audio Base until the device vibrates or a message pops up; the Bluetooth® will be paired automatically. 2. Touch the device to the Audio Base again to disconnect. In order to avoid unintentional disconnection, it is advised that you place your device away from the “N-mark” once connected. The NFC function is built into devices for Android™ 4.1 Jellybean or later. If your device is powered by a previous version than Android™ 4.1 Jellybean, you must download the relevant application from the Google PlayTM store to use the NFC function. The position of the NFC antenna differs on devices. Check the NFC antenna location before connecting. If your device is covered with a thick case, the connection may not succeed. For details, please refer to the user’s manual of your NFC device. Playback via Bluetooth® enabled devices 1. Press the INPUT button on the remote control or using the Audio Base controls to select the Bluetooth® mode. The display shows “BT” when in the Bluetooth® mode. Your pairing device must have the Bluetooth® feature turned on. 2. Once the Audio Base is detected by your Bluetooth® enabled device, select the “ABX3250” on your device. 3. Enter the PIN code if necessary. PIN code : 0000 4. When this unit is successfully paired with your Bluetooth® device, it will display “CONNECTED”. 5. Select the desired music and press the PLAY/PAUSE button on your device. 6. If the connection fails, ‘PAIRING’ will still be displayed. Disconnect Bluetooth® enabled device 1. Press the INPUT button to select Bluetooth® mode until the display on the Audio Base shows “BT”. 2. Select disconnect or unpair menu on paired Bluetooth® enabled device. The Audio Base is now able to pair with another Bluetooth® enabled device. Pairing Audio Base with a Bluetooth® enabled devices manually If you intend to connect another Bluetooth® enabled device, manual pairing is necessary. 1. Press the INPUT button to select Bluetooth® mode until the display on the Audio Base shows “BT”. 2. Press the PAIRING button on the Audio Base. This will disconnect the current Bluetooth® enabled device and then search for the other Bluetooth® enabled device. The Audio Base must disconnect or unpair from a previous paired device in order to properly pair with another Bluetooth® enabled device. The Audio Base can only connected to one Bluetooth® enabled device at a time. Press the PAIRING button on the Audio Base to ...