Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
When the card pops out, grasp it and pull it straight out. 3 Close the Battery / SD™ Card cover. To prevent data corruption, it is recommended that you format the SD™ Card in the camcorder before using. All data will be erased if the SD™ Card is formatted. Make sure all data is copied to your computer or other media before formatting the SD™ Card. NOTE When a memory card is inserted, photos and videos are saved onto the card rather than the built-in memory. Protecting data on an SD™ Card Photos or videos cannot be recorded on an SD™ Card when the card is locked (read only); however, photos and videos can be viewed. Make sure the lock is in the writable position before recording photos and videos as shown below. 24 24 24 Turning the camcorder on and getting started Write-protected Writable position position (Sample Illustration) Protecting data on an SD™ Card Turning the camcorder on and getting started To turn on the camcorder, either: . Flip the LCD touch screen outward to turn on the camcorder automatically. . Or press the Power ( ) button for approximately one second to turn it on. To record video: Press the Video ( ) button to begin recording. Press it again to stop recording. To take a photo: Press the Photo ( ) button halfway down to take a photo. To view stored videos and photos: Touch the screen and press the onscreen icon to switch to Playback mode. Record 3D video . Press the 3D ( ) button to switch between 2D and 3D modes. . You can play back 3D video with this camcorder (same operation as above). NOTE When the camcorder is switched from 2D to 3D, the screen flashes and becomes darker. This is not a malfunction. Turning off the camcorder To turn off the camcorder, either press the Power ( ) button for one second, or place the LCD touch screen back to its original position. NOTE If you close the LCD panel while recording, the camcorder stops recording. Chapter 3 Chapter 3 e Button functions Record Starts or stops video recording. Pause / Resume Pauses or resumes video recording. Photo Captures a photo. Tele (T) / Wide (W) Zooms in or out. Power Powers ON or OFF. 3D Toggles between 3D and 2D modes. Light Turns On / Off the LED light or Digital light. NOTE Touch the LCD touch screen to show the status of the setting. 25 26 26 26 LCD touch screen information LCD touch screen information The indicators shown on the images below may appear on the LCD touch screen when photos and videos are recorded: Onscreen notification icons Onscreen touch function icons (Sample Image) LCD touch screen indicators NOTE To avoid persistence of the image on the screen, please turn off the Digital Light function after you used it in the dark situation. NOTE The light is disabled automatically when battery power is low ( ). Notification icons 1 Battery: Shows the battery charge level. DC power mode (the camcorder is turned on and plugged in the AC charger). 2 00:03:12 Recording time 00:03:12 Pause recording 250 The remaining amount of photos that can be taken at the current resolution settings 321 Current number of photos taken 3 Motion Detection (2D Video Record mode only) Record Mode Record Mode LCD touch screen information 4 Scene Skin Night 5 Manual White Balance Daylight Fluorescent Tungsten 6 Zoom meter: 2D mode:1. ~10. (10. digital zoom) 3D mode:1. ~4. (4. digital zoom) 7 Motion Detection (2D Video Record mode only) Slow Motion (2D Video Record mode only) Time Lapse (2D Video Record mode only) Pre-Record (Video Record mode only) 8 Digital light ON Light ON Light OFF 28 28 28 LCD touch screen information 9 Video Resolution Full HD (1080p 30) HD60 (720p 60) HD30 (720p 30) VGA (480p 30) WQVGA (while the Slow Motion function is active, the video resolution is 432 x 240 [QVGA]) Photo Resolution High–16MP (interpolated) Standard–5MP Low–3MP 10 Video Record mode Backlight On / Off Photo Record mode Self-timer On / Off 11 Displays the menu options 12 Playback mode On 13 Photo mode On 14 Video mode On 15 Displays the deletion options Record Mode Record Mode Video recording Some features may not be used in combination with others. NOTE . Tap on the screen to close the touchable function bars. Tap again to show the bars. . The camcorder does not power off automatically in DC power mode. . In adapter charging mode, you can turn on the camcorder and it will become DC power mode. In DC power mode, the device is charged by less electric current. Video recording Press the Video ( ) button to start recording. A time indicator displays on the LCD touch screen while recording a video. Press the Video button again to stop recording. To pause recording, press the Pause ( ) button. To continue recording, press it again. To take a still photo while recording a video, press the Photo ( ) button. Touch the onscreen Playback ( ) icon to view a recorded video. The resolution settings available are: Video Quality Full HD 1080/30: 1920 x 1080p 30fps HD60 720/60: 1280 x 720p 60fps HD30 720/30: 1280 x 720p 30fps VGA 480/30: 640 x 480p 30fps NOTE...