Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Triangulating Your camcorder is receiving a strong GPS signal, and can acquire location information. . The GPS switch is set to ON in the default setting. Movies and photos will be recorded with location information. When your camcorder cannot acquire the location information, the last acquired location information is recorded. If you do not want to record location information, set the GPS switch to OFF. . Even if the camcorder is turned off, the GPS function is working as long as the GPS switch is set to ON. Make sure that the GPS switch is set to OFF during takeoff and landing of an airplane. . The dots in the lower right of show GPS signal quantity. When fewer than 3 dots are displayed, the GPS signal is not stable enough to triangulate in the current environment. Start recording in the current state or move to an open area where 3 dots are displayed. . When search of satellite signal is unsuccessful after a few minutes of searching, your camcorder quits searching for a satellite signal and displays . If you make your camcorder search satellite again, turn the GPS switch to OFF and ON again, or turn the power of your camcorder off and then on again. . Processing time can be shortened when you load the GPS assist data into the camcorder using the supplied software “PMB.” Install “PMB” on your computer and connect the computer to the internet. Then connect the camcorder to the computer and the GPS assist data will be automatically updated. . The GPS assist data may not function in the following cases: .When the GPS assist data are not updated for about 30 days or more .When the date and time of the camcorder are not correctly set .When the camcorder is moved for a long distance GB 8 Acquiring the current location information Acquiring the current location information Touch ( YOUR LOCATION) on the recording screen. The current location is displayed and marked at the center of the LCD screen. If you touch a certain point on the screen, the map shows the area with that point at the center. Touch (your location) at the bottom left of the LCD screen to move the current location back to the center. To close the map screen Touch . . Notes . The map always displays the north at the top. . Tips . You can change the scale using the zoom lever (W: larger, T: smaller). . Your camcorder acquires the current location information periodically. The displays of the center marker, etc., appear differently according to the status of the current inquiry. . To display the current location on a map, touch the on the screen during triangulation. When triangulation is unsuccessful, the map shows the default setting location or a location acquired previously. . If you hold a certain point, the map keeps scrolling. . You can also display the current location by touching (MENU) . [Show others] . [ YOUR LOCATION] (under [OTHERS] category). Searching for a desired scene by recording location (Map Index) Where movies and photos were recorded is marked on a map. You can select a movie or photo by recording location. . You can use the Map Index only with movies and photos having location information that was recorded with the GPS switch set to ON. . You cannot use the Map Index with photos recorded on memory card. . Press (VIEW IMAGES). The VISUAL INDEX screen appears. . Touch .[ MAP]. Returns to the VISUAL INDEX screen Scale Previous Next Image marker Displays photos . You can change the scale using the zoom lever (W: larger, T: smaller). . The point you touch on the map scrolls to the center automatically. If you hold a certain point, the map keeps scrolling. . will appear at the upper right corner of the thumbnail of the movie or photo without location information. GB 9 Making good camcorder . . . Touch the image marker where you recorded the movies and The image marker turns red. The movies or photos recorded at that location are displayed on the left of the screen. photos to be played back. . Touch the desired movie or photo. Playback starts from the selected scene. . Notes . The map always displays the north at the top. . When you record several movies and photos at the same location, the movie or photo recorded most recently will be displayed on the LCD screen. . You can also display the Map Index by touching (MENU) . [Show others] . [VIEW IMAGES] (under [PLAYBACK] category) .[ MAP]. . You can also search for the thumbnail of the movie or photo you want to play by touching / in step 3. The recording location of the movie or photo will be displayed at the center of the map. Displaying the coordinate information (COORDINATES) During playback, your camcorder can display the coordinates information recorded on movies and photos. [PLAYBACK] category) . [COORDINATES] . . . . Touch (MENU) . [Show others] . [DATA CODE] (under .Latitude .Longitude GB Adjusting the clock and the area automatically (AUTO CLOCK ADJ/ AUTO AREA ADJ) Adjusting the clock and the area automatically (AUTO CLOCK ADJ/ AUTO AREA ADJ) . Touch (MENU) . [Show others] . [...
Dieses Handbuch ist für folgende Modelle:Kameras - HDR-CX300E (2.41 mb)
Kameras - HDR-CX305E (2.41 mb)
Kameras - HDR-CX350E (2.41 mb)
Kameras - HDR-CX350VE (2.41 mb)