Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Sony Dateigröße: 3.09 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  DCR-PC109E

, / – OK To erase a character: Touch . To insert a space: Touch . 2 Touch to move s to select the next character, and enter the character in the same manner. 3 When you have finished entering characters, touch . 4 Touch . z Tips • To erase the label you have created, touch repeatedly to erase the characters, then touch . • To change the label you have created, insert the cassette into your camcorder and go through the procedure from step 1. ALL ERASE You can delete all data such as date, title, and cassette label saved in the Cassette Memory at one time. 1 Touch [YES] twice. To cancel deletion of all data, select [NO]. 2 Touch . Using the Menu The default settings are marked with G. The indicators in parentheses appear when the Using the setting is selected. The settings you can adjust vary depending on the power mode of your (STANDARD SET) camcorder. The screen shows the items you can currently operate. Unavailable items will be menu – REC MODE/MULTIgrayed out. SOUND/AUDIO MIX/USB-CAMERA, etc. You can select the items listed below on the STANDARD SET menu. To select these items, see “Selecting menu items” (p. 62). 0:00:0060min STBY REC MODE STANDARD SET AUD I O MODE LCD/VF SET OK REC MODE GSP ( SP ) Select to record in the SP (Standard Play) mode on a cassette. LP ( LP ) Select to increase the recording time to 1.5 times the SP mode (Long Play). The use of Sony Excellence/Master mini DV cassette is recommended to get the most out of your camcorder. b Notes • You cannot add sound on the tape recorded in the LP mode. • If you record in the LP mode, a mosaic-like noise may appear or sound may be interrupted when you play back the tape on other camcorders or VCRs. • When you mix recordings in the SP mode and in the LP mode on one tape, the playback picture may be distorted or the time code may not be written properly between the scenes. AUDIO MODE G12BIT Select to record in the 12-bit mode (2 stereo sounds). 16BIT ( ) Select to record in the 16-bit mode (1 stereo sound with high quality). VOLUME See page 49, 52 for details. MULTI-SOUND You can select how to play back audio recorded on a tape in stereo mode. GSTEREO Select to play back a stereo tape or dual sound track tape with main and sub sound. Using the Menu 1 Select to play back a stereo tape with the left channel sound or a dual sound track tape with main sound. 2 Select to play back a stereo tape with the right channel sound or a dual sound track tape with sub sound. ,continued Using the Menu b Notes • You can play back a dual sound track cassette on this camcorder. However, you cannot record a dual sound track on this camcorder. • The setting returns to [STEREO] when you disconnect the power source from your camcorder for more than 5 minutes. AUDIO MIX LCD/VF SET You can adjust the audio balance between the originally recorded sound (ST1) and sound added afterwards (ST2) on the tape (p. 106). b Notes • You cannot adjust sound recorded in 16 bit audio mode. • Only the originally recorded sound will be heard when you disconnect the power source from your camcorder for more than 5 minutes. The recorded picture will not be affected by this setting. LCD BRIGHT See page 21 for details. LCD BL LEVEL You can adjust the brightness of the LCD screen’s backlight. GNORMAL Standard brightness. BRIGHT Select to brighten the LCD screen. b Notes • When you connect your camcorder to outside power sources, [BRIGHT] is automatically selected for the setting. • When you select [BRIGHT], battery life is reduced by about 10 percent during recording. LCD COLOR Touch / to adjust the color on the LCD screen. Low intensity High intensity VF B.LIGHT You can adjust the brightness of the viewfinder. GNORMAL Standard brightness. BRIGHT To brighten the viewfinder screen. Using the Menu b Notes • When you connect your camcorder to outside power sources, [BRIGHT] is automatically selected for the setting. • When you select [BRIGHT], battery life is reduced by about 10 percent during recording. A/V c DV OUT You can connect a digital device and an analog device to your camcorder and convert the signal transmitted from the connected devices to the appropriate signal on your camcorder. GOFF Select when not using the Digital convert function. ON ( ) To output analog images and sound in digital format using your camcorder. The analog signal input to the A/V jack of your camcorder will be converted and output from the DV Interface of your camcorder. For details, refer to the “Computer Applications Guide.” You can connect a USB cable (supplied) to your camcorder, and view the picture displayed on the screen of your camcorder on your computer (USB Streaming). For details, refer to the “Computer Applications Guide.” USB-CAMERA USB-PLY/EDT GOFF Select to deactivate the USB Streaming function. USB STREAM Select to activate the USB Streaming function. You can connect a USB cable (supplied) to your camcorder, and view the picture on the tape or “Memory Stick Duo” in your camcorder on your computer....

Herunterladen

Geben Sie zwei Ziffern: