Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
x LCD BRIGHT You can adjust the brightness of the LCD screen. 1Adjust the brightness with / . 2Touch . x LCD BL LEVEL You can adjust the brightness of the LCD screen’s backlight. BNORMAL Standard brightness. BRIGHT Brightens the LCD screen. • When you use the AC Adaptor as the power source, [BRIGHT] is automatically selected for the setting. • When you select [BRIGHT], battery life is slightly reduced during recording. x LCD COLOR You can adjust the color on the LCD screen with / . x VF B.LIGHT You can adjust the brightness of the viewfinder. BNORMAL Standard brightness. BRIGHT Brightens the viewfinder screen. • When you connect your camcorder to AC Adaptor, [BRIGHT] is automatically selected for the setting. • When you select [BRIGHT], battery life is slightly reduced during recording. x VF WIDE DISP You can select how a 16:9 (wide) aspect ratio image appears in the viewfinder. BLETTER BOX Normal setting (standard type of screen) SQUEZE (Squeeze) Expands the image vertically if black bands at the top and bottom in 16:9 (wide) aspect ratio are undesirable. See page 40. You can select data transfer speed used to transfer data to your computer. BAUTO Sends data by switching automatically between the Hi-Speed USB (USB 2.0) and the speed corresponding to USB1.1 (full speed transfer). FULL SPEED Sends data corresponding to USB1.1 (full speed transfer). You can check the information recorded automatically (data code) during playback. BOFF Data code is not displayed. DATE/TIME Displays the date and time of recorded images. CAMERA DATA Displays the camera setting data of recorded images. LCD/VF SET Low intensity High intensity TV TYPE USB SPEED DATA CODE STANDARD SET (continued) 61 Usi n g t h e S e tu p i t em s DATE/TIME 1Date 2Time CAMERA DATA 3SteadyShot off 4Exposure 5White balance 6Gain 7Shutter speed 8Aperture value 9Exposure value • appears for an image recorded using a flash. • The data code is displayed on the TV screen, if you connect your camcorder to a TV. • The indicator toggles through the following sequences as you press DATA CODE on the Remote Commander: DATE/TIME t CAMERA DATA t OFF (no indication). • Depending on the hard disk condition of the camcorder, bars [--:--:--] appear. • The setting returns to [OFF] after you remove the power source for more than five minutes. You can select the number of thumbnails that appear on the VISUAL INDEX screen. Thumbnail Glossary (p.100) BZOOM LINK Change the number of thumbnails (6 or 12) with the zoom lever on your camcorder.* 6IMAGES Displays thumbnails of 6 images. 12IMAGES Displays thumbnails of 12 images. * You can operate with the zoom buttons on the LCD frame or on the Remote Commander. BAUTO Displays the remaining hard disk free space for about eight seconds as described below. – When your camcorder recognizes the free hard disk space, with the POWER switch is set to (Movie) – When you press DISP/BATT INFO to switch the screen display from off to on, with the POWER switch is set to (Movie) – When the available free space of the hard disk remains less than five minutes for movies – When you start recording from the line input (For DCR-SR100E only) ON Always displays the remaining hard disk free space indicator. The default setting is [ON] so that you can use the supplied Remote Commander (p.39). • Set to [OFF] to prevent your camcorder from responding to a command sent by other device’s remote control. • The setting returns to [ON] after you remove the power source for more than five minutes. The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].) DISPLAY 60min 00:00:00 1 1 2006 1:12:34 AWB 60min 00:00:00 Movie 60min 10/10 Still image REMAINING REMOTE CTRL (Remote control) REC LAMP (Recording lamp) Continued , 62 BON A melody sounds when you start/stop recording, or operate the touch panel. OFF Cancels the melody. BLCD PANEL Shows displays such as the counter on the LCD screen and in the viewfinder. V-OUT/PANEL Shows the display also on the TV screen. BNORMAL Scrolls the setup items downwards by touching . OPPOSITE Scrolls the setup items upwards by touching . B5min The camcorder is automatically turned off, when you do not operate your camcorder for more than approximately 5 minutes. NEVER The camcorder is not automatically turned off. • When you connect your camcorder to a wall socket, [A.SHUT OFF] is automatically set to [NEVER]. See page 95. BEEP DISP OUTPUT SETUP ROTATE A.SHUT OFF (Auto shut off) CALIBRATION See page 46 for details on selecting setup items. See page 20. You can adjust a time difference without stopping the clock. Set your local area with v/V when using your camcorder overseas. Refer to “World time difference” on page 91. You can change this setting without stopping the clock. Set to [ON] to move the time forward one hour. You can select the language to be used on the LCD screen. • Your camcorder offers [ENG[SIMP]] (simplified English) for when you cannot find your nat...
Dieses Handbuch ist für folgende Modelle:Kameras - DCR-SR100E (2.79 mb)