Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
To cancel the operation Press STOP 4. • The Photo search will not function correctly if there is a blank section between recorded sections on the tape. Playing back still images in sequence (Photo scan) You can locate still images one after another and display each image for 5 seconds automatically. 1 Slide the POWER switch repeatedly to turn on the PLAY/ EDIT lamp. Recording/ Playback Continued , 31 Remote Commander (Continued) 2 Press SEARCH M. 2 to select [PHOTO SCAN]. 3 Press .(previous)/>(next) 3. To cancel the operation Press STOP 4. • The Photo scan will not function correctly if there is a blank section between recorded sections on the tape. 32 33 Recording/Playback Playing the picture on a TV You can connect your camcorder to the input jack of a TV or a VCR using the A/V connecting cable (1) or the A/V connecting cable with S VIDEO (2). Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation (p. 9). Refer also to the instruction manuals supplied with the devices to be connected. • For DCR-HC35E: Do not insert/eject the cassette while your camcorder is on the Handycam Station. This may cause a malfunction. A/V OUT 2 1 A/V OUT jack (Yellow) (White) (Red) : Signal flow VCRs or TVs DCR-HC23E/HC24E/HC26E: A/V OUT 2 1 A/V OUT jack (Yellow) (White) (Red) : Signal flow VCRs or TVs DCR-HC35E: Continued , Playing the picture on a TV (Continued) A A/V connecting cable (supplied) For DCR-HC35E: The Handycam Station and your camcorder are both equipped with A/V OUT jacks (p. 57). Connect the A/V connecting cable either to the Handycam Station or to your camcorder, depending on your setup. B A/V connecting cable with S VIDEO (optional) When connecting to another device via the S VIDEO jack, by using the A/V connecting cable with an S VIDEO cable, pictures can be reproduced more faithfully than with the supplied A/V cable connection. Connect the white and red plugs (left/right audio) and S VIDEO plug (S VIDEO channel) of an A/V connecting cable. In this case, the yellow (standard video) plug connection is not necessary. S VIDEO connection only will not output audio. • You can display the time code on the TV screen by setting [DISP OUT] to [V-OUT/LCD] (p. 50). • For DCR-HC35E: Do not connect A/V connecting cable to both the Handycam Station and your camcorder at the same time, as image disturbance may occur. When connecting your camcorder to a TV through a VCR Connect your camcorder to the LINE IN input on the VCR. Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.), if the VCR has an input selector. When your TV is monaural (Only one audio input jack) Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left channel) or the red (right channel) plug to the audio input jack of your TV or VCR. If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR) You need the 21-pin adaptor to connect your camcorder to a TV for viewing recorded images. This adaptor is designed for output use only. This output only adaptor is supplied with the DCR-HC35E model with the label on the bottom panel but not with DCR-HC23E/HC24E/ HC26E models. TV/VCR Recording/ Playback 35 Using the Menu Using the menu items Follow the instructions below to use each of the menu items listed after this page. 1 Slide the POWER switch in the direction of the arrow repeatedly to turn on the respective lamp. CAMERA lamp: settings for recording on a tape PLAY/EDIT lamp: settings for viewing/editing 2 Touch the LCD screen to select the menu item. Unavailable items will be grayed out. x To use the operation buttons on PAGE1/PAGE2/PAGE3 during normal operation For details of the button items, see page 38. 1 Touch . 2 Touch the desired page. 3 Touch the desired button. 4 Select the desired setting, then touch •With some settings, you do not have to touch t . (Close). x To use menu items For details of the items, see page 44. 1 2 3 4 MANUAL SET P EFFECT EXEC RET. TAPE SET REC MODE REMAIN EXEC RET. SP LP EXEC RET. TAPE SET REC MODE REMAIN LP EXEC RET. TAPE SET REC MODE REMAIN 1 Touch t [MENU] on [PAGE1]. The menu index screen appears. 2 Select the desired menu. Touch / to select the item, then touch [EXEC]. (The process in step 3 and 4 is the same as that in step 2.) 3 Select the desired item. 4 Customize the item. After finishing the settings, touch (close) to hide the menu screen. Each touch of [ RET.] takes you to the previous screen. x To use menu items during Easy Handycam operation 0:00:00STBY FN 60min 1 Touch . 2 Select the desired menu. Touch [MENU] then select the desired menu. 3 Change your item setting. After finishing the settings, touch (close) to hide the menu screen. Each touch of [ RET.] takes you to the previous screen. •Cancel Easy Handycam operation to use menu items normally. Using the Menu Operation button items Available operation buttons vary depending on the position of the lamp and the display (PAGE). The default settings are marked with B. The indicat...
Dieses Handbuch ist für folgende Modelle:Kameras - DCR-HC23E (2.14 mb)
Kameras - DCR-HC26E (2.14 mb)
Kameras - DCR-HC35E (2.14 mb)