Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Sony, modell DCR-HC38E

Hersteller: Sony
Dateigröße: 1.67 mb
Dateiname:

Unterrichtssprache:en

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten


Dieses Gerät hat auch andere Anweisungen:
Kameras - DCR-HC38E (953.76 kb)

Anleitung Zusammenfassung


• When the white balance has been set with [ONE PUSH], if you change the [SCENE SEL.] settings, or bring your camcorder outdoors from inside the house, or vice versa, you need to redo the [ONE PUSH] procedure to readjust the white balance. BEEP* B ON A beeping sound starts when you start/stop recording, or operate the touch panel. OFF Cancels the beeping sound and shutter sound. CLOCK SET* See page 12. LCD BRT (LCD bright) LCD BRT (LCD bright) You can adjust the brightness of the LCD screen. The recorded picture will not be affected by this operation. Adjust the brightness with / . When the PLAY/EDIT lamp lights up You can use the video operation buttons ( / / / ) on every PAGE. [PAGE1] MENU See page 34. VOL* (Volume) See page 20. END SCH (END SEARCH) See page 22. DISP GUIDE (Display Guide)* See page 73. [PAGE2] DATA CODE* During playback, displays information (data code) recorded automatically at the time of recording. B OFF Data code is not displayed. CAM DATA (below) Displays camera setting data. DATE/TIME Displays the date and time. FN GUIDE 0:00:00:0060min AWB 100 9dB F1. 8 AUTO 123456 ASteadyShot off BExposure CWhite balance DGain EShutter speed FAperture value b Notes • In the [DATE/TIME] data display, the date and time are displayed in the same area. If you record a picture without setting the clock, [-------] and [--:--:--] will appear. • During Easy Handycam operation, you can set [DATE/TIME] only. BEEP* See page 30. CLOCK SET See page 12. [PAGE3] V SPD PLAY (Various speed playback) You can play back in various modes while viewing movies. 1 Touch the following buttons during playback. To change the playback direction* Touch (frame) Continued , 31 Using the Menu Operation button items (Continued) To Touch play back slowly** [ySLOW] To reverse direction: (frame) t [ySLOW] play back 2 times faster (double speed) (double speed) To reverse direction: (frame) t (double speed) play back frame by frameplayback pause. (frame) during To reverse direction: (frame) during frame playback. * Horizontal lines may appear at the top, bottom, or in the center of the screen. This is not a malfunction. **Pictures output from the DV Interface (i.LINK) cannot be played back smoothly in slow mode. 2 Touch [ RET.] t . To return to the normal playback mode, touch (Play/Pause) twice (once from frame playback). b Notes • You will not hear the recorded sound. You may see mosaic-like images of the previously played picture. A DUB CTRL (Audio dubbing) Using the internal stereo microphone (p. 68), you can add sound to a tape already recorded in 12-bit mode (p. 39) without erasing the original sound. b Notes • You cannot record additional audio: – When the tape has been recorded in the 16-bit mode (p. 39). – When the tape has been recorded in the LP mode. – When your camcorder is connected via an i.LINK cable. – When the tape has been recorded in 4CH MIC mode on other camcorders. – On blank sections of the tape. – When the tape has been recorded in a TV color system other than that of your camcorder (p. 57). – When the write-protect tab of the cassette is set to SAVE (p. 58). – On sections recorded in HDV format. • When you add sound, the picture will not be output from the A/V OUT jack. Check the picture on the LCD screen or the viewfinder. • You can only record additional audio over a tape recorded on your camcorder. The sound may deteriorate when you dub audio on a tape recorded on other camcorders (including other DCR-HC37E/HC38E/HC45E camcorders). Recording sound Insert a recorded cassette into your camcorder beforehand. 1 Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp. 2 Touch (Play/Pause) to play back the tape, then touch it again at the point where you want to start recording the sound. 3 Touch t [PAGE3] t [A DUB CTRL] t [AUDIO DUB]. X appears. RET. 0:00:00:0060minAUDIO DUB 0:00:00:0060min A DUB CTRL 4 Touch (Play). Your camcorder starts audio recording via the internal stereo microphone. appears while recording the new sound in stereo 2 (ST2) during the playback of the tape. 5 Touch (Stop) when you want to stop recording. To dub on other scenes, repeat step 2 to select scenes, then touch [AUDIO DUB]. 6 Touch [ RET.] t . To check the recorded sound 1 Play back the tape on which you have recorded audio (p. 20). 2 Touch t [PAGE1] t [MENU]. 3 Select (PLAYER SET) for the DCRHC37E/ HC45E, or (VCR SET) for the DCR-HC38E, then touch / to select [AUDIO MIX], then touch [EXEC]. VCR SET AUDIO MIX ST1 ST2 EXEC RET. 4 Touch / to adjust the balance of the original sound (ST1) and the new sound (ST2), then touch [EXEC]. b Notes • The original sound (ST1) is output at the default setting. Using the Menu REC CTRL (Recording control) (DCR-HC38E) See page 44. LCD BRT (LCD bright) See page 31. 33 Menu items • Available menu items (z) vary depending on which lamp is lit. • During Easy Handycam operation, the following settings are automatically applied (p. 15). CAMERA PLAY/EDIT Easy Handycam MANUAL SET menu (p. 35) P EFFECT...

Dieses Handbuch ist für folgende Modelle:
Kameras - DCR-HC37E (1.67 mb)
Kameras - DCR-HC45E (1.67 mb)
- ()
- ()

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien