Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• You can take a second picture even while an image is displayed by pressing the shutter button again. 19 Taking Pictures (Smart Auto) What if... • What if the color and brightness of the images do not turn out as expected? The scene icon (see Camera User Guide) that appears on the screen may not match the actual scene. If this happens, try shooting in G mode (see Camera User Guide). • What if white and gray frames appear when you point the camera toward a subject? A white frame appears on the face or subject that the camera detected as the main subject, while gray frames appear on other detected faces. The frames will follow the subjects within a certain range. If the subject moves, however, the gray frames will disappear, leaving only the white frame. • What if a frame does not appear on the subject you want to shoot? The subject may not be detected, and frames may appear on the background. If this happens, try shooting in G mode (see Camera User Guide). • What if a blue frame appears when you press the shutter button halfway? A blue frame appears when a moving subject is detected; the focus and exposure will continuously adjust (Servo AF). • What if a flashing appears? Attach the camera to a tripod so that the camera does not move and blur the image. • What if the camera does not play any sounds? Pressing the p button while turning on the camera power will turn off all sounds. To turn the sounds on, press the n button to choose [Mute] from the 3 tab, then press the qr buttons to choose [Off]. • What if the image comes out dark even if the flash fired when shooting? The subject is too far away for the flash to reach. The effective flash range is approximately 50 cm – 3.5 m (1.6 – 11.5 ft.) from the end of the lens at maximum wide angle (j), and approximately 90 cm – 2.0 m (3.0 – 6.6 ft.) from the end of the lens at maximum telephoto (i). • What if the camera beeps once when the shutter button is pressed halfway? Your subject may be too close. When the camera is at maximum wide angle (j), move about 3 cm (1.2 in.) or more away from your subject and shoot. Move about 90 cm (3.0 ft.) or more away when the camera is at maximum telephoto (i). • What if the lamp lights when the shutter button is pressed halfway? To reduce red-eye and to assist in focusing, the lamp may light when shooting in dark areas. • What if the h icon blinks when you try to shoot? The flash is charging. You can shoot when recharging ends. 20 Viewing Images What if an icon appears in the upper right of the screen? The icon for the determined scene will appear in the upper right of the screen. For details on the icons that appear, see “Scene Icons” (see Camera User Guide). Choosing the subject to focus on (Tracking AF) After pressing the o button and displaying , point the camera so that is on the subject you want to focus on. Press and hold the shutter button halfway to display a blue frame where focus and exposure will be maintained (Servo AF). Press the shutter button fully to shoot. Viewing Images You can view the images you have taken on the screen. Enter Playback mode. • Press the 1 button. • The last image you took will appear. Choose an image. • Pressing the q button will cycle through the images from newest to oldest. • Pressing the r button will cycle through the images from oldest to newest. • Pressing and holding the qr buttons will display images in a line letting you quickly search them. Pressing the m button restores single image playback (see Camera User Guide). • The lens will retract after approximately 1 minute elapses. • Pressing the 1 button again while the lens is retracted will turn off the power. Switching to Shooting mode Pressing the shutter button halfway while in Playback mode switches the camera to Shooting mode. 21 Erasing Images You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Enter Playback mode. • Press the 1 button. • The last image you took will appear. Choose an image to erase. • Press the qrbuttons to display an image to erase. Erase the image. • After pressing the m button, press the opbuttons to choose a, then press the m button again. • [Erase?] appears on the screen. • Press the qrbuttons to choose [Erase], then press the m button. • The displayed image will be erased. • To exit instead of erasing, press the qr buttons to choose [Cancel], then press the m button. Shooting Movies The camera will determine the subject and shooting conditions, and select the best settings for the scene. The audio will record in stereo. If you continue shooting for a long time, the camera may become warm. This is not a malfunction. Choose Amode. • Set the mode switch to A. Remaining Time Elapsed Time Compose the shot. • Moving the zoom lever toward iwill zoom in on your subject, making it appear larger. Moving the lever toward jwill zoom out from your subject, making it appear smaller. Shoot. • Press the movie button. • B...