Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
If anything is missing, contact your camera dealer. Camera AA Alkaline Batteries (x2) Interface Cable Wrist StrapIFC-400PCU WS-800*1 Getting Started DIGITAL CAMERA DIGITAL CAMERA Warranty System (This Guide) Manuals Disk*2Solution Disk*3 Booklet *1 For attachment instructions, refer to the Camera User Guide on the DIGITAL CAMERA Manuals Disk. *2 Contains the Camera User Guide and ImageBrowser EX User Guide (p. 8). *3 Contains software used with the camera. For installation instructions, refer to the Camera User Guide, and for instructions on use, refer to the ImageBrowser EX User Guide. Compatible Memory Cards A memory card is not included. The following memory cards (sold separately) can be used, regardless of capacity. For details on the number of shots and recording time per memory card, refer to “Specifications” in the Camera User Guide. • SD memory cards* • SDHC memory cards* • SDXC memory cards* * Conforms to SD specifications. However, not all memory cards have been verified to work with the camera. Convention in This Guide This guide uses PowerShot A1300 illustrations and screenshots for all explanations. Initial Preparations Initial Preparations Inserting the Batteries and Memory Card For details on compatible batteries, refer to the Camera User Guide. Open the cover. • Slide the cover ( ) and open it ( ). Insert the batteries. • Insert the batteries as shown. Check the card’s write-protect tab and insert the memory card. • Recording is not possible on memory cards with a write-protect tab when the tab is in the locked (downward) position. Slide the tab up until it clicks into the unlocked position. Label • Insert the memory card facing as shown until it clicks into the locked position. • To remove the memory card, push it in until you feel a click, and then slowly release it. Close the cover. • Lower the cover ( ) and hold it down as you slide it, until it clicks into the closed position ( ). 3 Initial Preparations Setting the Date and Time Turn the camera on. • Press the ON/OFF button. • The Date/Time screen is displayed. Set the date and time. • Press the qr buttons to choose an option. • Press the op buttons to specify the date and time. • When finished, press the m button. • To turn off the camera, press the ON/OFF button. Changing the Date and Time Adjust the date and time as follows. Press the n button. Move the zoom lever to choose the 3 tab. Press the op buttons to choose [Date/Time], and then press the m button. Follow step 2 again to complete the setting. Press the n button. Initial Preparations Display Language Enter Playback mode. • Press the 1 button. Access the setting screen and choose a language. • Press and hold the mbutton, and then press the n button. • Press the opqrbuttons to choose a language, and then press the m button. 5 Trying the Camera Out Trying the Camera Out Shooting Turn the camera on and enter A mode. • Press the ON/OFF button. • Press the obutton repeatedly until is displayed. Compose the shot. • To zoom in and enlarge the subject, move the zoom lever toward i (telephoto) as you watch the screen, and to zoom away from the subject, move it toward j (wide angle). Shoot still images. • Press the shutter button lightly ( ). • The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. Press the shutter button all the way down ( ). Shoot movies. • Press the movie button to start shooting, and press it again to stop. Trying the Camera Out Viewing Enter Playback mode. • Press the 1 button. Browse through your images. • To view the previous or next image, press the qr buttons. • Movies are identified by a icon. To play movies, go to step 3. Play movies. • Press the m button to access the movie control panel, press the qr buttons to choose , and then press the m button again. • To adjust the volume, press the op buttons. • Playbac...
Dieses Handbuch ist für folgende Modelle:Kameras - PowerShot A810 (2.33 mb)