Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
..The output of some printers or photo developing services may not reflect the specified print settings. ..Print settings cannot be set for movies. ..Images are printed in order according to the file number. ..A maximum of 998 images can be selected. ..When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed). Setting the Print Style After setting the print style, select the images for printing. The following settings can be selected. *Default setting Print Type Standard* Prints one image per page. Index Prints the selected images together at a reduced size in an index format. Both Prints the images in both the standard and index formats. Date (On/Off*) Adds the date to the print. File No. (On/Off*) Adds the file number to the print. Clear DPOF data (On*/Off) Clears all print settings after the images print. (Print) Menu [Print Settings] . 1 See Menus and Settings (p. 19). 2 Use the or button to select [Print Type], [Date], [File No.], [Clear DPOF data] and then use the or button to specify the settings. Print Settings/Settings 79 ..The Date and File No. settings change according to the Print Type as follows. -Index [Date] and [File No.] cannot be set to [On] at the same time. -Standard or Both [Date] and [File No.] can be set to [On] at the same time, however, the printable information may vary between printers. ..Images dated using (Postcard Date Imprint mode) (p. 33) are always printed with the date, regardless of the [Date] setting. As a result, if [Date] is also set to [On], the date will end up being printed twice on these images. ..Dates print in the style specified in the [Date/Time] menu (p. 23, Basic Guide p. 7). Setting the DPOF Transfer Settings You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. The settings used on the camera comply with the DPOF standards. The icon may display for a memory card with transfer settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera. (Play) Menu . 1 See Menus and Settings (p. 19). Single Images 2 Select [Order] and press . ..Selecting [Reset] cancels all transfer order settings. 3 Use the or button to Transfer Selection select an image to transfer and press . ..Pressing the FUNC./SET button again deselects the setting. ..You can also select images in the index playback mode. All the Images on a Memory Card Print Settings/Settings 2 Select [Mark all] and press . ..Selecting [Reset] cancels all transfer order settings. 3 Select [OK] and press . ..Images are transferred in order according to the file number. ..A maximum of 998 images can be selected. 81 Troubleshooting Camera Camera will not operate. Power is not turned on. Memory card slot/battery cover is open. ..Press the power button (Basic Guide p. 8). ..Confirm that the memory card slot /battery cover is securely closed (Basic Guide p. 5). Batteries are loaded in the wrong direction. Batteries are not the right type. Battery charge is low and the camera will not operate. (“Change the batteries” message displays). Poor contact between camera and battery terminals. ..Reload the batteries in the correct direction (Basic Guide p. 5). ..Use only unused AA-size alkaline batteries or Canon AA-size NiMH batteries (p. 96). ..Replace the camera batteries with 2 unused or fully charged batteries (p. 96). ..Use the AC Adapter Kit ACK800 (sold separately) (p. 102). ..Wipe the battery terminals with a clean dry cloth. ..Reload the batteries several times. Sounds come from the camera interior. The camera’s horizontal/ ..The camera’s orientation vertical orientation was mechanism is operating. There is changed. no malfunction. When the power is turned on “Card locked!” message appears. The SD memory card’s or SDHC memory card’s write protect tab is set to “Write protect”. ..When recording to, erasing from or formatting the memory card, slide the write protect tab upward (p. 98). Troubleshooting The Date/Time menu appears. The lithium date/time battery charge is depleted. ..Replace the lithium date/time battery Troubleshooting The Date/Time menu appears. The lithium date/time battery charge is depleted. ..Replace the lithium date/time battery (p. 109). LCD monitor Not displayed. LCD monitor is set to Off. ..Press DISP. button and turn on the LCD monitor (p. 12). The display darkens. The image in the LCD monitor will darken in strong sunlight or bright light. ..This is a normal occurrence in devices containing CCDs and does not constitute a malfunction. This image will not be recorded when shooting still photos, but it will be recorded when shooting movies. Display flickers. Display flickers when shot under fluorescent lighting. ..This is not a camera malfunction (flickering recorded in movies, but not in still images). A bar of light (...