Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
..OnzD The vertical image is automatically rotated on both the camera’s LCD monitor and on the personal computer. ..OnD The vertical image is automatically rotated only on the personal computer. ..Off The vertical image is not rotated. Auto rotation will not work with vertical images captured while auto rotation was [Off]. They will not rotate even if you later switch it to [On] for playback. ..Immediately after image capture, the vertical image will not be automatically rotated for the image review. ..If the vertical image is taken while the camera is pointed up or down, the image might not rotate automatically for playback. ..If the vertical image is not automatically rotated on the personal computer screen, it means the software you are using is unable to rotate the image. Using the provided software is recommended. Sensor Cleaning The camera has a Self Cleaning Sensor Unit attached to the image sensor’s front layer (low-pass filter) to shake off dust automatically. The Dust Delete Data can also be appended to the image so that the dust spots remaining can be erased automatically by Digital Photo Professional (provided software). About smear adhering to the front of the sensor Besides dust entering the camera from outside, in rare cases lubricant from the camera’s internal parts may adhere to the front of the sensor. In case visible spots still remain after the automatic sensor cleaning, having the sensor cleaned by a Canon Service Center is recommended. Even while the Self Cleaning Sensor Unit is operating, you can press the shutter button halfway to interrupt the cleaning and start shooting immediately. 165 f Automatic Sensor Cleaning Whenever you set the power switch to <1/J> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not be aware of this operation. However, you can execute the sensor cleaning at anytime as well as disable it. Cleaning the Sensor Now 1 Select [Sensor cleaning]. ..Under the [6] tab, select [Sensor cleaning], then press <0>. 2 Select [Clean nowf]. ..Turn the <5> dial to select [Clean nowf], then press <0>. ..Select [OK], then press <0>. • The screen will indicate that the sensor is being cleaned. Although there will be a shutter sound, a picture is not taken. ..For best results, do the sensor cleaning while the camera bottom is placed on a table or other flat surface. ..Even if you repeat the sensor cleaning, the result will not improve that much. Right after the sensor cleaning is finished, the [Clean nowf] option will remain disabled temporarily. Disabling Automatic Sensor Cleaning ..In step 2, select [Auto cleaningf] and set it to [Disable]. • The sensor cleaning will no longer be executed when you set the power switch to <1/J> or <2>. 3 Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots. The Dust Delete Data is used by Digital Photo Professional (provided software) to erase the dust spots automatically. Preparation ..Get a solid-white object (paper, etc.). ..Set the lens focal length to 50mm or longer. ..Set the lens focus mode switch to