Anleitung Canon, modell EOS 6D
Hersteller: Canon
Dateigröße: 39.02 mb
Dateiname:
Unterrichtssprache:
|
 
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
When the image recording is completed, the power will turn off automatically. The battery becomes exhausted quickly. ..Use a fully-charged battery pack (p.28). ..The battery performance may have degraded. See [54: Battery info.] to check the battery’s recharge performance level (p.334). If the battery performance is poor, replace the battery pack with a new one. ..The number of possible shots will decrease with any of the following operations: • Pressing the shutter button halfway for a prolonged period. • Often activating only the AF without taking a picture. • Using the lens’ Image Stabilizer. • Using the LCD monitor often. • Continuing Live View shooting or movie shooting for a prolonged period. • The Eye-Fi card’s transmission is enabled. • GPS is enabled. The camera turns off by itself. ..Auto power off is in effect. If you do not want auto power off to take effect, set [52: Auto power off] to [Disable] (p.55). ..Even if [52: Auto power off] is set to [Disable], the LCD monitor will still turn off after the camera is left idle for 30 min. (The camera’s power does not turn off.) 357 Troubleshooting Guide Shooting-Related Problems The lens cannot be attached. ..The camera cannot be used with EF-S and EF-M lenses (p.39). No images can be shot or recorded. ..Make sure the card is properly inserted (p.31). ..Slide the card’s write-protect switch to the write/erase position (p.31). ..If the card is full, replace the card or delete unnecessary images to make space (p.31, 267). ..If you try to focus in the One-Shot AF mode while the focus confirmation light in the viewfinder blinks, a picture cannot be taken. Press the shutter button halfway again to refocus automatically, or focus manually (p.44, 97). The card cannot be used. ..If a card error message is displayed, see page 33 or 370. Troubleshooting Guide The image is out of focus. ..Set the lens focus mode switch to (p.39). ..To prevent camera shake, press the shutter button gently (p.43, 44). ..If the lens has an Image Stabilizer, set the IS switch to <1> (p.42). ..In low light, the shutter speed may become slow. Use a faster shutter speed (p.144), set a higher ISO speed (p.106), use flash (p.170), or use a tripod. I cannot lock the focus and recompose the shot. ..Set the AF operation to One-Shot AF. Focus lock is not possible in the AI Servo AF and AI Focus AF operations (p.69). The continuous shooting speed is slow. ..Depending on the shutter speed, aperture, subject conditions, brightness, etc., the continuous shooting speed may become slower. The maximum burst during continuous shooting is lower. ..If you shoot something that has fine detail (such as a field of grass), the file size will be larger and the actual maximum burst may be lower than the number mentioned on page 103. 359 Troubleshooting Guide ISO 100 cannot be set. ISO speed expansion cannot be selected. ..If [z4: Highlight tone priority] is set to [Enable], the settable ISO speed range will be ISO 200-25600 (or up to ISO 12800 for movie shooting). Even if you expand the settable ISO speed range in [ISO speed range], you cannot set expanded ISO speeds (L, H, H1, H2). When [z4: Highlight tone priority] is set to [Disable], ISO 100/125/160 can be set (p.130). The Auto Lighting Optimizer cannot be set. ..If [z4: Highlight tone priority] is set to [Enable], the Auto Lighting Optimizer cannot be set. When [z4: Highlight tone priority] is set to [Disable], then the Auto Lighting Optimizer can be set (p.130). Even though I set a decreased exposure compensation, the image comes out bright. ..Set [z3: Auto Lighting Optimizer] to [Disable]. When [Standard/Low/High] is set, even if you set a decreased exposure compensation or flash exposure compensation, the image may come out bright (p.151). The multiple-exposure image is shot in 1 quality. ..When the image-recording quality is set to 41 or 61, the multiple-exposure image will be recorded in 1 quality (p.164). When I use the mode with flash, the shutter speed becomes slow. ..If you shoot at night when the background is dark, the shutter speed becomes slow automatically (slow-sync shooting) so that both the subject and background are properly exposed. To prevent a slow shutter speed, under [z2: External Speedlite control], set [Flash sync. speed in Av mode] to [1/180-1/60 sec. auto] or [1/180 sec. (fixed)] (p.173). Troubleshooting Guide The flash does not fire. ..If you use a non-Canon flash unit with Live View shooting, set [A2: Silent LV shoot.] to [Disable] (p.190). The flash always fires at full output. ..If you use a flash unit other than an EX-series Speedlite, the flash will always be fired at full output (p.171). ..When the [Flash metering mode] flash Custom Function is set to [TTL ] (autoflash), the flash will always be fired at full output (p.177). Flash exposure compensation cannot be set. ..If flash exposure compensation has already been set with the Speedlite, flash exposure compensation cannot be set with the camera. When the ...
)